The combined release of artificial reefs in different quantities and arrangements leads to different flow field effects. This study designs a small trapezoidal artificial reef. To optimize the quantity and layout of these reefs, trapezoidal reefs in three different layouts were selected for analysis at five different velocity gradients (0.1, 0.5, 1.0, 1.5, and 2.0 m/s). The effects of disposal spacing and layout on the flow field effect of trapezoidal artificial reefs at different flow velocities were simulated using Ansys Fluent. According to the findings: after simulation, flow velocity could indirectly reflect the distribution of upwelling and back eddy, the scale and strength of upwelling increased as flow velocity increased, and the back eddy showed no obvious variation with flow velocity. In transverse combination mode, both the scale and strength of the upwelling and back eddy were maximized when the reef spacing was 1.0 L; in longitudinal combination mode, upwelling and back eddy reached maximum scale and strength when the disposal spacing of the reefs was 1.5 L of a single reef. In 2020, flow mapping and fishery surveys were carried out in the engineering pilot area. The results showed that the number and species of fish populations with 1.5 L spacing in the vertical combination method were significantly higher than those in other forms, and the structure of the fish reef was stable without any flipping or sliding phenomenon. This study can provide a theoretical reference for the design and the actual deployment of artificial reefs to improve the ecological restoration of the water.

This paper aimed to understand the nonlinear dynamic responses that arise from the interaction between waves and a biofouling aquaculture cage array. To that end, physical model tests of a biofouling aquaculture cage array in a 1 $\times$ 3 configuration in regular waves were conducted. Wave steepness values of 1/60, 1/30, and 1/15 were considered within the frequencies spanning from low- to high-frequency bands. Then, the nonlinear dynamic responses of the system were systematically decomposed into four successive orders of components. This approach allowed for a thorough assessment of the inherent nonlinearity within the biofouling system by analyzing each individual order. The results highlight that the first-order harmonic component was the predominant contributor influencing the nonlinear dynamic response, while the higher-order harmonic components remained crucial in their contribution to the overall nonlinear dynamic response of the system. In particular, the harmonics within the low-frequency regime exhibited significantly greater nonlinearity compared with those in the high-frequency regime. A notable decrease in the amplitude of the harmonic component could be identified in the low-frequency regime due to the damping from the biofouling. The comprehensive analysis of the nonlinear dynamics within the biofouling system provides insights into optimizing the performance of aquaculture systems.

The existing vacuum fish pump is too large and difficult to move, which is difficult to apply to small fishing vessels. However, the development of a small vacuum fish pump is not a single scaling of the existing vacuum fish pump but requires the support of relevant experiments and simulation theories. In this study, a vacuum fish pump suitable for small fishing vessels was developed. Firstly, a numerical model of the internal flow field during the vacuum fish pump’s working process was established using computational fluid dynamics (CFDs) and verified its effectiveness by physical experiments. It is found that the VOF model can well predict the variation of the volume fraction of the liquid phase in the whole calculation area with time during the suction or drainage process of the vacuum fish pump. Then, the internal flow field characteristics of the fish pump under different working conditions were simulated, and the rationality of the design of the fish pump was evaluated according to the numerical results. Finally, a separate physical experiment was carried out on grass carp, carp, crucian carp, silver carp, and bighead carp, respectively, and the capture efficiency and corresponding fish damage rate for different fish were analyzed. The experimental and numerical results show that the vacuum suction fish pump can achieve efficient and automatic suction and transport of live fish.

Human alterations, such as hydropower development, are intensive and have negative impacts on fish and ecological environment. However, fish habitat restoration projects based on geographical morphology have not yet been reported in the Yangtze River. To explore engineering measures used to restore fish habitat structure and function, a mesoscale fish habitat restoration project was designed and constructed, which included restructuring of habitat topography in the fluctuating area. Three-dimensional computational fluid dynamics (CFD) models were used to simulate and predict the project’s effect on the hydromorphology prior to construction, and an Acoustic Doppler current profiler (ADCP) was deployed to test and verify actual flow field improvement. Short-term effects on fish species sorting and their main ecological traits were examined. The results showed that vorticity and flow heterogeneity in the river reach increased, suggesting that the restoration projects created flow conditions favourable to indigenous fishes. Thus, pre-optimization using computer simulation is an essential and scientific procedure that could be used to increase the probability of river restoration success. The promotion of habitat diversity had strong effects on fish aggregation, especially for the rare and endemic fish species targeted. Fish abundance, catch biomass and species richness increased by 98.1%, 62.7% and 22.5%, respectively. There were significant differences (p < 0.05) in species number and catch abundance before and after the project. The number of rare and endemic fish species increased from four to nine species. Overall, this research provides evidence that the promotion of habitat hydraulic morphology heterogeneity accelerates the recovery of fish diversity and biomass.

River barriers constitute a key factor that is degrading river connectivity and represent a critical research focus in riverine ecosystem conservation. Management authorities and river restoration agencies globally have increasingly employed barrier removal or modification for connectivity restoration projects in recent years, practices that are widely discussed and empirically supported in academia. However, existing research predominantly focuses on large dams in primary rivers, overlooking the more severe fragmentation caused by low-head barriers within low-order streams. This study targets the Yanjing River (total length: 70 km), a third-order tributary of the Yangtze River basin, implementing culvert modification and complete removal measures, respectively, for two river barriers distributed within its terminal 9 km reach. Using differential analysis, principal component analysis (PCA), cluster analysis, Mantel tests, and structural equation modeling (SEM), we systematically examined the mechanisms by which connectivity restoration projects influences aquatic habitat and fish diversity, the evolution of reach heterogeneity, and intrinsic relationships between aquatic environmental factors and diversity metrics. Results indicate that (1) the post-restoration aquatic habitat significantly improved with marked increases in fish diversity metrics, where hydrochemical factors and species diversity exhibited the highest sensitivity to connectivity changes; (2) following restoration, the initially barrier-fragmented river segments (upstream, middle, downstream) exhibited significantly decreased differences in aquatic habitat and fish diversity, demonstrating progressive homogenization across reaches; (3) hydrological factors exerted stronger positive effects on fish diversity than hydrochemical factors did, particularly enhancing species diversity, with a significant positive synergistic effect observed between species diversity and functional diversity. These studies demonstrate that “culvert modification and barrier removal” represent effective project measures for promoting connectivity restoration in low-order streams and eliciting positive ecological effects, though they may reduce the spatial heterogeneity of short-reach rivers in the short term. It is noteworthy that connectivity restoration projects should prioritize the appropriate improvement of hydrological factors such as flow velocity, water depth, and water surface width.

As an important component of the global fishery economy, the crab breeding and processing industry faces the dual challenges of sustainable development and technological upgrading. This paper first systematically analyzes the regional distribution and core biological characteristics of major global economic crab species, laying a foundation for the targeted design of processing technologies and equipment. Secondly, based on advances in crab processing technology, the industry is categorized into two systems: live crab processing and dead crab processing. Live crab processing has formed a full-chain technological system of “fishing–temporary rearing–depuration–grading–packaging”. Dead crab processing focuses on high-value utilization: high-pressure processing enhances the quality of crab meat; liquid nitrogen quick-freezing combined with modified atmosphere packaging extends shelf life; and biological fermentation and enzymatic hydrolysis facilitate the green extraction of chitin from crab shells. In terms of intelligent equipment application, sensor technology enables full coverage of aquaculture water quality monitoring, precise classification during processing, and vitality monitoring during transportation. Automation technology reduces labor costs, while fuzzy logic algorithms ensure the process stability of crab meat products. The integration of the Internet of Things (IoT) and big data analytics, combined with blockchain technology, enables full-link traceability of the “breeding–processing–transportation” chain. In the future, cross-domain technological integration and multi-equipment collaboration will be the key to promoting the sustainable development of the industry. Additionally, with the support of big data and artificial intelligence, precision management of breeding, processing, logistics, and other links will realize a more efficient and environmentally friendly crab industry model.