BRUNO FILIPE GOMES RIBEIRO

Dr. BRUNO FILIPE GOMES RIBEIRO

Bio/Chemo/Mechanics of Materials, IMDEA Materials, Getafe, Spain
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
BRBRUNO FILIPE GOMES RIBEIRO
BRUNO FILIPE GOMES RIBEIRO
RORuben Offoiach
Ruben Offoiach
Ehsan RahimiEhsan Rahimi
Ehsan Rahimi
ESElisa Salatin
Elisa Salatin
MLMaria Lekka
Maria Lekka
LFLorenzo Fedrizzi
Lorenzo Fedrizzi
Different studies demonstrated the possibility to produce TiO2 nanotubes (TNTs) on Ti6Al4V alloy by electrochemical anodization. However, the anodizing behavior of α and β-phases in organic electrolytes is not yet clarified. This study reports on the anodizing behavior of the two phases in an ethylene glycol electrolyte using different applied potentials and anodizing times. Atomic force and scanning electron microscopies were used to highlight the anodic oxides differences in morphology. It was demonstrated that the initial compact oxide grew faster over the β-phase as the higher Al content of the α-phase caused its re-passivation, and the higher solubility of the V-rich oxide led to earlier pores formation over the β-phase. The trend was inverted once the pores formed over the compact oxide of the α-phase. The growth rate of the α-phase TNTs was higher than that of the β-phase ones, leading to the formation of long and well defined nanotubes with thin walls and a honeycomb tubular structure, while the ones grown over the β-phase were individual, shorter, and with thicker walls.

6 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
BRBRUNO FILIPE GOMES RIBEIRO
BRUNO FILIPE GOMES RIBEIRO
RORuben Offoiach
Ruben Offoiach
SRStefano Rossetti
Stefano Rossetti
ESElisa Salatin
Elisa Salatin
MLMaria Lekka
Maria Lekka
LFLorenzo Fedrizzi
Lorenzo Fedrizzi
Anodic oxidation of CP-Ti, for production of TiO2 nanotubes, has been extensively described in terms of the electrochemical mechanism of tubular growth or the effect of the parameters on the final tube morphology. Recently, a kinetic growth model was proposed to describe the distinct morphologies of the anodic oxide layer as phases of the nanotubular development process, offering a new perspective for the tuning of nanotube production. In this work, the anodizing behavior of a CP-Ti alloy in an ethylene glycol electrolyte was investigated in light of this new model. The final morphology of the nanotubes was characterized by SEM, considering the effects of electrolyte aging, the microstructure, the applied potential difference and time on the morphological development of nanotubes. Electrolyte aging was shown to lead to a decreased dissolution effect on the oxide. The applied potential difference was shown to lead to an increased dissolution effect and more rapid nanotube growth kinetics, while time resulted in extended dissolution. Moreover, the obtained results were analyzed considering a previous study focused on the anodizing behavior of the α- and β-phases of Ti6Al4V alloy. Overall, the tube morphology resembled that obtained for the Al-containing α-phase of the Ti6Al4V alloy, but the growth kinetics were considerably slower on CP-Ti.

8 February 2024 in Micro
Verified
Journal Article
Open access
PDF file
BRBRUNO FILIPE GOMES RIBEIRO
BRUNO FILIPE GOMES RIBEIRO
RORuben Offoiach
Ruben Offoiach
Cláudia MonteiroCláudia Monteiro
Cláudia Monteiro
MMMiguel R. G. Morais
Miguel R. G. Morais
MMMaria Cristina Martins
Maria Cristina Martins
MLMaria Lekka
Maria Lekka
Surface modification of the Ti6Al4V alloy (ASTM grade 5), with the fabrication of vertically oriented TiO2 nanotubes, has been receiving increasing attention both as a way to provide advanced bioactive features and the ability to act as reservoirs for a localized, controlled drug release. In this work, TiO2 nanotubes were grown on the surface of a Ti6Al4V alloy through electrochemical anodization. An ethylene glycol-based electrolyte containing 0.5 wt.% NH4F and 2.5% (v/v) H2O was used. Post-anodizing heat treatments at 500 °C in air atmosphere were performed to achieve a crystalline oxide layer with a higher mechanical stability. Following these treatments, Zn or Cu nanoparticles were incorporated into the nanotubular structures through electrodeposition processes. Then, the antimicrobial performance of the obtained surfaces was assessed against Staphylococcus epidermidis, a Gram-positive bacterium common in implant-related infections. Lastly, the cytotoxicity of the produced surface was evaluated against MC3T3-E1 mouse pre-osteoblast cells. In general, Cu-doped TiO2 nanotubes presented an almost total antimicrobial action, while Zn doped samples had a lower, but still significant antibacterial effect. However, a highly cytotoxic effect against MC3T3-E1 cells was observed on all anodized samples due to the release of vanadium from the alloy. In spite of this, the surface modification reported in this work can be a valid solution for existing commercially available orthopedic implants, considering that similar solutions were already studied in in vivo assays.

22 November 2023 in Materials Chemistry and Physics
Verified
Journal Article
Closed access
BRBRUNO FILIPE GOMES RIBEIRO
BRUNO FILIPE GOMES RIBEIRO
AVAntonio Vázquez-López
Antonio Vázquez-López
MVMiguel Vazquez-Pufleau
Miguel Vazquez-Pufleau
MLMIRELLA LLAMOSI
MIRELLA LLAMOSI
Julio SempereJulio Sempere
Julio Sempere
MRMONICA ECHEVERRY RENDON
MONICA ECHEVERRY RENDON

3 April 2026 in Antibiotics
Verified
Journal Article
Open access
PDF file
MLMIRELLA LLAMOSI
MIRELLA LLAMOSI
BRBRUNO FILIPE GOMES RIBEIRO
BRUNO FILIPE GOMES RIBEIRO
MRMONICA ECHEVERRY RENDON
MONICA ECHEVERRY RENDON
JYJose Yuste
Jose Yuste
Julio SempereJulio Sempere
Julio Sempere
MDMirian Domenech
Mirian Domenech
Objective: The objective of this study is to evaluate the ability of silver oxide nanoparticle (Ag2ONP)-functionalized high-efficiency particulate air (HEPA) filters and colloidal Ag2ONP suspensions to inhibit biofilm formation by major respiratory pathogens causing infections at operating rooms. Background: Respiratory infections caused by bacterial pathogens such as Streptococcus pneumoniae, Pseudomonas aeruginosa and Staphylococcus species are often associated with the formation of biofilms, which confer increased resistance to antibiotics and host immune responses. Effective strategies to prevent biofilm formation on biological surfaces and in air filtration systems are urgently needed in clinical settings. Methods: The biofilm-forming ability of each bacterial strain was assessed by crystal violet microplate assay, viable count or confocal microscopy after prior incubation of the culture medium with Ag2ONP-coated HEPA filter material or colloidal Ag2ONP suspension. Results: Both silver-functionalized filters and silver nanoparticle suspensions significantly inhibited biofilm formation by S. pneumoniae and P. aeruginosa, with near-complete suppression observed. In the case of S. aureus and S. epidermidis, the silver nanoparticle suspension showed partial inhibition of biofilm development. Conclusions: Ag2ONP-functionalized HEPA filters and colloidal Ag2ONP suspensions effectively prevent biofilm formation by major respiratory pathogens, for both Gram-negative and Gram-positive bacteria. These materials show promise for integration with air filtration and surface coating systems to reduce microbial load and transmission in healthcare environments such as operating room facilities.