Additive manufacturing processes are among the most innovative manufacturing processes of this century. Powder-based direct metal deposition (DMD) is one of these processes. In the DMD process, local shielding takes place via the powder nozzle. The process is therefore critical for oxidation, especially for materials with an affinity for oxidation such as titanium, aluminum and their alloys. In order to study the oxidation behavior in more detail, the present gas dynamics must be further understood. Wirth and Wegener have made a first approach with their gas flow simulation. In this study, a measurement method for spatial oxygen concentration determination is presented. It can be shown that the spatial oxygen concentration follows the nozzle geometry. Furthermore, the coaxial nozzle is superior to the three-jet nozzle with respect to a low oxygen concentration from a carrier gas to shielding gas volume flow ratio of equal to or greater than 0.4. Finally, it can be shown that the use of a shielding gas chamber eliminates the optimization of the gas flow settings.
The efficient fabrication of titanium components using laser direct metal deposition (DMD) is gaining significant importance in the aerospace and medical sectors. The DMD process must be appropriately designed to address the issue of oxidation, as titanium exhibits a high affinity for oxygen. The carrier gas flow and shield gas flow, which have been considered secondary factors so far, are shown to exert a substantial influence on the gas dynamics of the DMD process. By varying these parameters, it is possible to identify the influence of the gas volume flows on the oxidation behavior exhibited during the DMD process. To quantify the oxygen uptake in titanium structures during buildup, hot carrier gas extraction is employed. Experiments are conducted using both a three-jet and a coaxial nozzle to assess the influence of nozzle geometry. Additionally, the experiments are conducted within a shielding gas chamber to demonstrate the benefits of such a chamber in mitigating oxidation. Finally, the study reveals that by appropriately combining the parameters of carrier gas volume flow, shield gas volume, and travel speed, it is possible to fabricate titanium components, which fulfill the requirements regarding oxygen content of aerospace and medical applications even without the utilization of a shielding gas chamber.