This study shows the inhibitory activity of the hexane, acetone and methanol extracts of Brugmansia arborea (B. arborea) during the corrosion of 1018 steel in 0.5 M of H₂SO₄. This was carried out by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization curves (PDP) techniques. The maximum efficiency for the three extracts was registered with 400 and 500 ppm concentrations, obtaining 98% by EIS and 80% by PDP. Through PDP, an inhibition behavior of the cathodic type was determined. During the residence time test, B. arborea reached a maximum inhibition efficiency of 98% at 24 h with acetone extract and at 20 h with methanol extract. The compound's chemical structure present in B. arborea was analyzed by the Fourier Transform infrared spectroscopy technique, and the presence of functional groups such as the amines was observed. The reason why an inhibitory activity is attributed to these compounds is because they contain nitrogen that may easily form complexes that are strongly adsorbed creating a thin layer on the metallic surface. GRAPHICAL ABSTRACT

The present work is related to the treatment of crushed waste of printed circuit boards (WPCBs) from electrical and electronic devices (WEEE), carrying out the recovery of copper in solution. In the first stage, the studied material was characterized by AAS, SEM-EDS, and XRD. The results revealed significantly high amounts of copper (744.42 mg/g), compared with the rest of the metals present in the sample, mainly iron and zinc. In the second stage of the work, alkali dynamic leaching experiments were carried out in the ${\mathrm{S}}_2{\mathrm{O}}_3^{-2}-{ \mathrm{O}}_2$ medium, evaluating important kinetic variables in order to verify the controlling step of the system and adjust the data to a kinetic model. According to the results obtained from the various experimental tests executed, it was found that in the studied system of ${\mathrm{S}}_2{\mathrm{O}}_3^{-2}-{ \mathrm{O}}_2$, the leaching of copper was preferably adjusted to the model of spherical particles with a shrinking core finding a mixed chemical–diffusive control, with values of E_a = 25.78 kJ/mol and n = 0.22 (for the leaching reagent), indicating that the reaction was controlled by the oxygen transport to the solid–liquid interface and also by the chemical reaction in the surface of particles, obtaining up to 99.82% copper in solution.

In this work, two oligophenyleneimines type pentamers with terminal aldehydes, designated as DAFCHO (4,4′-((((((2,5-bis(octyloxy)-1,4-phenylene)bis(methanylylidene))bis(azanyl ylidene))bis(9H-fluorene-7,2-diyl))bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy) benzaldehyde)) and FDACHO (4,4′-((((((2,5-bis(octyloxy)-1,4-phenylene)bis(methanylylidene))bis (azanylylidene))bis(4,1-phenylene))bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy) benzaldehyde)) were synthesized by mechanochemistry method using 2,5-bis(octyloxy) terephtal aldehyde and 2,7-diaminofluorene or 1,4-phenylenediamine. All compounds were spectroscopically characterized using ¹H and ¹³C-NMR, FT-IR and mass spectrometry MALDITOF. The optical properties of the compounds were analyzed by UV-vis spectroscopy using different solvents. We observed that DAFCHO and FDACHO exhibit interesting photochromic properties when they are dissolved in chloroform and exposed to sunlight for 3, 5 and 10 min. The value of the energy band gap was calculated from the absorption spectra without irradiation E_gap(optical). It was 2.50 eV for DAFCHO in chloroform solution, and it decreased to 2.34 eV when it is in films. For FDACHO, it was 2.41 eV in solution and 2.27 eV in film. HOMO (Highest Occupied Molecular Orbital), LUMO (Lowest Unoccupied Molecular Orbital) and E_{gap(electrochemical)} values were obtained by electrochemical studies. The results indicate that the compounds can be considered as organic semiconductors since their values are 2.35 eV for DAFCHO and 2.06 eV for FDACHO. The structural and electronic properties of the compounds were corroborated with a DFT (Density Functional Theory) study.

A π-conjugated polymer (PBQT) containing bis-(2-ethylhexyloxy)-benzo [1,2-b’] bithiophene (BDT) units alternated with a quinoline-vinylene trimer was obtained by the Stille reaction. The chemical structure of the polymer was verified by nuclear magnetic resonance (¹H NMR), Fourier transform infrared (FT-IR), and mass spectroscopy (MALDI-TOF). The intrinsic photophysical properties of the solution were evaluated by absorption and (static and dynamic) fluorescence. The polymer PBQT exhibits photochromism with a change in absorption from blue (449 nm) to burgundy (545 nm) and a change in fluorescence emission from green (513 nm) to orange (605 nm) due to conformational photoisomerization from the trans to the cis isomer, which was supported by theoretical calculations DFT and TD-DFT. This optical response can be used in optical sensors, security elements, or optical switches. Furthermore, the polymer forms spin-coated films with absorption properties that cover the entire visible range, with a maximum near the solar emission maximum. The frontier molecular orbitals, HOMO and LUMO, were calculated by cyclic voltammetry, and values of −5.29 eV and −3.69, respectively, and a bandgap of 1.6 eV were obtained, making this material a semiconductor with a good energetic match. These properties could suggest its use in photovoltaic applications.

For decades, jarosites have been precipitated by controlling Fe in hydrometallurgical circuits. In addition, their synthesis, characterization, precious metals incorporation, decomposition and leaching have led to important results in this field. Nowadays, new topics related to the synthesis of these compounds have directed studies for applications such as lithium-ion batteries (as cathodes or/and anodes). Additionally, in this work, the evaluation of these kinds of compounds as biomaterials to be used in bone tissue engineering is shown, which is a novel application of these jarosite type-compounds. The method used for the synthesis of these compounds has been improved, decreasing the temperature (from 95 to 70 °C) and synthesis time (from 24 to only 3 h), which allows the doping of the potassium jarosite with calcium, strontium and magnesium (JKCa, JKCa2 and JKAll). The powders obtained this way were characterized confirming the incorporation of these elements into the structure, and the biological assays allowing the cell proliferation at 10 days conclude that these compounds are viable as a biomaterial, due to their non-toxic property. On the other hand, these jarosites show osteoinduction when added to the swine dental pulp stem cells and can be used for orthodontic purpouses.