In atmospheric laser communication, a beam is transmitted through an atmospheric channel, and the photocurrent output from a quadrant detector (QD) used as the tracking sensor fluctuates significantly. To ensure uninterrupted communication and to adapt to such fluctuations, in this paper we apply logarithmic amplifiers to process the output signals of a QD. To further improve the measurement accuracy of the spot position, we firstly propose an integral infinite log-ratio algorithm (IILRA) and an integral infinity log-ratio algorithm based on the signal-to-noise ratio (BSNR-IILRA) through analysis of the factors influencing the measurement error considering the signal-to-noise ratio (SNR) parameter. Secondly, the measurement error of the two algorithms under different SNRs and their variations are analyzed. Finally, a spot position detection experiment platform is built to correctly and efficiently verify the two algorithms. The experimental results show that when the SNR is 54.10 dB, the maximum error and root mean square error of the spot position of the IILRA are 0.0054 mm and 0.0039 mm, respectively, which are less than half those of the center approximation algorithm (CAA). When the SNR is 23.88 dB, the maximum error and root mean square error of the spot position of the BSNR-IILRA are 0.0046 mm and 0.0034 mm, respectively, which are one-thirtieth and one-twentieth of the CAA, respectively. The spot position measurement accuracy of the two proposed algorithms is significantly improved compared with the CAA.

The pointing accuracy of the Risley prisms beam-steering system mainly depends on the accuracy of the solution method and the impact of the error on the solution. To improve pointing accuracy, the impact of systematic errors on the inverse solution precision is investigated and a correction method is proposed. First, a more accurate error model for Risley prisms is established, and the errors are obtained by the parameter identification method, which corrects the forward solution error. Second, we explain the reason for the error generated by the inverse solution and analyze the variation of the inverse solution error magnitude with the beam deflection angle. A correction method based on pointing-field transformation is proposed. Finally, simulations and experiments are performed to verify the feasibility of the method. Experimental results show that when the beam deflection angle is equal to 0.1°, the maximum and RMS values of the pointing error are reduced by 94.08% and 95.18%, respectively.

In this paper, we study the characteristics of the supercontinuum (SC) induced by the filamentation of two typical vortex beams (i.e., Laguerre-Gaussian (LG) and Bessel-Gaussian (BG) beams) in water. By moving the cuvette filled with water along the laser propagation path, we measure the SC induced by the filamentation of the two vortex beams at different positions in water. The results show that the degree of spectral broadening induced by the filamentation of LG beams hardly changes with the change of position, while for BG beams, the spectral broadening induced by filamentation is weak on both sides and strong in the middle. The value of topological charge (TC) affects the length of the filament formed by BG beams; however, its effect on the spectral broadening induced by the filamentation of LG and BG beams is negligible.