Location information is one of the most vital information required to achieve intelligence and context-awareness for Internet of Things (IoT) applications such as driverless cars. However, related security and privacy threats are a major holdback. With increasing focus on the use Global Navigation Satellite Systems (GNSS) for autonomous navigation and related applications, it is important to provide robust navigation solutions. Radio frequency interference, either intentional or unintentional, has a direct impact on GNSS navigation performance related to observability and accuracy. In terms of security, spoofing is the major issue of concern. This paper focuses on multi-antenna GNSS and Inertial Navigation System (INS)-odometer integration to improve robustness, security and privacy of navigation solutions. Multi-antenna GNSS provides robustness against different interference sources and integration with INS provides continuous navigation solutions during short-term signal outages. Performance of the proposed architecture is evaluated using different user scenarios in the presence of spoofing and interference signals in real vehicular environments.
4 November 2016 in Journal of Global Positioning Systems
Multipath affects the shape of the correlation function and results in biased pseudorange measurements and erroneous navigation solutions. Antenna array processing, which uses signal spatial characteristics, is an effective method to mitigate various types of interference signals. However, the performance of most of the distortionless beamforming techniques degrades in multipath conditions due to the correlation between the desired Line of Sight (LOS) signal and multipath signals. This paper characterizes the performance of different beamforming techniques to mitigate multipath signals through the processing and analysis of simulated and actual data. The main novelty is the investigation of multipath mitigation performance of practically realizable antenna array-based GNSS receivers when the beamforming process is completely integrated into the tracking module after de-spreading. Beamforming techniques such as Delay And Sum (DAS) beamforming, Minimum Power Distortionless Response (MPDR) with and without spatial smoothing are considered. A novel multi-antenna simulator test-bed is developed to generate multipath signals for a multi-antenna platform. A software multi-antenna GPS receiver incorporating different beamforming techniques is then developed to generate pseudorange measurements and position solutions. Carrier-to-Noise ratio (C/N0), pseudorange errors and position solutions before and after beamforming are compared to show the effectiveness of different beamforming techniques to mitigate multipath. Results with simulated and actual GPS signals show improved performance using the MPDR beamformer with spatial smoothing. The utilization of spatial processing results in a pseudorange error reduction of up to 60 % and a position error reduction of up to 30 %.
Although antenna array-based Global Navigation Satellite System (GNSS) receivers can be used to mitigate both narrowband and wideband electronic interference sources, measurement distortions induced by array processing methods are not suitable for high precision applications. The measurement distortions have an adverse effect on the carrier phase ambiguity resolution, affecting the navigation solution. Depending on the array attitude information availability and calibration parameters, different spatial processing methods can be implemented although they distort carrier phase measurements in some cases. This paper provides a detailed investigation of the effect of different array processing techniques on array-based GNSS receiver measurements and navigation performance. The main novelty of the paper is to provide a thorough analysis of array-based GNSS receivers employing different beamforming techniques from tracking to navigation solution. Two beamforming techniques, namely Power Minimization (PM) and Minimum Power Distortionless Response (MPDR), are being investigated. In the tracking domain, the carrier Doppler, Phase Lock Indicator (PLI), and Carrier-to-Noise Ratio (C/N0) are analyzed. Pseudorange and carrier phase measurement distortions and carrier phase position performance are also evaluated. Performance analyses results from simulated GNSS signals and field tests are provided.