Fei Lin

Dr. Fei Lin

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 October 2020 in Lubricants
Verified
Journal Article
Open access
PDF file
Hui WuHui Wu
Hui Wu
HKHamidreza Kamali
Hamidreza Kamali
MHMingshuai Huo
Mingshuai Huo
Fei LinFei Lin
Fei Lin
SHShuiquan Huang
Shuiquan Huang
Zhengyi JiangZhengyi Jiang
Zhengyi Jiang
Eco-friendly and low-cost water-based nanolubricants containing rutile TiO2 nanoparticles (NPs) were developed for accelerating their applications in industrial-scale hot steel rolling. The lubrication performance of developed nanolubricants was evaluated in a 2-high Hille 100 experimental rolling mill at a rolling temperature of 850 °C in comparison to that of pure water. The results indicate that the use of nanolubricant enables one to decrease the rolling force, reduce the surface roughness and the oxide scale thickness, and enhance the surface hardness. In particular, the nanolubricant consisting of 4 wt % TiO2, 10 wt % glycerol, 0.2 wt % sodium dodecyl benzene sulfonate (SDBS) and 1 wt % Snailcool exhibits the best lubrication performance by lowering the rolling force, surface roughness and oxide scale thickness by up to 8.1%, 53.7% and 50%, respectively. The surface hardness is increased by 4.4%. The corresponding lubrication mechanisms are attributed to its superior wettability and thermal conductivity associated with the synergistic effect of rolling, mending and laminae forming that are contributed by TiO2 NPs.


6 March 2023 in Materials Science and Engineering: A
Verified
Journal Article
Open access
MRMengyuan Ren
Mengyuan Ren
HXHaibo Xie
Haibo Xie
Fei LinFei Lin
Fei Lin
FJFanghui Jia
Fanghui Jia
MHMingshuai Huo
Mingshuai Huo
ZJZhengyi Jiang
Zhengyi Jiang

26 May 2022 in Metals
Verified
Journal Article
Open access
PDF file
HZHongmei Zhang
Hongmei Zhang
Mingshuai HuoMingshuai Huo
Mingshuai Huo
ZMZhiqiang Ma
Zhiqiang Ma
Hui WuHui Wu
Hui Wu
Guanqiao SuGuanqiao Su
Guanqiao Su
Zhengyi JiangZhengyi Jiang
Zhengyi Jiang
The construction of heavy polar icebreakers is usually done with special hull steels, which require comprehensive properties such as good low-temperature toughness, high strength, and superior fatigue resistance. Reasonable and satisfactory heat treatments should be investigated and applied to acquire the required high strength and superior low-temperature toughness, since this is deemed an effective approach to ameliorate the combined properties of high-strength hull steels. Regarding this, the present study specifically explores the effects of different laboratory-based quenching (850 to 930 °C) and tempering (580 to 660 °C) heat treatments on the final low-temperature toughness of the high-strength hull steels. The low-temperature toughness is eventually improved without significantly sacrificing the strength. The results show that a favourable combination of properties can be obtained in the specimens under 900 °C quenching and 660 °C tempering processes. Additionality, the specimens tempered at 620 °C present the highest hardness, owing to the higher percentage of tempered martensite. Detailed mechanisms of the enhanced properties of the typical specimens subjected to the corresponding quenching and tempering processing are analysed and explicated.

11 May 2023 in Crystals
Verified
Journal Article
Open access
PDF file
Fei LinFei Lin
Fei Lin
Mengyuan RenMengyuan Ren
Mengyuan Ren
Hui WuHui Wu
Hui Wu
Fanghui JiaFanghui Jia
Fanghui Jia
MYMing Yang
Ming Yang
Zhengyi JiangZhengyi Jiang
Zhengyi Jiang
At present, Al matrix composites (AMCs) have drawn much attention owing to their light weight, high specific strength, high thermal conductivity, and superior excellent wear resistance, which endows them with great potential in the aerospace, automobile and military industries. In this study, AMCs with different Ti contents (0, 5 and 10 vol.%) were prepared by powder metallurgy. During the sintering, Al3Ti particles were in situ formed in the Al matrix. It was found that the Ti completely reacted with the Al matrix and formed fine in situ Al3Ti particles in Al-10Ti, while some large Ti-Al3Ti core-shell formed in Al-5Ti due to the incomplete reaction between the Ti and the Al matrix. Furthermore, the hardness of the composites was significantly improved by the in situ formed Al3Ti particles, reaching 143.3 HV in Al-5Ti and the highest value at 331.2 HV in Al-10Ti, respectively. The wear resistance of the composites is remarkably enhanced by Al3Ti particles compared to the unreinforced Al. Al-5Ti has the highest wear resistance among the samples. The wear resistance of the Al-10Ti composite becomes slightly deteriorated compared to Al-5Ti due to the brittle nature of Al3Ti, which leads to a three-body abrasive wear.

8 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
SYShengnan Yuan
Shengnan Yuan
CZCunlong Zhou
Cunlong Zhou
HXHaibo Xie
Haibo Xie
MRMengyuan Ren
Mengyuan Ren
Fei LinFei Lin
Fei Lin
Zhengyi JiangZhengyi Jiang
Zhengyi Jiang
This study examines the deformation behaviour and fracture mechanisms of bimetal composites (BCs) composed of high-carbon medium-manganese steel (Mn8) and low-carbon steel (SS400), fabricated through hot roll bonding. The research highlights the effect of varying thickness ratios on the mechanical properties of Mn8/SS400 BCs. The microstructure and interfacial characteristics were analysed using scanning electron microscopy (SEM), revealing a well-bonded and defect-free interface with distinct elemental distributions. Tensile and bending tests were conducted to evaluate the composites’ mechanical performance, highlighting the synergistic effects of Mn8’s high strain hardening capacity and SS400’s ductility. Mathematical models, including the rule of mixtures (ROM) and the long-wavelength approach (LWA), were employed to predict the tensile strength and plastic instability strain (PIS), with experimental results showing deviations due to interfacial strengthening mechanisms and dislocation pile-ups. The findings provide insights into the interplay between layer thickness ratios, interfacial properties, and strain hardening, offering valuable guidance for optimising the design and industrial-scale production of Mn8/SS400 BCs.