Dennis Slort

Dennis Slort


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
EBEvert Boymans
Evert Boymans
TNTom Nijbacker
Tom Nijbacker
DSDennis Slort
Dennis Slort
SGSander Grootjes
Sander Grootjes
BVBerend Vreugdenhil
Berend Vreugdenhil
Advanced biofuels are required to facilitate the energy transition away from fossil fuels and lower the accompanied CO2 emissions. Particularly, jet fuel needs a renewable substitute, for which novel production routes and technology are needed that are more efficient and economically viable. The direct conversion of bio-syngas into fuel is one such development that could improve the efficiency of biomass for jet fuel processes. In this work, bifunctional catalysts based on hierarchical zeolites are prepared, tested and evaluated for their potential use in the production of actual jet fuel. The bifunctional catalysts Co/H-mesoZSM-5, Co/H-mesoBETA and Co/H-mesoY have been applied, and their performance is compared with their microporous zeolite-based counterparts and two conventional Fischer–Tropsch Co catalysts. Co/H-mesoZSM-5 and Co/H-mesoBETA showed great potential for the direct production of jet fuel as bifunctional catalysts. Besides the high jet fuel yields under Fischer–Tropsch synthesis conditions at, respectively, 30.4% and 41.0%, the product also contained the high branched/linear hydrocarbon ratio desired to reach jet fuel specifications. This reveals the great potential for the direct conversion of syngas into jet fuel using catalysts that can be prepared in few steps from commercially available materials.

19 January 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
DZDouwe Sjirk Zijlstra
Douwe Sjirk Zijlstra
MVMark Visser
Mark Visser
ECEsther Cobussen-Pool
Esther Cobussen-Pool
DSDennis Slort
Dennis Slort
PNPavlina Nanou
Pavlina Nanou
HWHeather E. Wray
Heather E. Wray
The ever-increasing volumes of food waste generated and the associated environmental issues require the development of new processing methods for these difficult waste streams. One of the technologies that can treat these waste streams directly is hydrothermal carbonization. In this work, olive pomace and orange peels were treated via a mild hydrothermal carbonization process (TORWASH®) in a continuous-flow pilot plant. For olive pomace, a solid yield of 46 wt% and a dry matter content of 58% for the solid press cakes were obtained during continuous operation for 18 days. For orange peels, the values were lower with 31 wt% solid yield and a 42% dry matter content during 28 days of continuous operation. These values corresponded fully with initial laboratory-scale batch experiments, showing the successful transformation from batch to continuous processing. The obtained hydrochar from both feedstocks showed an increase in higher heating value (HHV) and a significant reduction in ash content. Pellets produced from the solids met the requirements for industrial use, demonstrating a large increase in the deformation temperature and a significant reduction in the potassium and chlorine content compared to the original feedstock. These results indicate the excellent potential of these pellets for combustion applications.

14 December 2022 in Processes
Verified
Journal Article
Open access
PDF file
DZDouwe Sjirk Zijlstra
Douwe Sjirk Zijlstra
ECEsther Cobussen-Pool
Esther Cobussen-Pool
DSDennis Slort
Dennis Slort
MVMark Visser
Mark Visser
PNPavlina Nanou
Pavlina Nanou
HWHeather E. Wray
Heather E. Wray
Sludges from the papermaking industry represent a challenging residue stream that is difficult to dewater using conventional processes. The successful development and scale-up of innovative processes from lab- to pilot- to industrial-scale are required to tackle challenges for waste treatment, including paper sludges. Biological paper sludge was treated via a mild hydrothermal carbonization process (TORWASH®) to improve dewaterability of the sludge, including long-duration, continuous testing. Initial lab-scale experiments indicated the optimal treatment temperature for sludge dewatering was 190 °C. Dewaterability improved with increasing temperature, but the obtained solid yield decreased. Scaling-up to a continuous flow pilot plant required a temperature of 200 °C to achieve optimum dewatering. Pilot-scale hydrothermal treatment and dewatering resulted in solid cakes with an average dry matter content of 38% and a solid yield of 39%. This study demonstrates the benefits of hydrothermal carbonization for the dewatering of biological paper sludge without the use of dewatering aids such as fiber sludge or polyelectrolytes. The results also demonstrate the successful adaptation of a lab-scale batch process to a pilot-scale continuous flow process for hydrothermal carbonization of industrial wastewater sludge.