Rechargeable lithium-ion batteries (LIB) play a key role in the energy transition towards clean energy, powering electric vehicles, storing energy on renewable grids, and helping to cut emissions from transportation and energy sectors. Lithium (Li) demand is estimated to increase considerably in the near future, due to the growing need for clean-energy technologies. The corollary is that consumer expectations will also grow in terms of guarantees on the origin of Li and the efforts made to reduce the environmental and social impact potentially associated with its extraction. Today, the LIB-industry supply chain is very complex, making it difficult for end users to ensure that Li comes from environmentally and responsible sources. Using an innovative geochemical approach based on the analysis of Li isotopes of raw and processed materials, we show that Li isotope ‘fingerprints’ are a useful tool for determining the origin of lithium in LIB. This sets the stage for a new method ensuring the certification of Li in LIB.
A (NiMnCo)-Metal-Organic Framework and its oxidized and pyrolysed derivatives have been tested as electrode materials for lithium-ion batteries. Materials have been fully characterized by Scanning Electron Microscopy (SEM), powder X-Ray Diffraction (XRD), Thermogravimetric Analyses (TGA), Infrared (IR) spectroscopy and electrochemical properties have been determined in coin cells using lithium metal as the counter electrode. Studies have revealed specific capacities of 860 mAh g−1 and 800 mAh g−1 at 15 mA g−1 respectively for the MOF and the oxide (690 and 190 mAh g−1 after 50 cycles) whereas the corresponding pyrolysed compound has shown limited electrochemical performances. Ex situ XRD has been performed to highlight the evolution of the material structure during cycling. These results show that electrochemical storage is based on a conversion reaction.
Lithium-rich disordered rocksalt Li2TiS3 offers large discharge capacities (>350 mAh·g−1) and can be considered a promising cathode material for high-energy lithium-ion battery applications. However, the quick fading of the specific capacity results in a poor cycle life of the system, especially when liquid electrolyte-based batteries are used. Our efforts to solve the cycling stability problem resulted in the discovery of new high-energy selenium-substituted materials (Li2TiSexS3−x), which were prepared using a wet mechanochemistry process. X-ray diffraction analysis confirmed that all compositions were obtained in cation-disordered rocksalt phase and that the lattice parameters were expanded by selenium substitution. Substituted materials delivered large reversible capacities, with smaller average potentials, and their cycling stability was superior compared to Li2TiS3 upon cycling at a rate of C/10 between 3.0–1.6 V vs. Li+/Li.
3 April 2025 in ACS Sustainable Chemistry & Engineering