Ionic liquid (IL) forms of drugs are increasingly being explored to address problems presented by poorly water-soluble drugs and solid-state stability. However, before ILs of active pharmaceutical ingredients (APIs) can be routinely incorporated into oral solid dosage forms (OSDs), challenges surrounding their ease of handling and manufacture must be addressed. To this end a framework for transforming API-ILs into solid forms at high loadings based on spray encapsulation using an immiscible polymer has recently been demonstrated. The current work demonstrates that this framework can be applied to a broad range of newly synthesized low glass transition temperature (Tg) API-ILs. Furthermore, the work explores a second novel approach to solidification of API-ILs based on polymer-API-IL miscibility that, to the best of our knowledge, has not been previously demonstrated. Modulated differential scanning calorimetry (mDSC) and attenuated total reflectance Fourier transform infrared spectroscopy showed that it was possible to produce spray dried solid materials, at acceptable loadings and yields for OSD applications in the form of both two-phase phase encapsulated systems and single phase amorphous solid dispersions (ASDs). This was achieved by the appropriate selection of an API-IL insoluble polymer (ethyl cellulose) for phase separated systems, or a miscible polymer with an exceptionally high Tg (the polysaccharide, maltodextrin) for the ASDs. Both approaches successfully overcame the Tg suppression associated with room temperature ILs. This work represents the first step to understanding the fundamental critical physical attributes of these systems to facilitate a more mechanistic methodology for their design.
The Harvard Ambient Particle Concentrator (HAPC) has been used routinely for exposure testing for a period of approximately three years. The stability of concentrator performance has been investigated as a function of local meteorological conditions, ambient particle concentrations, composition, and size distribution. Concentrator performance is characterized by the concentration enrichment factor (CEF), a ratio of concentrated particle mass (or sulfate) concentration to the ambient concentration. Over three years of normal operation, the mass and sulfate CEFs averaged 27.9 and 28.6, respectively. The majority of variability in the CEF was found to be related to the mass median aerodynamic diameter (MMAD) of ambient particles and to the HAPC's total operating pressure drop. The 50% cutpoint of the HAPC is 0.15 μ m. Between 0.15 and 2.5 μ m, the HAPC concentrates ambient particle mass by approximately a factor of 28. It is logical that changes in particle CEF should be influenced by the amount of ambient particle mass within the concentrator's effective size range. The concentrator operates optimally at a pressure drop of 2.5 in. of water per stage. Total pressure drop ranges from 7.5–25 in. of water, depending on the alignment of the slits of the virtual impactors and other parameters. Increases in the pressure drop result in decrease of the CEF, mainly due to excessive particle loss by impaction on the edges of the collection slit. In contrast, the minor operating pressure drop was found to be consistently lower on days where neither the ambient particle mass, temperature, or relative humidity were high. This subset of days was found to have a higher CEF than days where any of the three variables were high. The HAPC minor flow pressure drops are thus monitored carefully, since they are the most controllable indicator of concentration enrichment efficiency.
Magnetic iron oxide nanoparticles have multiple biomedical applications in AC-field hyperthermia and magnetic resonance imaging (MRI) contrast enhancement. Here, two cubic particle suspensions are analyzed in detail, one suspension displayed strong magnetic heating and MRI contrast efficacies, while the other responded weakly. This is despite them having almost identical size, morphology, and colloidal dispersion. Aberration-corrected scanning transmission electron microscopy, electron energy loss spectroscopy, and high-resolution transmission electron microscopy analysis confirmed that the spinel phase Fe3O4 was present in both samples and identified prominent crystal lattice defects for the weakly responding one. These are interpreted as frustrating the orientation of the moment within the cubic crystals. The relationship between crystal integrity and the moment magnitude and dynamics is elucidated for the case of fully dispersed single nanocubes, and its connection with the emergent hyperthermia and MRI contrast responses is established.
2 November 2024 in International Journal of Pharmaceutics