Reconfigurable intelligent surface (RIS) is a promising technology for enhancing spectral efficiency (SE) in communication networks. Although discrete phase shifting is cost-effective and preferred for RIS, it cannot always provide the optimal phase shift required to steer the reflected signal in the desired direction, resulting in a performance reduction. Given that the orientation of RIS significantly impacts the amplitude and phase of incident signals, this paper proposes to utilize the RIS orientation as an additional degree of freedom to mitigate the performance degradation caused by discrete phase shifting. To handle the non-convex constraint of the SE upper bound maximization problem, we propose an alternating optimization (AO) algorithm to design RIS phase shift and optimize orientation iteratively. Specifically, the RIS orientation is represented using a rotation matrix, and the optimization principle on the manifold is applied to address the inherent overdetermination of rotation matrices. Simulation results confirm the effectiveness of the proposed algorithm and demonstrate a significant improvement in system performance by incorporating RIS orientation information.
This letter considers an aerial reconfigurable intelligent surface (ARIS)-aided communication system in which the RIS is installed on aerial platforms to provide stable communication services instead of the traditional terrestrial RIS. However, obtaining perfect information about the ARIS location is practically challenging, which can result in performance degradation. This letter presents a robust optimization problem of beamforming and ARIS orientation to minimize transmit power subject to constraints such as rate disruption and ARIS location uncertainty. Particularly, the semi-definite relaxation (SDR) and Bernstein-type inequality are adopted to solve the non-convex constraints in the problem while a rotation matrix represents the ARIS orientation, and we adopt the optimization principle on the manifold to deal with the inherent overdetermination of rotation matrices and to reduce computational complexity. The simulation results verify the robustness and effectiveness of the proposed algorithm.
The future of mobile communication systems is evolving rapidly toward being more intelligent, while also having the ability to interconnect with everything and be aware of the current wireless environment. For complex scenarios, the asymmetry features of channel state information (CSI) will seriously restrict the performance of the communication system. With its accurate positioning technology and high-speed communication rate, ultra-wideband (UWB) has a promising future as a solution to integrate communication and positioning functions. The traditional CSI channel estimation usually requires channel training, which will greatly increase the overhead of the system. This paper proposes a location information-assisted beamforming to replace the traditional channel training process. First, we use the user location parameter information to reconstruct the channel model and derive the CSI error distribution based on the location distribution. Second, considering the uncertainty of the user positioning error, we model the robust beamforming optimization problem that minimizes the total transmit power. To solve this non-convex problem effectively, we design a new beamforming algorithm by using semidefinite relaxation (SDR) and Bernstein-type inequalities. Finally, simulation results verify the robustness of the proposed robust beamforming compared to the worst-case robust beamforming.
30 December 2025 in IEEE Transactions on Communications
5G-enabled unmanned aerial vehicles (UAVs) based emergency communications have attracted considerable attention for their rapid deployment and high-capacity links enabled by UAV mobility and mmWave capabilities. However, most existing studies prioritize service coverage optimization, often neglecting accurate 6D pose estimation of users and UAV-mounted base stations (BSs) calibration, which are crucial for robust beam alignment, positioning, and navigation. Traditional approaches generally assume known BS poses, an assumption invalidated by UAV mobility and deployment uncertainties, resulting in degraded positioning performance. To tackle the challenge of inaccurate BS poses, we first leverage multi-view geometry to estimate clock bias, thereby correcting synchronization errors, and subsequently derive an initial estimate of the user’s 6D pose using delay and angle measurements. Building on this, we propose a multi-view joint estimation framework that simultaneously estimates the user’s 6D pose and calibrates BS poses. This framework integrates a manifold-based BS pose uncertainty model with a hybrid maximum a posterior estimator, which combines prior pose information with the geometry of the Special Euclidean Group SE(3). To benchmark performance, we derive a hybrid Cramér-Rao lower bound under uncertain BS pose priors. Simulation results verify that the proposed method significantly enhances user pose accuracy under BS pose uncertainty, achieving about 75% error reduction compared with the conventional method at a representative transmit power.