Slope failures in open-pit mining pose significant operational and safety issues, underscoring the importance of implementing effective stability monitoring frameworks for early hazard detection to allow for timely intervention and risk mitigation. This systematic review presents a comprehensive synthesis of existing and emerging methods and technologies used for slope stability monitoring in open-pit mining, including both remote sensing and in situ methods, as well as advanced technologies, such as Artificial Intelligence (AI), the Internet of Things (IoT), and Wireless Sensor Networks (WSNs). Using the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) 2020 guidelines, a total of 49 studies were selected from a collection of four engineering databases, and a comparative analysis was conducted to determine the underlying differences between the various methods for open-pit slope stability monitoring in terms of their performance across key attributes, such as monitoring accuracy, spatial and temporal coverage, operational complexity, and economic viability. Their juxtaposition highlighted the notion that no universally optimal slope stability monitoring system exists, due to a series of compromises that arise as a result of inherent technological limitations and site-specific constraints. Notably, remote sensing methods offer large-scale, non-intrusive monitoring, but are often limited by environmental factors and data acquisition infrequency, whereas in situ methods provide high precision, but suffer from limited spatial coverage and scalability. This review further highlights the capacity of emerging methods and technologies to address these limitations, providing suggestions for future research directions involving the integration of multiple sensing technologies for the enhancement of monitoring capabilities. This study provides a consolidated knowledge base on open-pit slope stability monitoring methods, technologies, and techniques, to guide the development of integrated, cost-effective, and scalable slope monitoring solutions that enhance mine safety and efficiency.

Inertial measurement units are commonly used to estimate the orientation of sections of sections of human body in inertial navigation systems. Most of the algorithms used for orientation estimation are computationally expensive and it is difficult to implement them in real-time embedded systems with restricted capabilities. This paper discusses a computationally inexpensive orientation estimation algorithm (Gyro Integration-Based Orientation Filter—GIOF) that is used to estimate the forward and backward swing angle of the thigh (thigh angle) for a vision impaired navigation aid. The algorithm fuses the accelerometer and gyroscope readings to derive the single dimension orientation in such a way that the orientation is corrected using the accelerometer reading when it reads gravity only or otherwise integrate the gyro reading to estimate the orientation. This strategy was used to reduce the drift caused by the gyro integration. The thigh angle estimated by GIOF was compared against the Vicon Optical Motion Capture System and reported a mean correlation of 99.58% for 374 walking trials with a standard deviation of 0.34%. The Root Mean Square Error (RMSE) of the thigh angle estimated by GIOF compared with Vicon measurement was 1.8477°. The computation time on an 8-bit microcontroller running at 8 MHz for GIOF is about a half of that of Complementary Filter implementation. Although GIOF was only implemented and tested for estimating pitch of the IMU, it can be easily extended into 2D to estimate both pitch and roll.

Route planning is key support, which can be provided by navigation tools for the blind and visually impaired (BVI) persons. No comprehensive analysis has been reported in the literature on this top...

Background: Cerebral palsy (CP) is a physical disability that affects movement and posture. Approximately 17 million people worldwide and 34,000 people in Australia are living with CP. In clinical and kinematic research, goniometers and inclinometers are the most commonly used clinical tools to measure joint angles and positions in children with CP. Objective: This paper presents collaborative research between the School of Electrical Engineering, Computing and Mathematical Sciences at Curtin University and a team of clinicians in a multicenter randomized controlled trial involving children with CP. This study aims to develop a digital solution for mass data collection using inertial measurement units (IMUs) and the application of machine learning (ML) to classify the movement features associated with CP to determine the effectiveness of therapy. The results were calculated without the need to measure Euler, quaternion, and joint measurement calculation, reducing the time required to classify the data. Methods: Custom IMUs were developed to record the usual wrist movements of participants in 2 age groups. The first age group consisted of participants approaching 3 years of age, and the second age group consisted of participants approaching 15 years of age. Both groups consisted of participants with and without CP. The IMU data were used to calculate the joint angle of the wrist movement and determine the range of motion. A total of 9 different ML algorithms were used to classify the movement features associated with CP. This classification can also confirm if the current treatment (in this case, the use of wrist extension) is effective. Results: Upon completion of the project, the wrist joint angle was successfully calculated and validated against Vicon motion capture. In addition, the CP movement was classified as a feature using ML on raw IMU data. The Random Forrest algorithm achieved the highest accuracy of 87.75% for the age range approaching 15 years, and C4.5 decision tree achieved the highest accuracy of 89.39% for the age range approaching 3 years. Conclusions: Anecdotal feedback from Minimising Impairment Trial researchers was positive about the potential for IMUs to contribute accurate data about active range of motion, especially in children, for whom goniometric methods are challenging. There may also be potential to use IMUs for continued monitoring of hand movements throughout the day. Trial Registration: Australian New Zealand Clinical Trials Registry (ANZCTR) ACTRN12614001276640, https://www.anzctr.org.au/Trial/Registration/TrialReview.aspx?id=367398; ANZCTR ACTRN12614001275651, https://www.anzctr.org.au/Trial/Registration/TrialReview.aspx?id=367422