Ti4+-doped V2O5 films with nanowires on top and a dense, long nanorod layer on the bottom were successfully fabricated using the spin-coating route. During the electrochromic cycling, charge transfer resistance (Rct) decreases while ion-diffusion ability (KΩ) rapidly drops in the first ten cycles and then levels off. Low Rct and morphology of nanowires collaboratively improved the electrochromic behavior of Ti4+-doped V2O5 films by enhancing the charge transfer speed and minimizing polarization and dissolution. The obtained Ti4+-doped V2O5 film shows better electrochromic properties than the undoped V2O5 film, with a coloration efficiency (CE) of 34.15 cm2/C, coloration time of 9.00 s, and cyclic retention of 82.6% at cycle 100. In contrast, the corresponding values for the undoped V2O5 film were 23.57 cm2/C, 13.16 s, and 43.6%.
Spinel ferrites represented crystallographically as where the inversion degree j defines the fraction of tetrahedral (A) or octahedral (B) sites occupied by Fe3+ or M2+ cations, exhibit properties that are highly sensitive to cation distribution. This inversion degree j, reflecting the distribution of cations between A and B sites, has a profound impact on their physical properties, particularly magnetic and electrical characteristics. Tailoring these properties often requires precise control over cation distribution, achieved through various synthetic approaches. Unlike traditional high-temperature synthesis methods, such as ceramic processing, spinel ferrite nanoparticles synthesized at lower temperatures often exhibit non-equilibrium cation distributions. This results in physical properties markedly distinct from their bulk counterparts. This chapter begins by introducing generic ferrimagnetic systems and nanoscale magnetic phenomena before focusing on spinel ferrite nanomaterials. The discussion covers their crystal structure, diverse synthesis methods—from conventional techniques to novel approaches—and strategies for tuning their magnetic properties. Additionally, their applications in magnetism, environmental remediation, biomedicine, and hyperthermia are explored. The chapter concludes with an overview of current scientific challenges and future research directions in the field.
The open-layered structure of Vanadium pentoxide (V2O5) has triggered significant interest in exploring its energy-related application as lithium (Li) intercalation cathode material. Various methods are extensively studied to improve the Li diffusion using thin films or nanoarchitecture. In this work, high-quality two-dimensional (2D) inverse opal α-V2O5 films were synthesized via a modified ‘dynamic hard template’ infiltration strategy using sacrificial polystyrene spheres (PS, a diameter of 530 nm) photonic crystal as a template. The new material exhibited an excellent porous array with featured structural colors in a large area. The electrochromic behavior was explored by combining bandgap and electrochemical characterization. On the one hand, the intercalation/deintercalation of Li+ played an important role in the bandgap (Eg), and thereafter on the visible range transmittance through changing the film’s stoichiometry and the valence of vanadium ions. On the other hand, the asymmetry of the lattice due to the disordered distribution of Li+ within the V2O5 interlayer and/or the formation of an irreversible phase explained the change in transmittance with voltage.
6 December 2022 in Journal of Materials Chemistry C
2D V2O5 IO films with various pore sizes and phases are fabricated, in which small pores buffer stress-induced pulverization but fasten chemical dissolution, while introducing a small amount of V6O13+y into V2O5 improves electrochromic and electrochemical cycling stability.
12 January 2023 in Journal of Materials Science: Materials in Electronics
A new strategy, the ‘alkaline steaming-assisted conversion route,’ has been developed to synthesize pure NiFe2O4 and CoFe2O4 nanoparticles by using ethylenediamine, together with ammonia, collectively as the alkaline steaming vapor.