Polyurethane polymer grouting material has been effectively applied and promoted in the repair of road damages in nonfrozen areas. However, this material undergoes an exothermic reaction in the curing stage, which can cause a thermal disturbance in the frozen soil subgrade. To minimize the influence of the thermal disturbance of the polyurethane polymer grouting material in the repair of the frozen soil subgrade, an experiment was conducted to reduce the heat of the curing reaction under the influence of different proportions of a foaming agent, high-boiling point solvent, catalyst, and prepolymer. According to these test results, a proportioning scheme for the low exothermic polymer grouting material was formulated. The results indicated that the curing reaction temperature threshold of the polyurethane polymer grouting material was negatively related to the proportion of physical foaming agent (HCFC-141b) and high-boiling point solvent and positively related to the proportion of water weight. In the three stages of rapid temperature rise, slow temperature rise, and constant temperature, the rate of the temperature rise of the low exothermic polymer grouting material was lower than that of the common polymer, and the curing temperature threshold was 30.34 lower at a value of 101C. At a density of 80kg/m3, the compressive strength and tensile strength of the low heat release polymer grouting material were lower than those of the common polymer grouting material, thereby ensuring the excellent performance of polyurethane foam and providing a theoretical reference for the rapid repair of frozen soil roadbed diseases.
5 May 2022 in Mathematical Problems in Engineering
The seepage evolution characteristics and stability change rule of granite residual soil inside the high cutting slope under the action of rainfall infiltration were studied. Based on the saturated-unsaturated seepage theory, the numerical simulation of the rainwater infiltration path inside the granite residual soil slope was carried out under the condition of rainwater infiltration. The evolution characteristics of the seepage field of the granite residual soil cutting high slope under the condition of rainfall infiltration were revealed, and the influence of the rainwater infiltration on the stability of the granite residual soil slope was mainly studied. The research results show that with the accumulation of rainfall infiltration, the pore water pressure of the granite residual soil slope increases continuously, and the pore water pressure of the soil below the platform increases the fastest. With the increase in elevation, the water content of the slope presents a wave crest distribution. In the early stage of rainfall, the seepage velocity vector distribution on the slope surface is relatively uniform. In the middle stage of rainfall, the seepage velocity vector is the most dense at the platform, and the rainwater migration rate is accelerated. In the later stage of rainfall, the infiltrated rainwater at the slope angle of the first-level slope spreads to the surrounding area. With the continuous rainfall, the slope stability safety factor gradually decreased unevenly, and after the rainfall stopped, it gradually increased with the rainwater infiltration.
29 April 2022 in Mathematical Problems in Engineering
Polymer grouting materials have been widely used in road repair projects. In order to study the application of polymer grouting materials in repairing the joint cracks and voids of new and old subgrades in the reconstruction and expansion projects of expressways. According to the phenomenon investigation data, ABAQUS finite element software was used to establish a three-dimensional road mechanical response analysis model, and the mechanical response characteristics of the road before and after polymer grouting were systematically analyzed. The research results of the road which was repaired by polymer grouting show that the shear force between the polymer grouting material and the materials on both sides of the old and new subgrades can repair the cracks at the joint and the diseases in the void area of the new subgrade, so as to reduce the displacement and settlement of the road surface. The maximum dynamic stress peak value of the old and new subgrade road surfaces is located at the load action position, and with the increase of the distance from the load action position, the dynamic stress peak value gradually decreases, showing an M-shaped distribution as a whole. The original stress transfer law of the road structure was changed, so that the dynamic stress of the new subgrade is significantly smaller than that of the old subgrade. The critical surface formed between polymer grouting material and subgrade material has a certain shear strength, which reduces the tensile stress and strain between structural layers. It will improve the bearing capacity of the subgrade and at the same time provide a practical reference for the treatment of longitudinal cracks in the reconstruction and expansion of expressway.
Fiber-reinforced polymer (FRP) bars have better tensile strength and durability than normal steel bars. The use of FRP bars to replace steel bars in traditional concrete structures has attracted much attention in recent years. Similar to steel bars, the bond strength between FRP bars and concrete is a very important parameter in FRP-reinforced concrete structures, which directly affects the bearing capacity and safety of the structure. At present, the accuracy of calculating the bond strength between FRP bars and concrete under the action of high temperature still needs to be improved. In this study, a prediction model of bond strength between FRP bars and concrete at high temperatures was constructed by collecting 151 sets of experimental data, and six machine learning algorithms were used to construct the prediction model and perform parameter importance and sensitivity analyses. The results show that the XGBoost model can predict the bond strength between FRP bars and concrete more accurately. The conclusions obtained can provide a reference for the design of the specification to a certain extent.