Huarui Hu

Dr. Huarui Hu


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2025 in Physics of Fluids
Verified
Journal Article
Closed access
HHHuarui Hu
Huarui Hu
ZWZepeng Wang
Zepeng Wang
MWMengting Wang
Mengting Wang
MZMengru Zeng
Mengru Zeng
CLChenguang Liu
Chenguang Liu
HCHaowen Chen
Haowen Chen
In order to investigate the impact of fracturing fluid invasion on the mechanical degradation of deep coal, coal samples treated with five promising fracturing fluids were used for true triaxial compression tests in deep conditions. Due to water–rock reactions, lubrication, and the water wedge effect, the compressive strength of coal samples decreased. The decrease was most significant for coal samples treated with hydrofluoric (HF). The total energy and elastic strain energy of the coal samples first increased and then decreased. In contrast, the dissipation energy increased gradually, and the energy dissipation ratio exhibited a U-shape, decreasing initially and then increasing, with a turning point at the peak strain. However, the inflection point was delayed to varying degrees following treatment with viscoelastic surfactant fracturing fluid (VESFF) and acidic fracturing fluid (AFF), with the delay being more pronounced for AFF. The coal samples treated with anionic VESFF and hydrochloric acid exhibited the highest peaks of total energy and elastic strain energy, along with the fastest growth rate of dissipated energy and the most rapid decrease in the energy dissipation ratio, whereas the coal samples treated with HF exhibited the opposite behavior. All coal samples primarily exhibited shear damage, with a small number of tensile cracks appearing near the shear surface in the VESFF-treated coal samples. The coal samples treated with two types of AFF exhibited shear-tensile composite damage, while the HF-treated coal samples displayed X-shaped cracks. In summary, VESFF holds significant potential for future applications in the development of deep ECBM.

1 September 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
JZJingwei Zheng
Jingwei Zheng
HHHuarui Hu
Huarui Hu
CCCancan Chen
Cancan Chen
XZXiang Zhang
Xiang Zhang
CLChengtian Li
Chengtian Li
The deep coal seam is the ideal place for CO2 geological storage, and its permeability is the key index to evaluate the geological storage ability. In this study, permeability tests on coal samples under triaxial stress were conducted. Combined with nuclear magnetic resonance and x-ray diffraction tests, the physical modification mechanism of coal sample under the action of water–CO2 and its effect on permeability were discussed. The results indicate that, due to effective stress and adsorption expansion, the internal pores of the coal samples are compressed and closed, resulting in narrower seepage channels. Under varying effective stress conditions, the permeability of coal samples with different moisture contents decreases before CO2 adsorption, after CO2 adsorption, and after CO2 desorption, as moisture content increases. However, due to competitive adsorption between water and CO2, the permeability of coal samples after CO2 injection is lower than that before injection. Under the combined effects of water and CO2, the coal matrix experiences complex interactions leading to mineral dissolution, precipitation accumulation, and changes in the composition and pore structure of the coal samples. After CO2 desorption, the permeability of coal samples exhibits an “M”-shaped change with increasing moisture content. The permeability of samples with 5.6% moisture content was lower than that before CO2 injection, whereas the permeability of other samples increased. The sample with moisture content of 2.8% showed the highest permeability, with the largest proportion of mesopores and macropores providing seepage channels. In contrast, the sample with moisture content of 5.6% had a reduced macropore volume proportion, making macropores the dominant factor in permeability. Based on these findings, a permeability model for coal samples was derived and its accuracy verified. The study reveals the influence mechanism of adsorption expansion, effective stress, and moisture content on the permeability of coal samples.

20 May 2026 in Rock Mechanics and Rock Engineering
Verified
Journal Article
Closed access
PDF file
ZWZepeng Wang
Zepeng Wang
CHChen Haowen
Chen Haowen
KCKang Changhao
Kang Changhao
HHHuarui Hu
Huarui Hu
LCLiu Chenguang
Liu Chenguang
ZLZhang Liang
Zhang Liang

1 May 2026 in AIP Advances
Verified
Journal Article
Open access
YLYafei Luo
Yafei Luo
ZZZhangkai Zheng
Zhangkai Zheng
HHHuarui Hu
Huarui Hu
QLQiangwei Lin
Qiangwei Lin
FHFei Huang
Fei Huang
PWPengfei Wang
Pengfei Wang
Inorganic mineral pores in coal are highly effective conduits for the transport of methane and water but are primary sites for water blocking. Current research on methane/water two-phase flow in coal focuses on pores in organic matter, and few studies have been performed on inorganic mineral pores. Inorganic materials are typically hydrophilic, making it essential to investigate the distribution and transport of two-phase flow in inorganic mineral nanofluidic channels. In this study, a nanoscale kaolinite slit model was constructed using results from scanning electron microscopy and energy dispersive spectroscopy Molecular dynamics simulations were conducted on methane and water in the model. The influence of water saturation, pressure differential, and pore size on two-phase flow was systematically analyzed. Water molecules preferentially adsorb onto the surface of kaolinite channels. With increasing water saturation, the water molecules order into various structures, such as films, bridges, and locks. The presence of water substantially reduces the space available for methane flow. As the water saturation increases, for methane, the peak density near the channel walls decreases, the distribution gradually becomes parabolic, and the flow rate decreases considerably (particularly for 0–45% water saturation). At 45% water saturation, the methane flow rate is 69.46% lower than that for single-phase methane flow. Both the water and methane flow rates increase with the pore size, but the effect is stronger for water than for methane. These findings provide valuable insights into the underlying mechanisms of water blockage and could make production performance prediction more accurate.

1 January 2026 in Physics of Fluids
Verified
Journal Article
Closed access
HHHuarui Hu
Huarui Hu
ZWZepeng Wang
Zepeng Wang
MWMengting Wang
Mengting Wang
MZMengru Zeng
Mengru Zeng
CLChenguang Liu
Chenguang Liu
HCHaowen Chen
Haowen Chen