This paper proposes a multidirectional piezoelectric vibration energy harvester based on an improved U-shaped structure with cross-connected beams. Benefitting from the bi-directional capacity of U-shaped beam and additional bending mode induced by cross-connected configuration, the proposed structure can well capture the vibrations in 3D space at the frequencies lower than 15 Hz. These features are further validated by finite element analyses and theorical formulas. The prototype is fabricated and the experiments under different conditions are carried out. The results show that the proposed harvester can generate favorable voltage and power under multidirectional vibrations at a low operating frequency. Practical applications of charging capacitors and powering a wireless sensor node demonstrate the feasibility of this energy harvester in supplying power for engineering devices.

To validate the potentials of unequal-length section-varied geometry in developing a orthoplanar spring-based piezoelectric vibration energy harvester (PVEH), a modified spring with quad-trapezoidal-leg configuration is designed, analyzed, and fabricated. A basic quad-trapezoidal-leg orthoplanar spring (QTOPS) is theoretically analyzed, and the structural effective stress and eigenfrequency are formulated to determine the main dimension parameters. Then, an improved QTOPS with additional intermediations is constructed and simulated. Porotypes with different leg geometries and mass configurations are fabricated and tested. The results of QTOPS and a conventional rectangular-shaped spring are compared. It is verified that the proposed approach provides the structure with an enlarged effective stress and lower resonant frequency, which makes it more suitable to construct a high-performance PVEH than the orthoplanar spring with equal-length or rectangular legs.