Zane Zelca

Dr. Zane Zelca

Riga Technical University, Riga, Rīga, Latvia
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 June 2022 in Membranes
Verified
Journal Article
Open access
PDF file
ZZZane Zelca
Zane Zelca
AKAndres Krumme
Andres Krumme
SKSilvija Kukle
Silvija Kukle
MVMihkel Viirsalu
Mihkel Viirsalu
Laimdota VilcenaLaimdota Vilcena
Laimdota Vilcena
Electrospun polymer nanofiber materials have been studied as basic materials for various applications. Depending on the intended use of the fibers, their morphology can be adjusted by changing the technological parameters, the properties of the spinning solutions, and the combinations of composition. The aim of the research was to evaluate the effect of electrode type, spinning parameters, polymer molecular weight, and solution concentration on membranes morphology. The main priority was to obtain the smallest possible fiber diameters and homogeneous electrospun membranes. As a result, five electrode types were selected, the lowest PVA solution concentration for stable spinning process was detected, spinning parameters for homogenous fibers were obtained, and the morphology of electrospun fiber membranes was analyzed. Viscosity, conductivity, pH, and density were evaluated for PVA polymers with five different molecular weights (30–145 kDa) and three concentration solutions (6, 8, and 10 wt.%). The membrane defects and fiber diameters were compared as a function of molecular weight and electrode type. The minimum concentration of PVA in the solution allowed more additives to be added to the solution, resulting in thinner diameters and a higher concentration of the additive in the membranes. The molecular weight, concentration, and electrode significantly affected the fiber diameters and the overall quality of the membrane.

25 October 2017 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
ZZZane Zelca
Zane Zelca
SKS Kukle
S Kukle
JKJ Kajaks
J Kajaks
The research is focused on the characterization of matrix and filler adhesion, interfacial modifier effects on matrix crystalline formation with filler, depending on the filler modification strategies. Natural fiber filled linear low density polyethylene (LLDPE) composites made from surface modified hemp fiber and waste, zinc oxide, using matrix modifier were prepared by two rolls mill and characterize by Atomic Force Microscope (AFM).

2 April 2022 in Molecules
Verified
Journal Article
Open access
PDF file
ZZZane Zelca
Zane Zelca
SKSilvija Kukle
Silvija Kukle
SJSarmite Janceva
Sarmite Janceva
Laimdota VilcenaLaimdota Vilcena
Laimdota Vilcena
A load-bearing matrix filled with biologically active compounds is an efficient method for transporting them to the target location. Bee-made propolis has long been known as a natural product with antibacterial and antiviral, anti-inflammatory, antifungal properties, and anti-oxidative activity. The aim of the research is to obtain stable propolis/PVA solutions and produce fibers by electrospinning. To increase propolis content in fibers as much as possible, various types of propolis extracts were used. As a result of the research, micro- and nano-fiber webs were obtained, the possible use of which have biomedical and bioprotective applications. All used materials are edible and safe for humans, and fiber webs were prepared without using any toxic agent. This strategy overcomes propolis processing problems due to limitations to its solubility. The integration of different combinations of extracts allows more than 73 wt% of propolis to be incorporated into the fibers. The spinning solution preparation method was adapted to each type of propolis, and by combining the methods, solutions with different propolis extracts were obtained. Firstly, the total content of flavonoids in the propolis extracts was determined for the assessment and prediction of bioactivity. The properties of the extracts relevant for the preparation of electrospinning solutions were also evaluated. Secondly, the most appropriate choice of PVA molecular weight was made in order not to subject the propolis to too high temperatures (to save resources and not reduce the bioactivity of propolis) during the solution preparation process and to obtain fibers with the smallest possible diameter (for larger surface-to-volume ratios of nanofibers and high porosity). Third, electrospinning solutions were evaluated (viscosity, pH, conductivity and density, shelf life) before and after the addition of propolis to predict the maximum propolis content in the fibers and spinning stability. Each solution combination was spun using a cylindrical type electrode (suitable for industrial production) and tested for a stable electrospinning process. Using adapted solution-mixing sequences, all the obtained solutions were spun stably, and homogeneous fibers were obtained without major defects.

24 October 2023 in Processes
Verified
Journal Article
Open access
PDF file
SKSilvija Kukle
Silvija Kukle
JBJuris Blūms
Juris Blūms
AKAlexei Katashev
Alexei Katashev
IBIeva Baķe
Ieva Baķe
VJVilnis Jurķāns
Vilnis Jurķāns
AOAlexander Oks
Alexander Oks
In many smart textile development studies, sensors and electro-conductive yarns have been widely investigated and used as essential components, especially in the fields of medicine, sport, work wear, and special applications. Wearable sensors provide a means to monitor the wearer’s health through physiological measurements in a natural setting or are used to detect potential hazards and alert users and/or caretakers. The aim of the research is to develop a prototype of wearable electronics that consists of high-performance clothing with an integrated energy harvesting system for converting the mechanical energy of human movements into electrical energy. Within the framework of the research, a system for determining human physiological and/or environmental parameters and transmitting data was developed and integrated into clothing modified with sol–gel technology for indoor and outdoor use. Although the created flat inductive elements of the energy harvesting system retain their performance during the hydrothermal treatment process, at the same time, the other elements of the smart clothing system (especially electro-conductive yarns) rapidly lose their electrical conductivity. The modified knitwear provided a longer time between washing cycles to protect the embedded wearable electronics, and the impact of surface modification with sol–gel on wearing comfort was evaluated.

15 April 2016 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
SKS Kukle
S Kukle
RVR Vidzickis
R Vidzickis
ZZZane Zelca
Zane Zelca
DBD Belakova
D Belakova
JKJ Kajaks
J Kajaks
In present research with short hemp fibres reinforced LLDPE matrix composites with fibres content in a range from 30 to 50 wt% subjected to four different pre-processing technologies were produced and such their properties as tensile strength and elongation at break, tensile modulus, melt flow index, micro hardness and water absorption dynamics were investigated. Capillary viscosimetry was used for fluidity evaluation and melt flow index (MFI) evaluated for all variants. MFI of fibres of two pre-processing variants were high enough to increase hemp fibres content from 30 to 50 wt% with moderate increase of water sorption capability.

19 July 2023 in Molecules
Verified
Journal Article
Open access
PDF file
ZZZane Zelca
Zane Zelca
Remo Merijs-MeriRemo Merijs-Meri
Remo Merijs-Meri
AKAndres Krumme
Andres Krumme
ABAina Bernava
Aina Bernava
In this study, propolis additives provide antibacterial and antifungal effects that prolong the product’s shelf life. The aim of the study is to obtain homogeneous fiber membranes of polyvinyl alcohol and propolis by the electrospinning method and to evaluate their suitability for food packaging. Three propolis extracts are used in the study—water, ethyl alcohol, and glycerin-based. The membranes’ morphology and fiber diameter distribution, tensile deformation, air permeability, thermogravimetric analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, and microbiological tests (Listeria monocytogenes, Salmonella enteritidis, Escherichia coli) were analyzed for electrospun samples. The results of the study show that propolis extracts are incorporated into membranes and the additive provides an antimicrobial effect with the contact surface. The obtained membranes are breathable: gas exchange can be controlled by using a material of appropriate thickness (air permeability coefficient is 0.046 and 0.276 mm/s). The mechanical properties of membranes are affected by moisture, but tensile strength can be improved with thermal post-processing at 100 °C. The propolis-containing fibers’ diameters are from 293 ± 8 to 664 ± 11 nm. Depending on membranes’ demonstrated properties, it can be concluded that the composites have the potential to increase the shelf life of fresh fruits and berries.