Nuha Elamin

Dr. Nuha Elamin

Imam mohammed ibn saud islamic university, Riyadh, Ar Riyāḑ, Saudi Arabia
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2022 in Inorganics
Verified
Journal Article
Open access
PDF file
AMAbueliz Modwi
Abueliz Modwi
MAMohamed R Abuzaid
Mohamed R Abuzaid
HIHajo Idriss
Hajo Idriss
NENuha Elamin
Nuha Elamin
FAFatima A. Adam
Fatima A. Adam
BABabiker Abdulkhair
Babiker Abdulkhair
This report investigates the elimination of hazardous Rhodamine B dye (RhB) from an aqueous medium utilizing MgTiO3@g-C3N4 nanohybrids manufactured using a facile method. The nanohybrid MgTiO3@g-C3N4 was generated using an ultrasonic approach in the alcoholic solvent. Various techniques, including HRTEM, EDX, XRD, BET, and FTIR, were employed to describe the fabricated MgTiO3@g-C3N4 nanohybrids. RhB elimination was investigated utilizing batch mode studies, and the maximum removal was attained at pH 7.0. The RhB adsorption process is more consistent with the Langmuir isotherm model. The highest adsorption capacity of MgTiO3@g-C3N4 nanohybrids for RhB was determined to be 232 mg/g. The dye adsorption followed a pseudo-second-order model, and the parameters calculated indicated that the kinetic adsorption process was spontaneous. Using ethanol and water, the reusability of the nanomaterial was investigated, and based on the results; it can be concluded that the MgTiO3@g-C3N4 nanohybrids are easily regenerated for dye removal. The removal mechanism for the removal of RhB dye into MgTiO3@g-C3N4 nanohybrids was also investigated.

28 December 2021 in ACS Omega
Verified
Journal Article
Open access
AAAhmed Shahat Ahmed Abady
Ahmed Shahat Ahmed Abady
NENuha Elamin
Nuha Elamin
WFWesam Abd El Fatah
Wesam Abd El Fatah
Chemical sensors based on mesoporous silica nanotubes (MSNTs) for the quick detection of Fe(III) ions have been developed. The nanotubes’ surface was chemically modified with phenolic groups by reaction of the silanol from the silica nanotubes surface with 3-aminopropyltriethoxysilane followed by reaction with 3-formylsalicylic acid (3-fsa) or 5-formylsalicylic acid (5-fsa) to produce the novel nanosensors. The color of the resultant 3-fsa-MSNT and 5-fsa-MSNT sensors changes once meeting a very low concentration of Fe(III) ions. Color changes can be seen by the naked eye and tracked with a smartphone or fluorometric or spectrophotometric techniques. Many experimental studies have been conducted to find out the optimum conditions for colorimetric and fluorometric determining of the Fe(III) ions by the two novel sensors. The response time, for the two sensors, that is necessary to achieve a steady spectroscopic signal was less than 15 s. The suggested methods were validated in terms of the lowest limit of detection (LOD), the lowest limit of quantification (LOQ), linearity, and precision according to International Conference on Harmonization (ICH) guidelines. The lowest limit of detection that was obtained from the spectrophotometric technique was 18 ppb for Fe(III) ions. In addition, the results showed that the two sensors can be used eight times after recycling using 0.1 M EDTA as eluent with high efficiency (90%). As a result, the two sensors were successfully used to determine Fe(III) in a variety of real samples (tap water, river water, seawater, and pharmaceutical samples) with great sensitivity and selectivity.

19 May 2022 in Inorganics
Verified
Journal Article
Open access
PDF file
MAMohamed R Abuzaid
Mohamed R Abuzaid
KIKhalid Ibnaouf
Khalid Ibnaouf
NENuha Elamin
Nuha Elamin
FAFatima A. Adam
Fatima A. Adam
AAAbdulrahman H. Alolayan
Abdulrahman H. Alolayan
BABabiker Abdulkhair
Babiker Abdulkhair
Bismuth oxyiodide (BiOI) is a targeted material for its relative safety and photocatalytic activity under visible light. In this study, a successful simple and energy-saving route was applied to prepare BiOI through a sonochemical process at room temperature. The characterization of the prepared BiOI was conducted by physical means. The transmission electron microscope (TEM) image showed that the BiOI comprises nanoparticles of about 20 nm. Also, the surface area of the BiOI was found to be 34.03 m2 g−1 with an energy gap of 1.835 eV. The adsorption and photocatalytic capacities of the BiOI were examined for the indigo carmine dye (IC) as a model water-pollutant via the batch experiment methodology. The solution parameters were optimized, including pH, contact time, IC concentration, and temperature. Worth mentioning that an adsorption capacity of 185 mg·g−1 was obtained from 100 mg L−1 IC solution at 25 °C within 60 min as an equilibrium time. In addition, the BiOI showed a high degradation efficiency towards IC under tungsten lamb (80 W), where 93% was removed within 180 min, and the complete degradation was accomplished in 240 min. The fabricated BiOI nanoparticles completely mineralized the IC under artificial visible light, as indicated by the total organic carbon analysis.

27 June 2019 in Zeitschrift für Naturforschung A
Verified
Journal Article
Closed access
PDF file
BABabiker Abdulkhair
Babiker Abdulkhair
MSMutaz E. Salih
Mutaz E. Salih
NENuha Elamin
Nuha Elamin
AFA. Ma. Fatima
A. Ma. Fatima
AMAbueliz Modwi
Abueliz Modwi
Strenuous efforts have been employed to prepare zinc oxide (ZnO) with eco-friendly methods; however, few studies have reported the fabrication of ZnO using a sustainable procedure. In this study, spherical ZnO nanoparticles were successfully fabricated for photocatalysis applications using a simple and eco-friendly method using an arabinose sugar solution. The ZnO nanoparticles with a wurtzite structure were obtained by combining zinc nitrate and arabinose in water, followed by heating, evaporation, and calcinations at different annealing temperatures. The annealed ZnO photocatalysts were characterised via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The findings revealed a hexagonal wurtzite structure and good crystallinity with crystallite size increasing from 18 to 31 nm by means of an increase in the annealing temperature. The photocatalytic performance was examined to determine the degradation of mix dye waste. The spherical ZnO nanoparticles showed mix pollutant degradation of 84 % in 25 min at 400 °C.

25 December 2022 in Molecules
Verified
Journal Article
Open access
PDF file
MAMohamed R Abuzaid
Mohamed R Abuzaid
BABabiker Abdulkhair
Babiker Abdulkhair
NENuha Elamin
Nuha Elamin
KIKhalid Ibnaouf
Khalid Ibnaouf
HIHajo Idriss
Hajo Idriss
AMAbueliz Modwi
Abueliz Modwi
In this study, a V@TiO2 nanocomposite is examined for its ability to eliminate carcinogenic Rhodamine (Rh-B) dye from an aqueous medium. A simple ultrasonic method was used to produce the nanosorbent. In addition, V@TiO2 was characterized using various techniques, including XRD, HRTEM, XPS, and FTIR. Batch mode studies were used to study the removal of Rh-B dye. In the presence of pH 9, the V@TiO2 nanocomposite was able to remove Rh-B dye to its maximum extent. A correlation regression of 0.95 indicated that the Langmuir model was a better fit for dye adsorption. Moreover, the maximum adsorption capacity of the V@TiO2 nanocomposite was determined to be 158.8 mg/g. According to the thermodynamic parameters, dye adsorption followed a pseudo-first-order model. Based on the results of the study, a V@TiO2 nanocomposite can be reused for dye removal using ethanol.

1 April 2022 in Inorganics
Verified
Journal Article
Open access
PDF file
HFHela Ferjani
Hela Ferjani
YSYoussef Ben Smida
Youssef Ben Smida
DODamian Onwudiwe
Damian Onwudiwe
NENuha Elamin
Nuha Elamin
SESafa Ezzine
Safa Ezzine
NANorah S. Almotlaq
Norah S. Almotlaq
This study explores the electronic properties of (C2H7N4O)2BiCl5 using the density functional theory (DFT) method, which was compared with the experimental data. The band structure of the compound indicated that it is a direct semiconductor with a band gap energy of 3.54 eV, which was comparable with the value (3.20 eV) obtained experimentally from the UV–vis spectroscopy. The density of state study showed that the conduction band was formed mainly by Bi 6p, C 2p, and N 2p states, while the valence band was formed mainly by Cl 2p, O 2p, and N 2p states. Hirshfeld surface analysis and enrichment ratio (E) were further used to investigate and quantify the intermolecular interactions within the compound. These studies established that the most important role in the stability of the structure of this crystalline material was provided by hydrogen bonding and π–π stacking interactions. The crystalline morphology of the compound was determined using BFDH simulation, based on the single-crystal structure result. Furthermore, Fourier transform infrared spectroscopy (FTIR) was used to study the vibrational modes of carbamoyl-ganidinium cations. The charge transfer process within the anionic chains of [BiCl5]∝, studied using photoluminescence spectroscopy, resulted in a broad emission band with two positions of maxima centered at 336 and 358 nm. This work offers a good understanding of the optical, structural, as well as the electrical properties of (C2H7N4O)2BiCl5, which are necessary in its applications in areas such as multifunctional magnetic, optoelectronic, and photonic systems.