This study presents a comprehensive analysis of contaminant transport in estuarine environments, focusing on the impact of tidal creeks and flats. The research employs advanced hydrodynamic models with irregular grid systems and conducts a detailed residual current analysis to explore how these physical features influence the movement and dispersion of contaminants. The methodology involves simulating residual currents and Lagrangian particle trajectories in both ‘Creek’ and ‘No Creek’ cases, under varying tidal conditions. The results indicate that tidal creeks significantly affect particle retention and transport, with notable differences observed in the dispersion patterns between the two scenarios. The ‘Creek’ case demonstrates enhanced material retention along the creek pathways, while the ‘No Creek’ case shows broader dispersion, potentially leading to increased sedimentation in open sea areas. The discussion highlights the implications of these findings for sediment dynamics, contaminant transport, and estuarine ecology, emphasizing the role of tidal creeks in modulating flow and material transport. The research underlines the necessity of incorporating detailed environmental features in estuarine models for accurate contaminant transport prediction and effective estuarine management. This study contributes to a deeper understanding of estuarine hydrodynamics and offers valuable insights for environmental policy and management in coastal regions.

This study investigated the flow patterns and affecting factors in the North Port of Incheon, South Korea, to understand the inner-port circulation characteristics by applying an unstructured grid finite volume community ocean model (FVCOM) together with a field survey. The FVCOM considered the tide, river discharge, surface winds, and atmospheric pressure with the highest resolution of 50 m around the port. The model results were validated with current velocity and salinity observations. In the main channel, the difference in salinity between the sea surface and bottom increased during the neap tide due to weakened tidal currents, thus strengthening the stratification. However, at the inner port, strong stratification was observed during spring tide as the near-surface freshwater from upstream of the estuary moved relatively farther south of the port than that during the neap tide. Freshwater flowed into the port during the flood current and was trapped in the semi-closed geometry of the inner port. The horizontal salinity gradient between the trapped fresher water in the port and saltier water in the main channel increased during the flood current. As a result, density-driven circulations associated with near-bed currents towards the port were maintained for more than 3 h after high tide. This result implies that the baroclinic effect, mainly due to the salinity gradient in the North Port, could significantly affect residual circulation at the inner harbor in a macro-tidal environment and the mass transport mechanism, such as sediment transport. In general, such enhanced baroclinic effects due to salinity and tides are not limited to the North Port and can have greater effects on inner-port circulation in other macro-tidal harbors that suffer from severe sedimentation problems.

This study proposes improving the process of the vertical diffusion of temperature in numerical models to enhance the accuracy of sea surface temperature (SST) simulation. SST tends to be underestimated in the coastal and tidal flat regions, such as the Yellow Sea around Korea. In particular, SST in coastal areas is highly sensitive to wet/dry treatment, implying that the sensitivity of SST increases with the slope of coastal bathymetry. Therefore, during the calculation of vertical temperature diffusion terms, the numerical model’s surface boundary condition (SBC) was modified to limit excessive temperature differences below a certain depth in the coastal regions. Under wet or dry conditions defined by the wet/dry treatment, SBC and bottom boundary condition (BBC) adjustments are stabilized within a predefined depth limit. While horizontal diffusion also plays a role in the model, SST is significantly influenced by the balance of heat advection and shortwave radiation. To demonstrate this, Heat Limit Depth (HLD) was added as an input parameter into the vertical diffusion algorithm in the model to enhance sensitivity to the SBC. If the total water depth in the tidal flat is below the HLD and less than 1.0 m, the model is changed to estimate surface sediment temperature instead of SST. The improvement in the vertical diffusion term for SST was effective primarily in tidal flat areas. In contrast, the impact was less pronounced in coastal areas with average depths exceeding 5 m. The rationale for separating SBC and BBC in the improved air–sea interaction process is twofold: SBC adjustments are suitable for reducing heat flux effects, specifically in shallow depths or tidal flats, without significantly affecting the entire model domain, while combined SBC and BBC adjustments are more appropriate for inducing coastal SST changes across the domain.