We propose using power-over-fiber (PoF) in some part of future 5G cellular solutions based on radio access networks considering currently installed front-haul solutions with single mode fiber to optically power communication systems for 5G new radio (NR) data transmission. Simulations addressing design parameters are presented. Radio-over-fiber (RoF) transmission over single mode fiber (SMF) is experimentally implemented and tested for link lengths ranging from 100 m up to 10 km with injected PoF signals up to 2 W. 64QAM, 16QAM and QPSK data traffic of 100 MHz bandwidth are transmitted simultaneously with the PoF signal showing an EVM compliant with 5G NR standard, and up to 0.5 W for 256QAM. EVM of 4.3% is achieved with RF signal of 20 GHz and QPSK modulation format in coexistence with delivering 870 mW of optical power to a photovoltaic cell (PV) after 10 km-long SMF link. Using PoF technology to optically powering remote units and Internet-of-Things (IoT) solutions based on RoF links is also discussed.
We propose the integration of power-over-fiber (PoF) in home networks with multi Gbit/s data transmission based on wavelength-division-multiplexing (WDM) in step-index plastic optical fibers (SI-POF). Different powering architectures are described. The efficiencies of different components are discussed to address the maximum remote energy that can be delivered. Experimental results show the ability of the system to deliver several mW of optical power with negligible data signal quality degradation and with BER of 1 10-10. The potential of utilizing PoF in combination with low-loss WDM-POF to optically powering multiple devices for specific in-home applications and IoT ecosystems is discussed. A PoF scalability analysis is detailed.
In this work, we investigate the feasibility of optical powering in coexistence with radio transmission using baseband signals with 5G New Radio (5G NR) numerology with different bandwidths (BW) on Analog Radio over Fiber (ARoF) systems with single mode fibers (SMF). We focus on the impact of chromatic dispersion (CD), non-linear effects, High Power Laser (HPL) instabilities and their interactions, performing simulations and experiments. First, without Power over Fiber (PoF), we verify that increasing the BW of the 5G-NR baseband signal reduces the CD-induced power fading at the critical RF frequency with the highest extinction and the error-vector magnitude (EVM) of the received 5G-NR signal worsens. The CD-induced power fading is 10 dB smaller for 100 MHz versus 10 MHz baseband signal BWs. Then, we experimentally demonstrate the influence of a PoF signal, generated by a Raman HPL, on the transmission of 5G-NR signals in a shared scenario with co-transmission of both PoF and data signals. The CD-induced power fading at the critical RF frequency with the highest extinction is 27 dB smaller for 5G-NR signal BWs of 10 MHz and 100 MHz respectively when the HPL is set to +33dBm. This PoF signal enhances the EVM of the received 5G-NR signal to values in compliance with the standard while providing an On/Off Raman gain of 12.7 dB at 1552.8 nm data signal in a 14.43 km SMF link. For a 5G-NR signal BW of 10 MHz and a RF carrier frequency of 17GHz, the EVM improves from 31.3% to 11.6% for a HPL power of +33 dBm. For shorter distances such as 100m, HPL noise transfer does not affect the EVM of data signal.
Different scenarios are reported to demonstrate the feasibility of Power over Fiber (PoF) integration with Analog Radio over Fiber (ARoF) systems in 5G C-RAN networks with optical fronthauling. PoF extension to 6G networks is discussed.