Aina Bernava

Mrs. Aina Bernava

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 March 2018 in Proceedings of the Estonian Academy of Sciences
Verified
Journal Article
Open access
ABAina Bernava
Aina Bernava
SRSkaidrite Reihmane
Skaidrite Reihmane
Linen textiles appear to be some of the oldest in the world. Nowadays flax fibres are coming back to the fashion industry thanks to their freshness, comfort, and innovative technologies providing the elegance of and demand for linen clothing. Direct dyes are popular for dyeing cellulosic fibres due to their reasonable price and easy use. As the first synthetic dyes they are currently used for dyeing textile materials in order to repair and consolidate the threads. Unfortunately, these dyes have only moderate fastness properties. Many studies have been conducted to improve substantivity of anionic direct dyes for cellulosic materials. In most cases the suggested methods are expensive and technologically complicated. We examined the colour properties of the fabric dyed with direct dyes in the case the linen fabric was modified by alkali and enzyme BEISOL PRO treatment. To evaluate the modification effect, the colour characteristics before and after light test were used, and the fastness to rubbing as well as mechanical properties were determined. The colour characteristics of dyed fabrics and the fastness to rubbing differed depending on the used dye. The wet fastness to rubbing was lower than the dry fastness. The tensile strength and elongation in the warp direction were superior in all cases and did not depend on the used dye. The influence of modification type on fabric light resistance was not significant.

19 July 2023 in Molecules
Verified
Journal Article
Open access
PDF file
ZZZane Zelca
Zane Zelca
Remo Merijs-MeriRemo Merijs-Meri
Remo Merijs-Meri
AKAndres Krumme
Andres Krumme
ABAina Bernava
Aina Bernava
In this study, propolis additives provide antibacterial and antifungal effects that prolong the product’s shelf life. The aim of the study is to obtain homogeneous fiber membranes of polyvinyl alcohol and propolis by the electrospinning method and to evaluate their suitability for food packaging. Three propolis extracts are used in the study—water, ethyl alcohol, and glycerin-based. The membranes’ morphology and fiber diameter distribution, tensile deformation, air permeability, thermogravimetric analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, and microbiological tests (Listeria monocytogenes, Salmonella enteritidis, Escherichia coli) were analyzed for electrospun samples. The results of the study show that propolis extracts are incorporated into membranes and the additive provides an antimicrobial effect with the contact surface. The obtained membranes are breathable: gas exchange can be controlled by using a material of appropriate thickness (air permeability coefficient is 0.046 and 0.276 mm/s). The mechanical properties of membranes are affected by moisture, but tensile strength can be improved with thermal post-processing at 100 °C. The propolis-containing fibers’ diameters are from 293 ± 8 to 664 ± 11 nm. Depending on membranes’ demonstrated properties, it can be concluded that the composites have the potential to increase the shelf life of fresh fruits and berries.

5 April 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
ABAina Bernava
Aina Bernava
SRS Reihmane
S Reihmane
Reactive dyes are one of the most popular dyes for cotton goods and other cellulosic fibres. The main investigations for application of reactive dyes for cellulosic fibres are devoted to cotton textiles. In this paper the research results of investigation of colour properties, colour and rubbing fastness, mechanical properties of pre-modified with alkali and enzyme linen fabric dyed with colour triad of Cibacron reactive dyes are presented. The investigation results show that the main factor influencing the colour properties of linen fabric dyed with examined reactive dyes is used dye. The modifiers use increases the rubbing fastness of dyed linen textile. The modifiers influence on colour and colour properties before and after light test is selective for used dye, but not significant.

15 October 2026 in Polymers
Verified
Journal Article
Open access
PDF file
ABAkkenzhe Bussurmanova
Akkenzhe Bussurmanova
AAAnar Akkenzheyeva
Anar Akkenzheyeva
UYUzilkhan Yensegenova
Uzilkhan Yensegenova
VHViktors Haritonovs
Viktors Haritonovs
GEGerda Eida
Gerda Eida
MJMartynas Jankauskas
Martynas Jankauskas
The accumulation of end-of-life tires and post-consumer polyolefin waste is a growing environmental burden, and their reuse as bitumen modifiers offers a sustainable, large-volume outlet in road construction. This study investigated paving-grade bitumen modified with four pre-compounded, partially devulcanized rubber (DVR)-recycled-polymer composites, differing in polymer type and, for two of the systems, in styrene–butadiene–styrene (SBS) chain architecture (linear or radial), added at 9–15 wt.%. The modified binders were characterized by penetration, softening point, elastic recovery, force ductility, low-temperature brittleness, and dynamic shear rheometry (DSR), together with FTIR, TGA, and fluorescence microscopy. All four composites improved binder stiffness, elasticity, and high-temperature rheology relative to the unmodified bitumen, with the two SBS-containing systems performing best overall. At the highest modifier content, the best-performing composite roughly halved the penetration and raised both the softening point and the higher critical temperature or rutting parameter by approximately 28–30 °C, while also markedly improving elastic recovery and low-temperature flexibility relative to the base bitumen. These findings indicate that SBS-containing devulcanized-rubber/recycled-polymer composites are promising sustainable modifiers for producing high-performance bituminous binders from waste-derived materials.

5 April 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
ABAina Bernava
Aina Bernava
SRS Reihmane
S Reihmane
Remo Merijs-MeriRemo Merijs-Meri
Remo Merijs-Meri
The application of nonwoven composites expands each year. The heat-bonded nonwovens (NW) are used for geotextile production due to the simple production cycle and low processing cost. To create the geotextile with desirable properties the mix of fibres are used. The aim of this study is to use recycled hemp, polyethylene terephthalate and polypropylene fibres for the development of new materials and technologies for nonwoven material composites (NWC) production. The series of NWC from mix of natural and synthetic fibres and series with one or two sides thermoplastic net reinforcing are manufactured. The NWC characterization parameters, water penetration, air permeability and results of physico-mechanical properties are presented.

5 February 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Remo Merijs-MeriRemo Merijs-Meri
Remo Merijs-Meri
JZJanis Zicans
Janis Zicans
TITatjana Ivanova
Tatjana Ivanova
JBJuris Bitenieks
Juris Bitenieks
PJPēteris Patriks Jefimovs
Pēteris Patriks Jefimovs
ULDIS ZAIMISULDIS ZAIMIS
ULDIS ZAIMIS
The current research demonstrates boundaries of waste red seaweed furcellaran (FUR) for development of thermoplastically processable thermoplastic starch (TPS) compositions. Three different FUR concentrations (10, 30 and 50 wt.%) in relation to potato starch replacement were examined for their thermoplastic processability. Thermogravimetric (TGA), differential scanning calorimetry (DSC), rheology and tensile mechanical tests were performed to assess performance of the developed TPS/FUR compositions. It was observed that the highest mechanical stress at break (almost 3 times higher than for neat TPS) is observed for TPS+50wt.% FUR composition, however, on the account of decreased deformability (only ca 10%), reduced thermal resistance at processing temperatures (150oC) as well as high shear sensitivity. Thus compositions TPS+30wt.% FUR and especially TPS+10wt.% FUR are more suitable for thermoplastic processing and development of TPS based composites with improved exploitation properties.