For the safety of prestressed structures, prestress loss is a critical issue that will increase with structural damage, so it is necessary to investigate prestress loss of prestressed structures under different damage scenarios. Unfortunately, to date, no qualified techniques are available due to difficulty for sensors to survive in harsh construction environments of long service life and large span. In this paper, a novel smart steel strand based on the Brillouin optical time domain analysis (BOTDA) sensing technique was designed and manufactured, and then series of tests were used to characterize properties of the smart steel strands. Based on prestress loss principle analysis of damaged structures, laboratory tests of two similar beams with different damages were used to verify the concept of full-scale prestress loss monitoring of damaged reinforced concrete (RC) beams by using the smart steel strands. The prestress losses obtained from the Brillouin sensors are compared with that from conventional sensors, which provided the evolution law of prestress losses of damaged RC beams. The monitoring results from the proposed smart strand can reveal both spatial distribution and time history of prestress losses of damaged RC beams.
As the distribution function of traffic load effect on bridge structures has always been unknown or very complicated, a probability model of extreme traffic load effect during service periods has not yet been perfectly predicted by the traditional extreme value theory. Here, we focus on this problem and introduce a novel method based on the bridge structural health monitoring data. The method was based on the fact that the tails of the probability distribution governed the behavior of extreme values. The generalized Pareto distribution was applied to model the tail distribution of traffic load effect using the peak-over-threshold method, while the filtered Poisson process was used to model the traffic load effect stochastic process. The parameters of the extreme value distribution of traffic load effect during a service period could be determined by theoretical derivation if the parameters of tail distribution were estimated. Moreover, Bayes’ theorem was applied to update the distribution model to reduce the statistical uncertainty. Finally, the rationality of the proposed method was applied to analyze the monitoring data of concrete-filled steel tube arch bridge suspenders. The results proved that the approach was convenient and found that the extreme value distribution type III might be more suitable as the traffic load effect probability model.
1 January 2021 in Latin American Journal of Solids and Structures
A self-aware posttensioned prestressing intelligent reinforcement system with force and sensors is proposed by combining the advantages of posttensioned prestressing reinforcement technology and intelligent structure. A static test study is then conducted with brick masonry members (wall pieces) as reinforcement objects. The experimental results demonstrate that the intelligent strand can be deployed using the same process, tensioning apparatus, and anchoring equipment as ordinary strand. Furthermore, the mechanical performance indexes with and without intelligent strands are very close, and the differences in percentages of cracking load, cracking displacement, yielding load, yielding displacement, ultimate load, and ultimate displacement are 20%, 9%, 9%, 10%, 2%, and 26%.
4 August 2017 in IOP Conference Series: Earth and Environmental Science
Prestress loss is critical to impact the safety of prestressed structures. Unfortunately, up to date, there are no qualified techniques to handle this issue due to the fact that it is too hard for sensors to survive the harsh construction environments and the time-dependent service life of the large-span prestressed structures. This paper proposes a novel technique to monitor prestress loss in prestressed beams using Brillouin optical fiber sensors. A novel smart steel strand based on the sensing technique of full-scale Brillouin optical fiber sensors was introduced. Two kinds of prestressed structure were used to verify the concept of monitoring prestress loss using smart steel strands. The prestress loss data have been taken by Brillouin optical fiber sensors. And the monitoring results agree well with those from the conventional sensors. The monitoring data can reveal both the full-scale distribution and the time history of prestress loss during the construction stage and also in-service phrase.