Zlatan Stanojevic

Dr. Zlatan Stanojevic


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 March 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
JBJosip Bobinac
Josip Bobinac
TRTobias Reiter
Tobias Reiter
JPJulius Piso
Julius Piso
XKXaver Klemenschits
Xaver Klemenschits
OBOskar Baumgartner
Oskar Baumgartner
Lado FilipovicLado Filipovic
Lado Filipovic
It is becoming quite evident that, when it comes to the further scaling of advanced node transistors, increasing the flash memory storage capacity, and enabling the on-chip integration of multiple functionalities, “there’s plenty of room at the top”. The fabrication of vertical, three-dimensional features as enablers of these advanced technologies in semiconductor devices is commonly achieved using plasma etching. Of the available plasma chemistries, SF6/O2 is one of the most frequently applied. Therefore, having a predictive model for this process is indispensable in the design cycle of semiconductor devices. In this work, we implement a physical SF6/O2 plasma etching model which is based on Langmuir adsorption and is calibrated and validated to published equipment parameters. The model is implemented in a broadly applicable in-house process simulator ViennaPS, which includes Monte Carlo ray tracing and a level set-based surface description. We then use the model to study the impact of the mask geometry on the feature profile, when etching through circular and rectangular mask openings. The resulting dimensions of a cylindrical hole or trench can vary greatly due to variations in mask properties, such as its etch rate, taper angle, faceting, and thickness. The peak depth for both the etched cylindrical hole and trench occurs when the mask is tapered at about 0.5°, and this peak shifts towards higher angles in the case of high passivation effects during the etch. The minimum bowing occurs at the peak depth, and it increases with an increasing taper angle. For thin-mask faceting, it is observed that the maximum depth increases with an increasing taper angle, without a significant variation between thin masks. Bowing is observed to be at a maximum when the mask taper angle is between 15° and 20°. Finally, the mask etch rate variation, describing the etching of different mask materials, shows that, when a significant portion of the mask is etched away, there is a notable increase in vertical etching and a decrease in bowing. Ultimately, the implemented model and framework are useful for providing a guideline for mask design rules.

26 May 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
ZSZlatan Stanojevic
Zlatan Stanojevic
CTChen-Ming Tsai
Chen-Ming Tsai
GSGeorg Strof
Georg Strof
FMFerdinand Mitterbauer
Ferdinand Mitterbauer
OBOskar Baumgartner
Oskar Baumgartner
MKMarkus Karner
Markus Karner
We present an in-depth discussion on the subband Boltzmann transport (SBTE) methodology, its evolution, and its application to the simulation of nanoscale MOSFETs. The evolution of the method is presented from the point of view of developing a commercial general-purpose SBTE solver, the GTS nano device simulator (NDS). We show a wide range of applications SBTE is suited for, including state-of-the-art nonplanar and well-established planar technologies. It is demonstrated how SBTE can be employed both as a path-finding tool and a fundamental component in a DTCO-flow.

1 December 2015
Verified
Conference Paper
Closed access
ZSZlatan Stanojevic
Zlatan Stanojevic
OBO. Baumgartner
O. Baumgartner
FMF. Mitterbauer
F. Mitterbauer
HDH. Demel
H. Demel
CKC. Kernstock
C. Kernstock
EWE. Wimmer
E. Wimmer
We go far beyond classical TCAD in and create a simulation framework that is ready for devices based on contemporary and future technology nodes. We do so by extending the common drift-diffusion-type device simulation framework with additional tools: (i) a k p-based subband structure tool, (ii) a deterministic subband Boltzmann transport solver, and (iii) a TCAD-compatible quantum transport solver, to capture every important aspect of device operation at the nano-scale. An atomistic ab-initio tool suite complements the framework providing material properties that would be hard to obtain otherwise. The capabilities of the approach are demonstrated on two different devices featuring non-planar geometry and alternative channel materials.

30 December 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
ZSZlatan Stanojevic
Zlatan Stanojevic
JGJose Maria Gonzalez-Medina
Jose Maria Gonzalez-Medina
FSFranz Schanovsky
Franz Schanovsky
MKMarkus Karner
Markus Karner
We present a novel approach to solving the transport problem in semiconductors. We reformulate the drift-diffusion (DD) equations in terms of the quasi-Fermi-energies as solution variables; a drastic increase in numerical stability is achieved, which permits the simulation of devices at cryogenic temperatures as well as wide bandgap devices using double precision arithmetic, instead of extended precision arithmetic which would otherwise be required to solve these applications using regular DD.

18 December 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
FSF. Schanovsky
F. Schanovsky
DVD. Verreck
D. Verreck
ZSZlatan Stanojevic
Zlatan Stanojevic
SSS. Schallert
S. Schallert
AAA. Arreghini
A. Arreghini
MKM. Karner
M. Karner
We present a novel approach to the modeling of carrier energy relaxation during high-field phases in semiconductor-oxide-nitride-oxide-semiconductor (SONOS) flash memory gate stacks. We show that this method integrates well with TCAD simulators and that taking the energy relaxation of carriers into consideration solves two of the most prominent problems of trapping layer dynamics modeling: The missing slope degradation in incremental step-pulse programming (ISPP) simulations and the incompatibility of the resulting charge distributions with long-term room temperature charge retention measurements. This article consists of two parts where this part discusses the physical/TCAD level. The second part derives a semianalytical model specifically for programming that reduces the numerical complexity while still retaining the main physical assumptions and the applicability to experimental data.

8 December 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
DVDevin Verreck
Devin Verreck
FSFranz Schanovsky
Franz Schanovsky
AAAntonio Arreghini
Antonio Arreghini
GBGeert Van Den Bosch
Geert Van Den Bosch
ZSZlatan Stanojevic
Zlatan Stanojevic
MRMaarten Rosmeulen
Maarten Rosmeulen
Flash memory with a charge trap layer (CTL), also known as silicon-oxide-nitride-oxide-silicon (SONOS), is the most common type in production, yet there is a lack of consensus on the physical modeling of its operation. In Part I, we therefore proposed a full TCAD model based on an energy relaxation approach and showed that it captures experimentally observed memory operation. This numerical model, however, comes with considerable complexity and computational cost. In Part II, we therefore construct a semianalytical model based on similar physical assumptions, called Pheido, to be as simple as possible. We first derive the model equations based on a balance of current densities, detailing the approximations made. We then use Pheido to analyze the various regimes of an experimental incremental step pulse programming (ISPP) curve and compare it to the full TCAD model derived in Part I. Finally, we investigate the impact of material and structural cell parameters on the ISPP curve, illustrating how the Pheido model offers wide utility at low computational cost.