Wearable devices are ideal for personalized electronic applications in several domains such as healthcare, entertainment, sports and military. Although wearable technology is a growing market, current wearable devices are predominantly battery powered accessory devices, whose form factors also preclude them from utilizing the large area of the human body for spatiotemporal sensing or energy harvesting from body movements. E-textiles provide an opportunity to expand on current wearables to enable such applications via the larger surface area offered by garments, but consumer devices have been few and far between because of the inherent challenges in replicating traditional manufacturing technologies (that have enabled these wearable accessories) on textiles. Also, the powering of e-textile devices with battery energy like in wearable accessories, has proven incompatible with textile requirements for flexibility and washing. Although current e-textile research has shown advances in materials, new processing techniques, and one-off e-textile prototype devices, the pathway to industry scale commercialization is still uncertain. This paper reports the progress on the current technologies enabling the fabrication of e-textile devices and their power supplies including textile-based energy harvesters, energy storage mechanisms, and wireless power transfer solutions. It identifies factors that limit the adoption of current reported fabrication processes and devices in the industry for mass-market commercialization.
Owing to its low relative permittivity, very few microwave sensors have been developed for monitoring ice deposition. This paper presents the first use of UHF RFID tags for wireless RF ice sensing applications. Despite its low permittivity, the existence of ice as a superstrate on a planar ultra-thin dipole antenna can lower the resonance frequency of the antenna significantly. The RFID tags, having a measured unloaded range of 9.4 m, were evaluated for remotely detecting the formation of ice in various scenarios up to 10 m from the reader, as well as monitoring the ice thawing, based on the Relative Signal Strength (RSS) in a phase-free approach. In most RSS-based sensing approaches, the tag's read-range is reduced as the RSS decreases in response to the stimulant. However, the proposed sensing mechanism does not reduce the tag's range; the ice superstrate improves the impedance matching of the tags and increases their radar cross section (RCS), resulting in a 10 m loaded read-range with over 12 dB ice-sensitivity, in an echoic multi-path environment. The proposed sensing mechanism achieves an accuracy of 86% for tags positioned between 0.5 and 10.5 m with various obstructions. When subjected to line-of-sight metallic obstruction, the sensor still maintains 80% accuracy. The long range and high sensitivity of the proposed sensing mechanics show that UHF RFID is a promising method for detecting the formation of ice in future smart cities.
Temperature sensors are one of the most fundamental sensors and are found in industrial, environmental, and biomedical applications. The traditional approach of reading the resistive response of Positive Temperature Coefficient thermistors at DC hindered their adoption as wide-range temperature sensors. Here, we present a large-area thermistor, based on a flexible and stretchable short carbon fibre incorporated Polydimethylsiloxane composite, enabled by a radio frequency sensing interface. The radio frequency readout overcomes the decades-old sensing range limit of thermistors. The composite exhibits a resistance sensitivity over 1000 °C−1, while maintaining stability against bending (20,000 cycles) and stretching (1000 cycles). Leveraging its large-area processing, the anisotropic composite is used as a substrate for sub-6 GHz radio frequency components, where the thermistor-based microwave resonators achieve a wide temperature sensing range (30 to 205 °C) compared to reported flexible temperature sensors, and high sensitivity (3.2 MHz/°C) compared to radio frequency temperature sensors. Wireless sensing is demonstrated using a microstrip patch antenna based on a thermistor substrate, and a battery-less radio frequency identification tag. This radio frequency-based sensor readout technique could enable functional materials to be directly integrated in wireless sensing applications.
Ferroelectret is a thin and flexible cellular polymer foam that generates electrical power under mechanical force. This paper reports the fabrication and testing of an easy to assemble ferroelectret which is made from two fluorinated ethylene propylene (FEP) films and a standard polymer foam formed into a sandwich structure. The measured piezoelectric coefficient d33 of the FEP-porous polymer ferroelectret is 1000 pC N −1 . The energy harvester based on the FEP-porous polymer ferroelectret generate an output power of 6.4 μ W. This is corresponding to volume unit power output of 62.4 μ W cm −3 . The practical electromechanical coupling factor is achieved at 0.107. Within 40 s, a 10 μ F capacitor is charged up to 0.2 V by the FEP-porous polymer ferroelectret harvester through a rectifier.
14 June 2022 in IEEE Open Journal of Antennas and Propagation
Remote ice detection has emerged as an application of Radio Frequency (RF) sensors. While antenna-based “RFID” sensing can detect various measurands, antenna-based sensors are not currently designed based on a systematic methodology, and in most cases may have a low sensitivity requiring specialist hardware or broadband interrogation signals, incompatible with spectrum regulations. Here, we develop a systematic methodology for designing an antenna-based sensor, applicable to measurands inducing a dielectric change in the near-field of the antenna. The proposed methodology is applied to designing printable antennas as highly-sensitive sensors for detecting and measuring the thickness of ice, demonstrating best-in-class sensory response compared to more complex antenna designs. Antenna design is investigated systematically for wireless interrogation in the 2.4 GHz band, where it is found that a loop antenna outperforms a dipole owing to its more distributed capacitance. The antenna’s realized gain was identified as the optimum parameter-under-test, with “positive” sensing proposed as a method of improving linearity and immunity to interference. The developed loop antenna sensor exhibits resilience to interference and applicability to different real-world deployment environments, demonstrated through over 80% average ice thickness measurement accuracy and at least 5 dB real-time sensitivity to ice deposition.