Inland water bodies (particularly ponds) emit a significant amount of greenhouse gases (GHGs), particularly methane (CH4), carbon dioxide (CO2), and a comparatively low amount of nitrous oxide (N2O) to the atmosphere. In recent decades, ponds (<10,000 m2) probably account for about 1/3rd of the global lake perimeter and are considered a hotspot of GHG emissions. High nutrients and waterlogged conditions provide an ideal environment for CH4 production and emission. The rate of emissions differs according to climatic regions and is influenced by several biotic and abiotic factors, such as temperature, nutrients (C, N, & P), pH, dissolved oxygen, sediments, water depth, etc. Moreover, micro and macro planktons play a significant role in CO2 and CH4 emissions from ponds systems. Generally, in freshwater bodies, the produced N2O diffuses in the water and is converted into N2 gas through different biological processes. There are several other factors and mechanisms which significantly affect the CH4 and CO2 emission rate from ponds and need a comprehensive evaluation. This study aims to develop a decisive understanding of GHG emissions mechanisms, processes, and methods of measurement from ponds. Key factors affecting the emissions rate will also be discussed. This review will be highly useful for the environmentalists, policymakers, and water resources planners and managers to take suitable mitigation measures in advance so that the climatic impact could be reduced in the future.
Ferroelectric ceramics are the most promising material for electrically tunable devices and found its application in microwave devices such as phase shifters, varactors and tunable oscillators and detectors. It has been reported that various non-ferroelectric compound such as carbon nanotubes (CNT), ferrites and microwave dielectrics are used for electrically tunable dielectric materials. This review paper gives overall summary of tungsten bronze ferroelectric ceramics on developing electrically tunable ferroelectric material and improving performance of dielectric material for various applications in microwave devices.
The rheological and tribological properties of 0.5%, 1.0%, 1.5% and 2% CuO nanoparticles by weight blended in engine oil were studied. Surfactants were used to ensure maximum possible dispersion of the nanoparticles in engine oil. Samples were tested for viscosity, stress, torque and shear rate to be compared with data for just engine oil. Characterization of the Copper Oxide nanoparticles was done using an XRD, FTIR, photoluminescence, UV-Vis spectroscopy and Particle Size Analyzer. Overall, nanoparticle additives seem to result in lower viscosity and lower torque. There was also a force of friction and wear test done on a pin-on-disk machine for all blends. The analysis revealed that 1 wt% CuO blend resulted in low wear and force of friction with improved lubricity of oil. Graphical Abstract
29 July 2014 in Particulate Science and Technology
The processing conditions, microstructure and dielectric properties of strontium bismuth titanate (SBT) were studied by means of Ca substitution in the strontium site referred to hereinafter as SCBT. The mechano-chemical activation method permits one to reduce the particle size of the initial products, so the surface area of the powder is increased, improving in most cases its reactivity. X-ray diffraction analysis showed the formation of a single-phase layered perovskite structure of SCBT. Morphological studies were carried out by SEM analysis. Dielectric measurements in the frequency 100 Hz–1 MHz were made using an Impedance Analyzer (HP4192A) interfaced to a computer and the measurements were carried out from room temperature to 600°C. a variation in the dielectric constant was observed by the incorporation of calcium into the layered perovskite structure. The hysteresis loop revealed a variation in remnant polarization with the substitution of calcium in strontium. Resonance studies were made on poled sample using an Impedance Analyzer. Elastic compliance [s33, s11] and coupling factor [k33, k31] were also obtained.