Kevin Koshy Thomas

Mr. Kevin Koshy Thomas

Materials Science and Engineering Program, American University of Sharjah, Sharjah city, United Arab Emirates
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Kevin Koshy ThomasKevin Koshy Thomas
Kevin Koshy Thomas
Mahnoor Mir ZafarMahnoor Mir Zafar
Mahnoor Mir Zafar
WPWilliam G. Pitt
William G. Pitt
GHGhaleb Adnan Husseini
Ghaleb Adnan Husseini
Biomedical devices made from high-modulus and hardness materials play a critical role in enhancing the quality of life for people with bone-related ailments. While these materials have been successfully used in orthopedic applications, concerns including stress-shielding have necessitated the exploration of alternative solutions. An ideal biomedical implant requires a delicate balance of mechanical performance, corrosion resistance, tissue biocompatibility, and other properties such as tribological performance and osseointegration. This review explores the suitability of biodegradable magnesium (Mg) alloys as a promising material for biomedical implants. It delves into the essential properties of biomedical implants, emphasizing the importance of matching mechanical characteristics with human bone properties to mitigate stress shielding. The corrosion properties of implant materials are discussed, highlighting the need for controlled degradation to ensure the safety and longevity of implants. The focus then shifts to the potential of magnesium alloys as biomedical implants, examining their benefits, limitations, and the challenges associated with their high degradation rates and less-than-satisfactory mechanical properties. Alloying with elements such as aluminum, zinc, and others is explored to improve magnesium alloys’ mechanical performance and corrosion resistance. Furthermore, this review discusses surface modification techniques, including chemical conversion coatings and biomimetic deposition, as effective strategies to enhance the corrosion resistance and biocompatibility of magnesium and its alloys. These modifications offer opportunities to improve the long-term performance of magnesium-based biomedical implants. This review provides a comprehensive overview of the properties, challenges, and potential solutions associated with biodegradable magnesium alloys as a promising material for biomedical implants. It underscores the importance of addressing problems related to mechanical performance, corrosion resistance, and biocompatibility to advance the development of safe and effective biomedical implant materials.

24 October 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
Kevin Koshy ThomasKevin Koshy Thomas
Kevin Koshy Thomas
Mahnoor Mir ZafarMahnoor Mir Zafar
Mahnoor Mir Zafar
WPWilliam G. Pitt
William G. Pitt
GHGhaleb Adnan Husseini
Ghaleb Adnan Husseini
Biomedical devices made from high-modulus and hardness materials play a critical role in enhancing the quality of life for individuals with bone-related ailments. While these materials have been successfully used in orthopedic applications, concerns including stress-shielding have necessitated the exploration of alternative solutions. An ideal biomedical implant requires a delicate balance of mechanical performance, corrosion resistance, tissue biocompatibility, and other properties such as tribological performance and osseointegration. This review explores the suitability of biodegradable magnesium (Mg) alloys as a promising material for biomedical implants. It delves into the essential properties of biomedical implants, emphasizing the importance of matching mechanical characteristics with human bone properties to mitigate stress shielding. The corrosion properties of implant materials are discussed, highlighting the need for controlled degradation to ensure the safety and longevity of implants. The focus then shifts to the potential of magnesium alloys as biomedical implants, examining their benefits, limitations, and the challenges associated with their high degradation rates and less-than-satisfactory mechanical properties. Alloying with elements such as aluminum, zinc, and others is explored to improve magnesium alloys' mechanical performance and corrosion resistance. Furthermore, this review discusses surface modification techniques, including chemical conversion coatings and biomimetic deposition, as effective strategies to enhance the corrosion resistance and biocompatibility of magnesium and its alloys. These modifications offer opportunities to improve the long-term performance of magnesium-based biomedical implants. This paper provides a comprehensive overview of the properties, challenges, and potential solutions associated with biodegradable magnesium alloys as a promising material for biomedical implants. It underscores the importance of addressing issues related to mechanical performance, corrosion resistance, and biocompatibility to advance the development of safe and effective biomedical implant materials.

23 October 2020 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
SKSathish Kannan
Sathish Kannan
HKHossam Kishawy
Hossam Kishawy
Salman PervaizSalman Pervaiz
Salman Pervaiz
Kevin Koshy ThomasKevin Koshy Thomas
Kevin Koshy Thomas
KRKarthikeyan Ram
Karthikeyan Ram
RARamanathan Arunachalam
Ramanathan Arunachalam
Machining of novel light weight 7075 aluminum alloy reinforced with thin-walled hollow ceramic bubbles present a significant challenge to the manufacturing industry. The presence of hollow bubble phase causes poor surface finish and high machining cost. In this paper, an effort has been made to elucidate the mechanics of machining new grade AA7075 syntactic foams through an analytical force model which is the first of its kind for this material. Orthogonal cutting experiments carried out on different volume fraction and bubble size syntactic foams showed an increase in machining forces by up to 500 N with increasing feed (0.02 mm to 0.2 mm) and 200 N with decreasing cutting speed (100 m/min to 25 m/min). The hollow bubble size profoundly influences the plastic deformation behavior of the matrix. Decrease in average ceramic bubble size (0.6 mm to 0.3 mm) causes the machining forces to increase by margin of 65%. It is found that smaller the hollow bubble size and higher its volume fraction, higher will be the magnitude of machining forces. The causes of variation in machining forces is primary attributed to the characteristic bubble burst modes (Mode 1 and Mode 2) that alters the effective load transfer mechanism with 7075 matrix and its plasticity.

10 January 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
Kevin Koshy ThomasKevin Koshy Thomas
Kevin Koshy Thomas
SKSathish Kannan
Sathish Kannan
Salman PervaizSalman Pervaiz
Salman Pervaiz
MNMohammad Nazzal
Mohammad Nazzal
KRKarthikeyan Ram
Karthikeyan Ram
The addition of hollow aluminium oxide bubbles to the 7075 aluminium matrix results in a lightweight syntactic foam with a reduced density and an increased peak compression strength. The presence of ceramic bubbles also aids in a reduced coefficient of thermal expansion and thermal conductivity in comparison to aluminium alloys. In spite of their enhanced material properties, the inclusion of hollow aluminium oxide bubbles presents the challenge of poor machinability. In order to elucidate the problem of poor surface machinability, an attempt has been made to develop a thermo-mechanical finite element machining model using AdvantEdgeTM software with which surface quality and machined syntactic foam material can be analyzed. If the novel model developed is combined with virtual reality technology, CNC technicians can observe the machining results to evaluate and optimize the machining program. The main novelty behind this software is that the material foam is assumed as a homogeneous material model for simplifying the material model as a complex heterogeneous material system. The input parameters used in this study are cutting speed, feed, average size and volume fraction of hollow aluminium oxide bubbles, and coolant. For the output parameters, the numerical analysis showed a 6.24% increase in peak tensile machining induced stress as well as a 51.49% increase in peak cutting temperature as cutting speed (25 m/min to 100 m/min) and uncut chip thickness (0.07 mm to 0.2 mm) were increased. The average size and volume fraction of hollow aluminium oxide bubbles showed a significant impact on the magnitude of cutting forces and the depth of tensile induced stress distribution. It was observed on the machined surface that, as the average size of hollow aluminium oxide bubbles became coarser, the peak machining induced tensile stress on the cut surface reduced by 4.47%. It was also noted that an increase in the volume fraction of hollow aluminium oxide bubbles led to an increase in both the peak machining induced tensile stress and the peak cutting temperature by 29.36% and 20.11%, respectively. This study also showed the influence of the ceramic hollow bubbles on plastic deformation behavior in 7075 aluminium matrix; the machining conditions for obtaining a favorable stress distribution in the machined surface and sub-surface of 7075 closed cell syntactic foam are also presented.

30 March 2022 in Metals
Verified
Journal Article
Open access
PDF file
Kevin Koshy ThomasKevin Koshy Thomas
Kevin Koshy Thomas
SKSathish Kannan
Sathish Kannan
MNMohammad Nazzal
Mohammad Nazzal
Salman PervaizSalman Pervaiz
Salman Pervaiz
KRKarthikeyan Ram
Karthikeyan Ram
Aluminum closed cell syntactic foams possess reduced density, higher peak compression strength, and lower coefficient of thermal expansion and thermal conductivity compared to metal alloys. However, the industrial mass production of these complex material systems presents a significant problem in the form of poor machinability. In order to address this concern and to increase the use of this potential cost- and energy-saving system, a two-dimensional numerical model using the AdvantEdgeTM machining software was developed. For the verification of the numerical model, machining trials in dry conditions were conducted on different samples using a SandvikTM carbide-coated insert having a 6° rake angle and a 7° clearance angle. The hollow alumina shell diameter and volume fraction were found to profoundly affect the magnitude of the generated machining forces. This study showed an increase in machining force by almost 25% for syntactic foams reinforced with hollow alumina shells of higher volume fraction and coarser diameters. The cutting conditions to obtain a favorable stress diastribution in the syntactic foam’s machined sub-surface were identified.

26 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
AMAbdalla Nassir Mohammed
Abdalla Nassir Mohammed
SKSathish Kannan
Sathish Kannan
Salman PervaizSalman Pervaiz
Salman Pervaiz
SAShafahat Ali Ali
Shafahat Ali Ali
Kevin Koshy ThomasKevin Koshy Thomas
Kevin Koshy Thomas
KRKarthikeyan Ram
Karthikeyan Ram
In this study, the drilling performance of biodegradable grade Mg-9Al-1.4Zn alloy reinforced with hollow thin-walled Al2O3 microspheres is inspected under different coolant environments such as dry, Almag® mineral oil, and liquid nitrogen. Drilling experiments were carried out using titanium aluminum nitride PVD coated and uncoated K10 tools on varying volume fractions of magnesium syntactic foams (5%, 10%, and 15%) reinforced with hollow Al2O3 microspheres. Test results showed a 30–60% higher thrust force generated with liquid nitrogen drilling in comparison to dry and oil-based drilling while cutting higher volume fraction foams. Higher microsphere volume fractions of syntactic foam recorded higher machining forces, which is roughly a 200% increase as the volume fraction raised to 15%. The performance of TiAlN PVD tool coating is reflected through a reduction in thrust forces by 20% during cryogenic drilling. Scanning electron microscope (SEM) investigation of cryogenic-machined bore surfaces showed minimal drilling-induced surface defects compared to dry and Almag® mineral oil conditions. A three-dimensional, thermo-mechanical finite element-based model for drilling Mg-9Al-1.4Zn syntactic foam using AdvantEdgeTM is developed for different sustainable lubrication conditions. Surface finish (Ra) showed a 45–55% improvement during cryogenic drilling of 15% syntactic foams with minimized subsurface damages compared to dry and wet cutting conditions. The higher the volume fraction, the higher the surface roughness (Ra) and thrust force under cryogenic machining.