Nickel-based super alloys are popular for applications in the energy and aerospace industries due to their excellent corrosion and high-temperature resistance. Direct metal deposition (DMD) of nickel alloys has reached technology readiness for several applications, especially for the repair of turbomachinery components. However, issues related to part quality and defect formation during the DMD process still persist. Laser remelting can effectively prevent and repair defects during metal additive manufacturing (AM); however, very few studies have focused on numerical modeling and experimental process parameter optimization in this context. Therefore, the aim of this study is to investigate the effect of determining the remelting process parameters via numerical simulation and experimental analyses in order to optimize an industrial process chain for part repair by DMD. A heat conduction model analyzed 360 different process conditions, and the predicted melt geometry was compared with observations from a fluid flow model and experimental single tracks for selected reference conditions. Subsequently, the remelting process was applied to a demonstrator repair case. The results show that the models can well predict the melt pool shape and that the optimized remelting process increases the bonding quality between base and DMD materials. Therefore, DMD part fabrication and repair processes can benefit from the remelting step developed here.
Additive manufacturing processes are among the most innovative manufacturing processes of this century. Powder-based direct metal deposition (DMD) is one of these processes. In the DMD process, local shielding takes place via the powder nozzle. The process is therefore critical for oxidation, especially for materials with an affinity for oxidation such as titanium, aluminum and their alloys. In order to study the oxidation behavior in more detail, the present gas dynamics must be further understood. Wirth and Wegener have made a first approach with their gas flow simulation. In this study, a measurement method for spatial oxygen concentration determination is presented. It can be shown that the spatial oxygen concentration follows the nozzle geometry. Furthermore, the coaxial nozzle is superior to the three-jet nozzle with respect to a low oxygen concentration from a carrier gas to shielding gas volume flow ratio of equal to or greater than 0.4. Finally, it can be shown that the use of a shielding gas chamber eliminates the optimization of the gas flow settings.
The efficient fabrication of titanium components using laser direct metal deposition (DMD) is gaining significant importance in the aerospace and medical sectors. The DMD process must be appropriately designed to address the issue of oxidation, as titanium exhibits a high affinity for oxygen. The carrier gas flow and shield gas flow, which have been considered secondary factors so far, are shown to exert a substantial influence on the gas dynamics of the DMD process. By varying these parameters, it is possible to identify the influence of the gas volume flows on the oxidation behavior exhibited during the DMD process. To quantify the oxygen uptake in titanium structures during buildup, hot carrier gas extraction is employed. Experiments are conducted using both a three-jet and a coaxial nozzle to assess the influence of nozzle geometry. Additionally, the experiments are conducted within a shielding gas chamber to demonstrate the benefits of such a chamber in mitigating oxidation. Finally, the study reveals that by appropriately combining the parameters of carrier gas volume flow, shield gas volume, and travel speed, it is possible to fabricate titanium components, which fulfill the requirements regarding oxygen content of aerospace and medical applications even without the utilization of a shielding gas chamber.
The production of materials with a high affinity for oxidation using the direct metal deposition (DMD) process requires an extended process examination that goes beyond the usual, purely energetic consideration, with the aim of providing sufficient energy to melt the substrate and the powder material supplied. This is because the DMD process does not allow any conclusions to be drawn as to whether it and its respective selected parameters result in an oxidation critical process. To assess this, a superposition of the temperature field with the existing spatial oxygen concentration is required. This work uses this approach to develop an oxidation model that reduces oxidation during the DMD process. In addition to the numerical model, an analytical model is derived, with which the temperature of a material element can be calculated analytically and the resulting boundary oxygen concentration calculated using Fick’s 2nd law. The model also takes into account two-stage oxidation kinetics for Ti alloys. The effect of too high a travel speed (with the same specific energy of the other experiments) is shown visually in the numerical calculation of the temperature field. However, if the process model is taken into account, the components do fulfil the specified requirements. Finally, the effect of oxidation on the microstructure, microhardness, ultimate strength, yield strength and elongation at failure of Ti6Al4V structures produced using DMD is also investigated, and further supports our conclusions regarding the effectiveness of the proposed model.