12 July 2022 in IEEE Transactions on Electron Devices
High endurance of 10 11 cycles is demonstrated in ~9–10-nm stoichiometric Hafnium Zirconate (HZO) metal–ferroelectric–metal (MFM) capacitors deposited using Cl precursors with La and Y dopants. La doping is shown to offer higher remnant polarization than Y. Investigation of doped layers with asymmetric polarization versus electric field ( ${P}$ – ${E}$ ) measurements and unipolar fatigue cycles suggests that in the pristine state, the HZO is comprised of ferroelectric domains with internal built-in electric field-induced pinned coercive field ( ${E}_{c}$ ). Doping is shown to increase the pinning effect and two distinct groups of ferroelectric domains emerge, which is antialigned at zero applied electric field ( ${E}$ ). The antiferroelectric-like (pinched ${P}$ – ${E}$ loop) behavior is therefore attributed to internal built-in ${E}$ -induced pinning of the domains during growth and/or annealing steps. The initial wake-up is attributed to gradual depinning of the domains with bipolar electric pulses. Suppression of monoclinic phase was observed in doped layers that survive 10 11 cycles. The wake-up is shown to be dependent on total duration and magnitude of bipolar electric pulses. Precycling scheme is demonstrated for stable operation at a lower field.
26 July 2021 in IEEE Transactions on Electron Devices
The ferroelectric (FE)-HfO₂-based field-effect transistor (FEFET) is a promising candidate for emerging memory. However, data retention (DR) loss has been flagged as a key issue. Although two models of DR loss in FEFET have been proposed--the charge trapping model and the depolarization model--it is difficult to separate the dominant cause. In this article, simultaneous P-V and I-V measurements are performed which enable separation of these mechanisms. Different behavior of polarization and threshold voltage loss and recovery in a ``set'' state between two types of FEFET structures, metal (TiN)/FE-HfO₂/SiO₂/Si substrate (MFIS) and metal (TiN)/Si/FE-HfO₂/SiO₂/Si-substrate (MSFIS), clarify that the dominant mechanism of the DR loss in both structures is different. In addition, the impact of external bias and interfacial layer (IL) on the DR loss is revealed: the polarization loss is strongly affected by the external bias in both types of FEFET, indicating effective work function (eWF) has a strong impact on depolarization. On the other hand, the thickness and processing of IL strongly impact the charge trapping characteristics. Based on our understanding, excellent improvement of the DR is achieved: memory window ~0.8 V at 85 °C, extrapolated to ten years.
5 August 2021 in IEEE Electron Device Letters
The endurance of the HfO 2 -based ferroelectric FET (FeFET) is investigated using various program/erase (PG/ER) pulse schemes. The ramp time (T ramp ), which is the time to reach the PG/ER voltage, and the hold time (T hold ), which is the time duration to maintain the PG/ER voltage, are adjusted, and thereafter, their influence on endurance is observed through the memory window, subthreshold slope, and threshold voltage of the FeFET while the FeFET is cycled up to 10 4 by a sequence of PG/ER pulses. Both parameters are closely related to depassivating interface traps, and it turns out that a long T ramp but short T hold are desirable to suppress the interface trap generation in FeFET. The relation between T ramp , T hold and the interface trap generation is explained by the transient built-in electric field (which is generated by the transiently trapped carrier in the gate oxide when the gate voltage is swept rapidly).
18 December 2023 in IEEE Transactions on Electron Devices
We present a novel approach to the modeling of carrier energy relaxation during high-field phases in semiconductor-oxide-nitride-oxide-semiconductor (SONOS) flash memory gate stacks. We show that this method integrates well with TCAD simulators and that taking the energy relaxation of carriers into consideration solves two of the most prominent problems of trapping layer dynamics modeling: The missing slope degradation in incremental step-pulse programming (ISPP) simulations and the incompatibility of the resulting charge distributions with long-term room temperature charge retention measurements. This article consists of two parts where this part discusses the physical/TCAD level. The second part derives a semianalytical model specifically for programming that reduces the numerical complexity while still retaining the main physical assumptions and the applicability to experimental data.
8 December 2023 in IEEE Transactions on Electron Devices
Flash memory with a charge trap layer (CTL), also known as silicon-oxide-nitride-oxide-silicon (SONOS), is the most common type in production, yet there is a lack of consensus on the physical modeling of its operation. In Part I, we therefore proposed a full TCAD model based on an energy relaxation approach and showed that it captures experimentally observed memory operation. This numerical model, however, comes with considerable complexity and computational cost. In Part II, we therefore construct a semianalytical model based on similar physical assumptions, called Pheido, to be as simple as possible. We first derive the model equations based on a balance of current densities, detailing the approximations made. We then use Pheido to analyze the various regimes of an experimental incremental step pulse programming (ISPP) curve and compare it to the full TCAD model derived in Part I. Finally, we investigate the impact of material and structural cell parameters on the ISPP curve, illustrating how the Pheido model offers wide utility at low computational cost.
30 September 2020 in IEEE Transactions on Electron Devices
This work experimentally investigates current conduction in 3-D nand under up to 7 GPa of externally applied compressive mechanical stress. The impact of channel crystallinity and geometry is studied by comparing four types of Si channels: polycrystalline full channel, single-crystal full channel, polycrystalline macaroni channel, and single-crystal macaroni channel. In the studied channel types, the mechanical stress was found to cause reversible degradation of Ion (up to one order of magnitude) and Ioff (up to seven orders of magnitude). Using TCAD simulations, Ion and Ioff deterioration are attributed to carrier mobility and Si bandgap decreases under mechanical stress, respectively. The simulations also suggest that both effects depend on the channel morphology, which results in a different extent of stress impact on the four studied types of Si channels.