This study aimed to produce modified cellulose extracted from oat hulls by an esterification reaction with citric acid (CA) employing ultrasonication and reactive extrusion assisted processes. Modified samples were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (DRX), scanning electron microscopy (SEM), wettability, oil and water absorption capacities, water adsorption capacity, and thermal stability. From FTIR results it can be observed a new band for all modified samples at 1735 cm−1, confirming the esterification. The morphology and crystallinity pattern of fibers were not affected by esterification, and crystallinity indexes ranged from 43% (unmodified cellulose) to 44–49% in modified samples. Both groups of samples, obtained by ultrasonication and reactive extrusion, showed decreases in water absorption capacities (1.63–1.71 g/g) compared to unmodified cellulose (9.38 g/g). It was observed an increase in oil retention capacity from 1.80 g/g (unmodified cellulose) to 4.57–7.31 g/g after esterification, and also the modified samples presented higher affinity by a non-polar solvent in the wettability test. The new properties of modified cellulose expand its use in the industry and prove that ultrasonication and reactive extrusion can be used to obtain esterified cellulose, being eco-friendly, simple, and convenient processes with short reaction times.
2 October 2020 in Journal of the Science of Food and Agriculture
Brazil, known for its robust agricultural sector, generates substantial amounts of lignocellulosic residues annually. The valorization of these residues as ingredients for the food industry aligns with environmental, social, and economic sustainability goals. Coffee hull, a by-product of the coffee industry, holds potential as a source for creating high-value food ingredients. This study aimed to develop a multifunctional, fiber-rich ingredient from the coffee hull using a one-step reactive extrusion process with either alkaline hydrogen peroxide or sulfuric acid. The coffee hull was subjected to extrusion with sulfuric acid (1% and 3%) or alkaline hydrogen peroxide (1% and 3%) in these one-step processes. The resulting materials were then analyzed for their physicochemical and techno-functional properties. All treated samples demonstrated an increased cellulose and insoluble dietary fiber content, along with enhanced porosity, as observed through scanning electron microscopy. The sample treated with 3% alkaline hydrogen peroxide (AHP3) exhibited the highest levels of cellulose (45.17%), insoluble dietary fiber (78.20%), density (3.54), water absorption capacity (1.96 g/g), and oil absorption capacity (0.86 g/g). Furthermore, all samples displayed thermal stability from room temperature up to 300 °C, and a reduction in crystallinity indexes was noted after treatment. The reactive extrusion method proved effective in modifying the coffee hull, offering a green approach to producing high-value products from lignocellulosic waste. This method presents several advantages, including short reaction times, low reagent concentrations, minimal or no effluent generation, and potential scalability for industrial scale.
Access to safe food is fundamental to human health, creating a growing demand for efficient methods to detect hazardous substances in the food supply. Hydr