Detection of forest pest outbreaks can help in controlling outbreaks and provide accurate information for forest management decision-making. Although some needle injuries occur at the beginning of the attack, the appearance of the trees does not change significantly from the condition before the attack. These subtle changes cannot be observed with the naked eye, but usually manifest as small changes in leaf reflectance. Therefore, hyperspectral remote sensing can be used to detect the different stages of pest infection as it offers high-resolution reflectance. Accordingly, this study investigated the response of a larch forest to Jas’s Larch Inchworm (Erannis jacobsoni Djak) and performed the different infection stages detection and identification using ground hyperspectral data and data on the forest biochemical components (chlorophyll content, fresh weight moisture content and dry weight moisture content). A total of 80 sample trees were selected from the test area, covering the following three stages: before attack, early-stage infection and middle- to late-stage infection. Combined with the Findpeaks-SPA function, the response relationship between biochemical components and spectral continuous wavelet coefficients was analyzed. The support vector machine classification algorithm was used for detection infection. The results showed that there was no significant difference in the biochemical composition between healthy and early-stage samples, but the spectral continuous wavelet coefficients could reflect these subtle changes with varying degrees of sensitivity. The continuous wavelet coefficients corresponding to these stresses may have high potential for infection detection. Meanwhile, the highest overall accuracy of the model based on chlorophyll content, fresh weight moisture content and dry weight moisture content were 90.48%, 85.71% and 90.48% respectively, and the Kappa coefficients were 0.85, 0.79 and 0.86 respectively.

Land use/cover change (LUCC) is becoming one of the most important and interesting problems in the study of global environmental change. Identifying the spatiotemporal behavior and associated driving forces behind changes in land use is crucial for the regional sustainable utilization of land resources. In this study, we consider the four municipalities of China (Beijing, Tianjin, Shanghai, and Chongqing) and compare their spatiotemporal changes in land use from 1990 to 2015 by employing intensity analysis and barycenter migration models. We then discuss their driving forces. The results show that the largest reduction and increase variations were mainly concentrated in arable and construction land, respectively. The decrement and increment were the largest in Shanghai, followed by Beijing and Tianjin, and the least in Chongqing. Furthermore, the results of the barycenter migration model indicate that in addition to Beijing, the migration distances of construction land were longer than those of arable land in three other cities. Moreover, the application of intensity analysis revealed that the rate of land use change was also the greatest in Shanghai and the slowest in Chongqing during the whole study period, with all of their arable land being mainly transformed into construction land. The driving force analysis results suggest that the spatial and temporal patterns of land use change were the results of the socio-economic development, national policies, and major events. In other words, where there was a high rate of economic and population growth, the intensity of land use change was relatively large.

Pine wilt disease (PWD) is one of the most destructive forest diseases that has led to rapid wilting and mortality in susceptible host pine trees. Spatially explicit detection of pine wood nematode (PWN)-induced infestation is important for forest management, policy making, and practices. Previous studies have mapped forest disturbances in response to various forest diseases and/or insects over large areas using remote-sensing techniques, but these efforts were often constrained by the limited availability of ground truth information needed for the calibration and validation of moderate-resolution satellite algorithms in the process of linking plot-scale measurements to satellite data. In this study, we proposed a two-level up-sampling strategy by integrating unmanned aerial vehicle (UAV) surveys and high-resolution Radarsat-2 satellite imagery for expanding the number of training samples at the 30-m resampled Sentinel-1 resolution. Random forest algorithms were separately used in the prediction of the Radarsat-2 and Sentinel-1 infestation map induced by PWN. After data acquisition in Muping District during August and September 2021, we first verified the ability of a deep-learning-based object detection algorithm (i.e., YOLOv5 model) in the detection of infested trees from coregistered UAV-based RGB images (Average Precision (AP) of larger than 70% and R² of 0.94). A random forest algorithm trained using the up-sampling UAV infestation map reference and corresponding Radarsat-2 pixel values was then used to produce the Radarsat-2 infestation map, resulting in an overall accuracy of 72.57%. Another random forest algorithm trained using the Radarsat-2 infestation pixels with moderate and high severity (i.e., an infestation severity of larger than 0.25, where the value was empirically set based on a trade-off between classification accuracy and infection detectability) and corresponding Sentinel-1 pixel values was subsequently used to predict the Sentinel-1 infestation map, resulting in an overall accuracy of 87.63%, where the validation data are Radarsat-2 references rather than UAV references. The Sentinel-1 map was also validated by independent UAV surveys, with an overall accuracy of 76.30% and a Kappa coefficient of 0.45. We found that the expanded training samples by the integration of UAV and Radarsat-2 strengthened the medium-resolution Sentinel-1-based prediction model of PWD. This study demonstrates that the proposed method enables effective PWN infestation mapping over multiple scales.

Erannis jacobsoni Djak (Lepidoptera, Geometridae) is a leaf-feeding pest unique to Mongolia. Outbreaks of this pest can cause larch needles to shed slowly from the top until they die, leading to a serious imbalance in the forest ecosystem. In this work, to address the need for the low-cost, fast, and effective identification of this pest, we used field survey indicators and UAV images of larch forests in Binder, Khentii, Mongolia, a typical site of Erannis jacobsoni Djak pest outbreaks, as the base data, calculated relevant multispectral and red–green–blue (RGB) features, used a successive projections algorithm (SPA) to extract features that are sensitive to the level of pest damage, and constructed a recognition model of Erannis jacobsoni Djak pest damage by combining patterns in the RGB vegetation indices and texture features (RGB_VI&TF) with the help of random forest (RF) and convolutional neural network (CNN) algorithms. The results were compared and evaluated with multispectral vegetation indices (MS_VI) to explore the potential of UAV RGB images in identifying needle pests. The results show that the sensitive features extracted based on SPA can adequately capture the changes in the forest appearance parameters such as the leaf loss rate and the colour of the larch canopy under pest damage conditions and can be used as effective input variables for the model. The RGB_VI&TF-RF₄₄₀ and RGB_VI&TF-CNN₇₄₀ models have the best performance, with their overall accuracy reaching more than 85%, which is a significant improvement compared with that of the RGB_VI model, and their accuracy is similar to that of the MS_VI model. This low-cost and high-efficiency method can excel in the identification of Erannis jacobsoni Djak-infested regions in small areas and can provide an important experimental theoretical basis for subsequent large-scale forest pest monitoring with a high spatiotemporal resolution.

Water use efficiency (WUE) reflects the balance between carbon assimilation and water consumption in terrestrial ecosystems. Considering the fragile conditions of global water resources, the evaluation of regional WUE variation characteristics and response mechanisms is critical for promoting sustainable ecological development and water resource utilization. Based on gross primary productivity (GPP) and evapotranspiration (ET) datasets, combined with vegetation and meteorological data, this study examined the spatiotemporal variations, annual variation contribution rate, and driving mechanism of WUE in Inner Mongolia from 2001 to 2020. The main results are as follows: (1) The interannual and spatial variations of GPP, ET, and WUE all exhibited increasing trends, with WUE increasing in approximately 70% of the region and significantly increasing in 22.35% of pixels exhibiting a significant increase. Areas with the most significant increases were located in the Horqin sandy land and Mu Us sandy land. (2) The highest WUE values were observed in the summer season, followed by autumn and winter, and the lowest in spring. (3) Among all vegetation types, the typical steppe ecosystems contributed most to the interannual variability (IAV) of GPP, ET, and WUE, with values of 169.89%, 141.09%, and 193.42%, respectively. While the coniferous forest contributed least or negatively to GPP, ET, and WUE IAV, with values of −36.28%, 28.20%, and −32.86%, respectively. (4) The primary driver of WUE variation was found to be GPP, which contributed 59.36%, mainly in the central and western regions. The remaining 40.64% was attributable to ET, concentrated in the northeast region. (5) Human activities significantly affected WUE, with a contribution (about 53.52%) larger than that of climate change (nearly 46.48%). Increased precipitation improves vegetation WUE and is the most important climate factor influencing WUE variations. These findings will aid the formulation of vegetation protection and water resource management strategies in water-stressed areas.

While unmanned aerial vehicle (UAV) remote sensing technology has been successfully used in crop vegetation pest monitoring, a new approach to forest pest monitoring that can be replicated still needs to be explored. The aim of this study was to develop a model for identifying the degree of damage to forest trees caused by Erannis jacobsoni Djak. (EJD). By calculating UAV multispectral vegetation indices (VIs) and texture features (TF), the features sensitive to the degree of tree damage were extracted using the successive projections algorithm (SPA) and analysis of variance (ANOVA), and a one-dimensional convolutional neural network (1D-CNN), random forest (RF), and support vector machine (SVM) were used to construct damage degree recognition models. The overall accuracy (OA), Kappa, Macro-Recall (R_macro), and Macro-F1 score (F1_macro) of all models exceeded 0.8, and the best results were obtained for the 1D-CNN based on the vegetation index sensitive feature set (OA: 0.8950, Kappa: 0.8666, R_macro: 0.8859, F1_macro: 0.8839), while the SVM results based on both vegetation indices and texture features exhibited the poorest performance (OA: 0.8450, Kappa: 0.8082, R_macro: 0.8415, F1_macro: 0.8335). The results for the stand damage level identified by the models were generally consistent with the field survey results, but the results of SVM_VIs+TF were poor. Overall, the 1D-CNN showed the best recognition performance, followed by the RF and SVM. Therefore, the results of this study can serve as an important and practical reference for the accurate and efficient identification of the damage level of forest trees attacked by EJD and for the scientific management of forest pests.