The scale of global industrial waste generation has reached alarming levels. As a byproduct of human industrial activities, industrial waste has long been a critical challenge in balancing economic growth with environmental sustainability. China's transition from a “waste disposal” mindset to a “resource utilization” paradigm has become not only an environmental imperative but also a strategic economic opportunity. Beyond environmental and economic benefits, this transformation aligns with the global trend in the circular economy. This chapter provides a systematic introduction to the classification and characteristics of industrial wastes, the historical development of resource utilization in China, typical case studies, policy framework in China, challenges and future prospects. The chapter offers detailed descriptions of various processes, operational parameters, practical outcomes and economic benefits. This chapter is intended for researchers, designers and production specialists engaged in environmental protection and resource recycling.
Electrolytic manganese residue (EMR) has caused severe pollution due to its high concentration of water-soluble contaminants, posing a major obstacle to the sustainable development. To address the low utilization of EMR and its associated pollution, mullite-enhanced anorthite ceramics were successfully prepared at temperatures below 1200 °C by using EMR and calcined kaolin (CK). Different EMR/CK ratios, sintering temperatures, and holding times were investigated. The optimal bending strength of 65.09 MPa was obtained at 1160 °C for 60 min with EMR/CK ratio of 1:1. The enhanced mechanical strength originates from the altered crack propagation path caused by in-situ synthesis of mullite microcrystals. Phase composition, microstructure, and thermal analysis revealed that CaO reacts with α-SiO2 to form wollastonite and gehlenite, ultimately synthesizing anorthite above 1100 °C. The spinel-like intermediate during the mullite formation provides most of aluminum source and part of silicon source for anorthite synthesis. This study offers a sustainable solution for solid waste co-disposal and heavy metal pollution control.