Over-exploitation of coal mines leads to surface subsidence, surface cracks, collapses, landslides, and other geological disasters. Taking a mining area in Nalintaohai Town, Ejin Horo Banner, Ordos City, Inner Mongolia Autonomous Region, as an example, Sentinel-1A data from January 2018 to October 2019 were used as the data source in this study. Based on the high interference coherence of the permanent scatterer (PS) over a long period of time, the problem of the manual selection of ground control points (GCPs) affecting the monitoring results during refinement and re-flattening is solved. A DInSAR-PS-Stacking method combining the PS three-threshold method (the coherence coefficient threshold, amplitude dispersion index threshold, and deformation velocity interval) is proposed as a means to select ground control points for refinement and re-flattening, as well as a means to obtain time-series deformation by weighted stacking processing. A SBAS-PS-InSAR method combining the PS three-threshold method to select PS points as GCPs for refinement and re-flattening is also proposed. The surface deformation results monitored by the DInSAR-PS-Stacking and SBAS-PS-InSAR methods are analyzed and verified. The results show that the subsidence location, range, distribution, and space–time subsidence law of surface deformation results obtained by DInSAR-PS-Stacking, SBAS-PS-InSAR, and GPS methods are basically the same. The deformation results obtained by these two InSAR methods have a good correlation with the GPS monitoring results, and the MAE and RMSE are within the acceptable range. The error showed that the edge of the subsidence basin was small and that the center was large. Both methods were found to be able to effectively monitor the coal mine, but there were also shortcomings. DInSAR-PS-Stacking has a strong ability to monitor the settlement center. SBAS-PS-InSAR performed well in monitoring slow and small deformations, but its monitoring of the settlement center was insufficient. Considering the advantages of these two InSAR methods, we proposed fusing the time-series deformation results obtained using these two InSAR methods to allow for more reliable deformation results and to carry out settlement analysis. The results showed that the automatic two-threshold (deformation threshold and average coherence threshold) fusion was effective for monitoring and analysis, and the deformation monitoring results are in good agreement with the actual situation. The deformation information obtained by the comparison, and fusion of multiple methods can allow for better monitoring and analysis of the mining area surface deformation, and can also provide a scientific reference for mining subsidence control and early disaster warning.

Pine wilt disease (PWD) is one of the most destructive forest diseases that has led to rapid wilting and mortality in susceptible host pine trees. Spatially explicit detection of pine wood nematode (PWN)-induced infestation is important for forest management, policy making, and practices. Previous studies have mapped forest disturbances in response to various forest diseases and/or insects over large areas using remote-sensing techniques, but these efforts were often constrained by the limited availability of ground truth information needed for the calibration and validation of moderate-resolution satellite algorithms in the process of linking plot-scale measurements to satellite data. In this study, we proposed a two-level up-sampling strategy by integrating unmanned aerial vehicle (UAV) surveys and high-resolution Radarsat-2 satellite imagery for expanding the number of training samples at the 30-m resampled Sentinel-1 resolution. Random forest algorithms were separately used in the prediction of the Radarsat-2 and Sentinel-1 infestation map induced by PWN. After data acquisition in Muping District during August and September 2021, we first verified the ability of a deep-learning-based object detection algorithm (i.e., YOLOv5 model) in the detection of infested trees from coregistered UAV-based RGB images (Average Precision (AP) of larger than 70% and R² of 0.94). A random forest algorithm trained using the up-sampling UAV infestation map reference and corresponding Radarsat-2 pixel values was then used to produce the Radarsat-2 infestation map, resulting in an overall accuracy of 72.57%. Another random forest algorithm trained using the Radarsat-2 infestation pixels with moderate and high severity (i.e., an infestation severity of larger than 0.25, where the value was empirically set based on a trade-off between classification accuracy and infection detectability) and corresponding Sentinel-1 pixel values was subsequently used to predict the Sentinel-1 infestation map, resulting in an overall accuracy of 87.63%, where the validation data are Radarsat-2 references rather than UAV references. The Sentinel-1 map was also validated by independent UAV surveys, with an overall accuracy of 76.30% and a Kappa coefficient of 0.45. We found that the expanded training samples by the integration of UAV and Radarsat-2 strengthened the medium-resolution Sentinel-1-based prediction model of PWD. This study demonstrates that the proposed method enables effective PWN infestation mapping over multiple scales.

Previous studies have shown that scattering mechanism ambiguity and negative power issues still exist in model-based polarization target decomposition algorithms, even though deorientation processing is implemented. One possible reason for this is that the dynamic range of the model itself is limited and cannot fully satisfy the mixed scenario. To address these problems, we propose a hybrid polarimetric target decomposition algorithm (GRH) with a generalized volume scattering model (GVSM) and a random particle cloud volume scattering model (RPCM). The adaptive volume scattering model used in GRH incorporates GVSM and RPCM to model the volume scattering model of the regions dominated by double-bounce scattering and the surface scattering, respectively, to expand the dynamic range of the model. In addition, GRH selects the volume scattering component between GVSM and RPCM adaptively according to the target dominant scattering mechanism of fully polarimetric synthetic aperture radar (PolSAR) data. The effectiveness of the proposed method was demonstrated using AirSAR dataset over San Francisco. Comparison studies were carried out to test the performance of GRH over several target decomposition algorithms. Experimental results show that the GRH outperforms the algorithms we tested in this study in decomposition accuracy and reduces the number of pixels with negative powers, demonstrating that the GRH can significantly avoid mechanism ambiguity and negative power issues.

Polarimetric target decomposition algorithms have played an important role in extracting the scattering characteristics of buildings, crops, and other fields. However, there is limited research on the scattering characteristics of grasslands and a lack of volume scattering models established for grasslands. To improve the accuracy of the polarimetric target decomposition algorithm applicable to grassland environments, this paper proposes an adaptive polarimetric target decomposition algorithm (APD) based on the anisotropy degree (A). The adaptive volume scattering model is used in APD to model volume scattering in forest and grassland regions separately by adjusting the value of A. When A > 1, the particle shape becomes a disk, and the grassland canopy is approximated as a cloud layer composed of randomly oriented disk particles; when A < 1, the particle shape is a needle, simulating the scattering mechanism of forests. APD is applied to an L-band AirSAR dataset from San Francisco, a C-band AirSAR dataset from Hunshandak grassland in Inner Mongolia Autonomous Region, and an X-band COSMO-SkyMed dataset from Xiwuqi grassland in Inner Mongolia Autonomous Region to verify the effectiveness of this method. Comparison studies are carried out to test the performance of APD over several target decomposition algorithms. The experimental results show that APD outperforms the algorithms tested in terms of this study in decomposition accuracy for grasslands and forests on different bands of data.

The study of the polarimetric target decomposition algorithm with physical scattering models has contributed to the development of the field of remote sensing because of its simple and clear physical meaning with a small computational effort. However, most of the volume scattering models in these algorithms are for forests or crops, and there is a lack of volume scattering models for grasslands. In order to improve the accuracy of the polarimetric target decomposition algorithm adapted to grassland data, in this paper, a novel volume scattering model is derived considering the characteristics of real grassland plant structure and combined with the backward scattering coefficients of grass, which is abstracted as a rotatable ellipsoid of variable shape. In the process of rotation, the possibility of rotation is considered in two dimensions, the tilt angle and canting angle; for particle shape, the anisotropy degree A is directly introduced as a parameter to describe and expand the applicability of the model at the same time. After obtaining the analytical solution of the parameters and using the principle of least negative power to determine the optimal solution of the model, the algorithm is validated by applying it to the C-band AirBorne dataset of Hunshandak grassland in Inner Mongolia and the X-band Cosmos-Skymed dataset of Xiwuqi grassland in Inner Mongolia. The performance of the algorithm with five polarimetric target decomposition algorithms is studied comparatively. The experimental results show that the algorithm proposed in this paper outperforms the other algorithms in terms of grassland decomposition accuracy on different bands of data.

With the gradual expansion of mining scale in open-pit coal mines, slope safety problems are increasingly diversified and complicated. In order to reduce the potential loss caused by slope sliding and reduce the major threat to the safety of life and property of residents in the mining area, this study selected two mining areas in Xinjiang as cases and focused on the relationship between phase noise and deformation. The study predicts the specific time point of slope sliding by analyzing the dynamic history correlation tangent angle between the two. Firstly, the time series data of the micro-variation monitoring radar are used to obtain the small deformation of the study area by differential InSAR (D-InSAR), and the phase noise is extracted from the radar echo in the sequence data. Then, the volume of the deformation body is calculated by analyzing the small deformation at each time point, and the standard deviation of the phase noise is calculated accordingly. Finally, the sliding time of the deformation body is predicted by combining the tangent angle of the ratio of the volume of the deformation body to the standard deviation of the phase noise. The results show that the maximum deformation rates of the deformation bodies in the studied mining areas reach 10.1 mm/h and 6.65 mm/h, respectively, and the maximum deformation volumes are 2,619,521.74 mm³ and 2,503,794.206 mm³, respectively. The predicted landslide time is earlier than the actual landslide time, which verifies the effectiveness of the proposed method. This prediction method can effectively identify the upcoming sliding events and the characteristics of the slope, provide more accurate and reliable prediction results for the slope monitoring staff, and significantly improve the efficiency of slope monitoring and early warning.