Yuliya Dulyanska

Mrs. Yuliya Dulyanska

Polytechnic University of Viseu, Research Centre for Natural Resources, Environment and Society (CERNAS), Viseu, Portugal
+1
orcid
PhD Student

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 August 2024 in Polymers
Verified
Journal Article
Open access
PDF file
Yuliya DulyanskaYuliya Dulyanska
Yuliya Dulyanska
Luísa Cruz-LopesLuísa Cruz-Lopes
Luísa Cruz-Lopes
Bruno Miguel de Morais Lemos EstevesBruno Miguel de Morais Lemos Esteves
Bruno Miguel de Morais Lemos Esteves
Raquel P. F. GuinéRaquel P. F. Guiné
Raquel P. F. Guiné
IDIdalina de Jesus Domingos
Idalina de Jesus Domingos
Polyalcohol liquefaction can be performed by acid or base catalysis, producing polyols with different properties. This study compared the mechanical properties of foams produced using polyols from liquefied Cytisus scoparius obtained by acid and base catalysis and using two different foam catalysts. The differences were monitored using FTIR analysis. Acid-catalyzed liquefaction yielded 95.1%, with the resultant polyol having an OH index of 1081 mg KOH/g, while base catalysis yielded 82.5%, with a similar OH index of 1070 mg KOH/g. Generally, compressive strength with dibutyltin dilaurate (DBTDL) ranged from 16 to 31 kPa (acid-liquefied polyol) and 12 to 21 kPa (base-liquefied polyol), while with stannous octoate (TIN), it ranged from 17 to 42 kPa (acid) and 29 to 68 kPa (base). Increasing water content generally decreased the compressive modulus and strength of the foams. Higher water content led to a higher absorption at 1670 cm−1 in the FTIR spectrum due to the formation of urea. Higher isocyanate indices generally improved compressive strength, but high amounts led to unreacted isocyanate that could be seen by a higher absorption at 2265 cm−1 and 3290 cm−1. DBTL was shown to be the best foam catalyst due to higher trimer conversion seen in the spectra by a higher absorption at 1410 cm−1. Acid- and base-derived polyols lead to different polyurethane foams with different FTIR spectra, particularly with a higher absorption at 1670 cm−1 for foams from acid-derived liquefaction.

20 May 2022 in Agronomy
Verified
Journal Article
Open access
PDF file
Yuliya DulyanskaYuliya Dulyanska
Yuliya Dulyanska
Luísa Cruz-LopesLuísa Cruz-Lopes
Luísa Cruz-Lopes
Bruno Miguel de Morais Lemos EstevesBruno Miguel de Morais Lemos Esteves
Bruno Miguel de Morais Lemos Esteves
JFJosé Ferreira
José Ferreira
IDIdalina de Jesus Domingos
Idalina de Jesus Domingos
Raquel P. F. GuinéRaquel P. F. Guiné
Raquel P. F. Guiné
Agri-food waste has proved to be a valuable bioresource that can be used to obtain a variety of valuable materials, ingredients and chemicals. The optimum conditions for extracting bioactive compounds from sweet cherry seeds (SCS) with different solvents and temperatures were tested in this work. The choice criteria were based on the most efficient extracting capacity while looking for cleaner techniques with lower health or environmental impacts. Some extracting solvents (methanol, ethanol and water) were tested in different combinations and temperatures. The obtained extracts were evaluated for total phenolic compounds and some families of phenolics as well, using spectrophotometric methods. The results obtained showed that the highest extraction of total phenolic compounds was at 70 °C with 60:40 ratio water:ethanol (2.65 mg GAE/g), while maximum flavonoids were obtained at 80 °C and 50% ethanolic aqueous solution (7.26 mg QE/g). The highest value for ortho-diphenols was 21.47 mg GAE/g for 50 °C and water:ethanol 50:50 solution. The highest proanthocyanidins and flavonols were obtained for 50:50 solution at 70 °C (6.43 mg CE/g and 3.88 mg QE/g, respectively), while the same solution at 80 °C allowed obtaining maximum phenolic acids (1.68 mg CAE/g). The extraction of anthocyanins was found to vary significantly with concentration and temperature, being highest in the range 35–40 °C, when using an 80:20 water:ethanol solution. Hierarchical clustering showed three clusters, while factor analysis resulted in two factors and four groups of samples. In conclusion, it was found that extracts obtained from sweet cherry seeds have relevant bioactive compounds with applications in the food, pharmaceutical or cosmetic industries.

1 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
Luísa Cruz-LopesLuísa Cruz-Lopes
Luísa Cruz-Lopes
JDJoana Duarte
Joana Duarte
Yuliya DulyanskaYuliya Dulyanska
Yuliya Dulyanska
Raquel P. F. GuinéRaquel P. F. Guiné
Raquel P. F. Guiné
Bruno Miguel de Morais Lemos EstevesBruno Miguel de Morais Lemos Esteves
Bruno Miguel de Morais Lemos Esteves
Hazelnut shells (HS), scientifically known as Corylus avellana L. shells, are waste produced by companies that process nuts. The main objective of this study was to find an efficient way to maximize the chemical potential of HS by solubilizing the hemicelluloses, which could then be used to recover sugars and, at the same time, increase the lignin content of this material to produce adhesives or high-strength foams. In order to optimize the pre-hydrolysis process, two different temperatures (160 and 170 °C) and times varying from 15 to 180 min were tested. All the remaining solid materials were then liquefied using polyalcohols with acid catalysis. The chemical composition of hazelnut shells was determined before and after the pre-hydrolysis. All of the process was monitored using Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance (FTIR-ATR) by determining the spectra of solids and liquids after the pre-hydrolysis and liquefaction steps. The highest solubilization of hazelnut shells was found for 170 °C and 180 min, resulting in a 25.8% solubilization. Chemical analysis after the hydrolysis process showed a gradual increase in the solubilization of hemicelluloses as both the temperature and time of the reactor were increased. Simultaneously, the percentages of α-cellulose and lignin in the material also increased with rises in temperature and duration. FTIR-ATR allowed for the detection of significant spectral changes in the hazelnut shells from their initial state to the solid residue and further into the liquefied phase. This confirmed that pre-hydrolysis was effective in enhancing the chemical composition of the material, making it more suitable for the production of adhesives, polyurethane foams, or in the production of bioplastics and composite materials, combined with other biopolymers or synthetic polymers to enhance the mechanical properties and biodegradability of the resulting materials.

23 March 2022 in Foods
Verified
Journal Article
Open access
PDF file
LFLaure Foucher
Laure Foucher
Maria João Mendes Cardoso BarrocaMaria João Mendes Cardoso Barroca
Maria João Mendes Cardoso Barroca
Yuliya DulyanskaYuliya Dulyanska
Yuliya Dulyanska
CPCorreia Reis Paula
Correia Reis Paula
Raquel P. F. GuinéRaquel P. F. Guiné
Raquel P. F. Guiné
The main purpose of this work is the development of a value-added product (candied chestnuts) from Portuguese chestnut (Castanea sativa) cultivars (Martainha, Longal and Judia), as a way to minimize product loss and wastes. To accomplish this goal, the effects of rehydration, cooking, and syrup conditions on composition, textural properties, and colour parameters of candied chestnuts were investigated. The obtained results revealed that the optimal conditions to prepare candied chestnuts with a sweet taste, dark brown colour, with a crispy texture on the outside and smooth texture in the inner flesh were rehydration at 45 °C for a period of 5 h, cooking in a pressure pan for 15 min, and an immersion process with sucrose syrup for two days (syrup with 25% of sucrose on the first day and syrup of 50% of sucrose on the second day). During the process, the drying loss, hydration ratio, and cooking gain of the different cultivars were about 90%, 79%, and 130%, respectively. The total colour difference of candied chestnuts ranged from 24.18 (Longal) to 29.95 (Judia), the stickiness was moderately intense, and the adhesiveness was high for the three varieties. Longal candied chestnuts were the softest and Martainha candied chestnuts were the hardest, the most elastic, and cohesive. Moreover, the candied chestnuts presented a moisture content ranging from 52.70% and 54.23%, amounts of carbohydrates in the range of 88.58 to 91.87 g/100 g d.m, values of protein (6.55–9.51 g/100 g d.m.), values of ash (0.78–1.98 g/100 g d.m.), and fat (0.87–1.58 g/100 g d.m.). In conclusion, the chestnuts of Portuguese cultivars Martainha, Longal and Judia reveal a good potential to produce candied products with high added value.

31 May 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
Yuliya DulyanskaYuliya Dulyanska
Yuliya Dulyanska
Luísa Cruz-LopesLuísa Cruz-Lopes
Luísa Cruz-Lopes
Bruno Miguel de Morais Lemos EstevesBruno Miguel de Morais Lemos Esteves
Bruno Miguel de Morais Lemos Esteves
Raquel P. F. GuinéRaquel P. F. Guiné
Raquel P. F. Guiné
IDIdalina de Jesus Domingos
Idalina de Jesus Domingos
Polyalcohol liquefaction can be done by acid or basic catalysis producing polyols with different properties. This study compared the mechanical properties of foams produced using polyols from liquefied Cytisus scoparius obtained by acid and basic catalysis and using two different foam catalysts. The differences were monitored using FTIR analysis. Acid-catalyzed liquefaction yielded 95.1 %, with the resultant polyol having an OH index of 1081 mg KOH/g while basic catalysis yielded 82.5 %, with a similar OH index of 1070 mg KOH/g. Generally, compressive strength with dibutyltin dilaurate (DBTDL) ranged from 16 - 31 kPa (acid-liquefied polyol) and 12 -21 kPa (base-liquefied polyol), while with stannous octoate (TIN), it ranged from 17 - 42 kPa (acid) and 29 - 68 kPa (base). Increasing water content generally decreased the compressive modulus and strength of foams. Higher water content led to a higher absorption at 1670 cm-1 in the FTIR spectrum due to the formation of urea. Higher isocyanate indices generally improved compressive strength, but high amounts led to unreacted isocyanate that could be seen by a higher absorption at 2265 cm-1 and 3290 cm-1. DBTL was shown to be the best foam catalyst due to higher trimer conversion seen in the spectra by a higher absorption at 1410 cm-1. Acid and base-derived polyols lead to different polyurethane foams with different FTIR spectra, particularly with a higher absorption at 1670 cm-1 for foams from acid-derived liquefaction.

4 December 2024 in Agronomy
Verified
Journal Article
Open access
PDF file
Luísa Cruz-LopesLuísa Cruz-Lopes
Luísa Cruz-Lopes
Yuliya DulyanskaYuliya Dulyanska
Yuliya Dulyanska
RLRogério Lopes
Rogério Lopes
IDIdalina de Jesus Domingos
Idalina de Jesus Domingos
JFJosé Ferreira
José Ferreira
Bruno Miguel de Morais Lemos EstevesBruno Miguel de Morais Lemos Esteves
Bruno Miguel de Morais Lemos Esteves
Arbutus unedo (strawberry tree) is a small Mediterranean tree capable of vigorous regrowth after disturbances like fire. Traditionally used for biomass fuel, its bark and branches hold potential for higher-value products through ecovalorization into liquid mixtures that could replace petroleum-based materials. This study aimed to explore the chemical composition of various components of Arbutus unedo and to produce a liquefied material from its internal (IB) and external bark (EB). Chemical compositions of internal and external bark were determined using TAPPI standards including ash, extractive content, lignin, and cellulose. Metal cations were analyzed by ICP. Liquefaction of bark was optimized in a PARR reactor, evaluating factors such as particle size, temperature, and time, and the best polyols were monitored by FTIR-ATR. Polyurethane foams were made with internal and external bark materials liquefied by polymerization with isocyanate, a catalyst, and water as a blowing agent. Results showed that EB has a higher extractive and lignin content, while IB contains more cellulose. Liquefaction yields were higher for IB (74%) than EB (68%), with IB yielding polyols that produced stronger and more resilient foams with higher compressive strength and modulus of elasticity. Mechanical properties of the foams were influenced by the NCO/OH ratio and catalyst levels. Overall, the internal bark demonstrated superior performance for foam production, highlighting its potential as an eco-friendly alternative to petroleum-derived materials.