Hydrothermal carbonization (HTC) of low quality, wet biogenic residues into intermediate bioenergy carriers can potentially contribute to a more flexible and stable renewable energy system and reduce environmental impacts compared to current residue disposal practices. This study quantifies the environmental impacts via life cycle assessment (LCA) of a novel hydrothermal process for the treatment on an industrial scale of application of three wet biogenic residues (paper bio-sludge, olive pomace, and orange peel) into bioenergy carriers, i.e., solid pellets and biogas. A comprehensive attributional cradle-to-gate life cycle assessment (LCA) was conducted; the life cycle impact assessment (LCIA) utilised the ReCiPe impact assessment method. A selection of 10 significant impact categories was prioritised. Reliability of this categorization was also ensured through a sensitivity analysis carried out using Monte Carlo simulation. Climate change, particulate matter formation and terrestrial acidification impact categories showed the highest reliability, while for freshwater ecotoxicity and freshwater eutrophication impact categories in the study suggest the need for more robust data and further investigation. The climate change impact category presents the following values, as kg CO2eq/tresidue: pulp and paper bio-sludge (PPB), 17.9; olive pomace (OP), −1290; orange peel (ORP), −1301. The LCA study compared electricity yields of the hydrothermal treatment process with conventional treatment processes for each of the target residue streams. The environmental performance of the proposed hydrothermal treatment benefits significantly from the combination of intermediate bioenergy carriers (pellets) from the solid fraction with biogas production from the liquid fraction. Avoided emissions due to the heat recovery provide further environmental benefits. The LCIA results show that the carbon footprint of the F-CUBED production system, as kgCO2eq/kWhe, accounts for –4.56, −0.63, and −0.25 for paper bio-sludge, olive pomace and orange peel, respectively.
The ever-increasing volumes of food waste generated and the associated environmental issues require the development of new processing methods for these difficult waste streams. One of the technologies that can treat these waste streams directly is hydrothermal carbonization. In this work, olive pomace and orange peels were treated via a mild hydrothermal carbonization process (TORWASH®) in a continuous-flow pilot plant. For olive pomace, a solid yield of 46 wt% and a dry matter content of 58% for the solid press cakes were obtained during continuous operation for 18 days. For orange peels, the values were lower with 31 wt% solid yield and a 42% dry matter content during 28 days of continuous operation. These values corresponded fully with initial laboratory-scale batch experiments, showing the successful transformation from batch to continuous processing. The obtained hydrochar from both feedstocks showed an increase in higher heating value (HHV) and a significant reduction in ash content. Pellets produced from the solids met the requirements for industrial use, demonstrating a large increase in the deformation temperature and a significant reduction in the potassium and chlorine content compared to the original feedstock. These results indicate the excellent potential of these pellets for combustion applications.
Sludges from the papermaking industry represent a challenging residue stream that is difficult to dewater using conventional processes. The successful development and scale-up of innovative processes from lab- to pilot- to industrial-scale are required to tackle challenges for waste treatment, including paper sludges. Biological paper sludge was treated via a mild hydrothermal carbonization process (TORWASH®) to improve dewaterability of the sludge, including long-duration, continuous testing. Initial lab-scale experiments indicated the optimal treatment temperature for sludge dewatering was 190 °C. Dewaterability improved with increasing temperature, but the obtained solid yield decreased. Scaling-up to a continuous flow pilot plant required a temperature of 200 °C to achieve optimum dewatering. Pilot-scale hydrothermal treatment and dewatering resulted in solid cakes with an average dry matter content of 38% and a solid yield of 39%. This study demonstrates the benefits of hydrothermal carbonization for the dewatering of biological paper sludge without the use of dewatering aids such as fiber sludge or polyelectrolytes. The results also demonstrate the successful adaptation of a lab-scale batch process to a pilot-scale continuous flow process for hydrothermal carbonization of industrial wastewater sludge.