William G Davids

Prof. William G Davids

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2015 in Construction and Building Materials
Verified
Journal Article
Closed access
HLHannah B. Loring
Hannah B. Loring
WDWilliam G Davids
William G Davids

29 September 2023 in Materials
Verified
Journal Article
Open access
PDF file
FPFelipe Robles Poblete
Felipe Robles Poblete
MIMatthew Ireland
Matthew Ireland
LSLucinda Slattery
Lucinda Slattery
WDWilliam G Davids
William G Davids
Roberto A Lopez-AnidoRoberto A Lopez-Anido
Roberto A Lopez-Anido
This work focuses on simulating the thermal history of a vertical wall consisting of a thermoplastic composite material, poly(ethylene terephthalate) glycol (PETG) with short carbon fiber reinforcement, manufactured using a Big Area Additive Manufacturing (BAAM) system. The incremental deposition process used in additive manufacturing, which corresponds to the repeated deposition of hot material onto cooler material, contributes to the presence of residual stresses and part warping. The prediction of these mechanisms is dependent on thermal history of the part, and the major motivation of this work was to improve the accuracy of finite element (FE) models used to quantify the thermal history of large-format additively manufactured parts. Thermocouples were placed throughout the part at varying heights to measure temperature as a function of time. The FE model developed found a thermal contact conductance between the printed part and the bed of 10 W/m2K and convection coefficient values that linearly varied from 3 to 15 W/m2K through the wall height when making a temperature comparison with the output from the thermocouples. It is also demonstrated that the FE model with a constant convection coefficient under-predicts model temperature at the beginning of the manufacturing process when compared against the model with a variable convection coefficient. The impact of this difference was seen in the stress values, which were larger for the model with a constant convection coefficient. Finally, a correlation equation was derived which allows the findings to be generalized to other vertical structures manufactured on the BAAM. In summary, this work offers valuable insights on material characterization, real-time thermocouple placement, and FE modeling of large-format additively manufactured parts.

21 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
WDWilliam G Davids
William G Davids
DGDante Guzzi
Dante Guzzi
ASAndrew Philip Schanck
Andrew Philip Schanck
This paper details the development and experimental assessment of a friction-type connector, designed to transfer shear flow between the top flange of a fiber-reinforced polymer (FRP) tub girder and a composite concrete deck for bridge applications. In contrast with previously used bearing-type connectors, this system relies on a deformed FRP surface to transfer shear via direct interlock with the concrete deck. The connector is materially efficient, simple to fabricate, can be used with lower-grade structural or stainless-steel fasteners, and provides a high degree of interface stiffness. Six compression-shear specimens were tested to assess the connector fatigue resistance and ultimate connection strength. Additionally, two short beam specimens were tested in three-point bending, one of which was subjected to fatigue loading. Based on the compression-shear tests and short beam tests, the connection exhibited strength exceeding that predicted by AASHTO for frictional concrete-concrete connections. The connection strengths were significantly greater than the factored demand required by AASHTO for a typical model FRP bridge girder. The cyclic loading of the connection in both compression-shear and beam bending showed that connection stiffness and strength do not significantly degrade, due to the application of 1 × 106 to 6 × 106 cycles of traffic-induced factored fatigue load.

1 February 2020 in Structures
Verified
Journal Article
Closed access
ASAndrew Philip Schanck
Andrew Philip Schanck
WDWilliam G Davids
William G Davids

1 September 2016 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
HWHarold J. Walton
Harold J. Walton
WDWilliam G Davids
William G Davids
MLMelissa E. Landon
Melissa E. Landon
JCJoshua D. Clapp
Joshua D. Clapp
In this study, soil–structure interaction in a buried arch bridge system is numerically investigated with two models. Model predictions of arch bending moments and ultimate capacities are compared with the load test performance results of two buried structures from a companion paper. A novel finite-element model was developed using an arch discretized with beam elements and soil discretized with spring elements initialized during progressive backfill simulation. Nonlinear soil-spring force is determined from vertical overburden pressure and earth pressure coefficient dependent on arch deflection. A nonlinear soil-continuum finite-element model was developed using software with Mohr-Coulomb soil plasticity. Experimental moments are compared with model results for backfilling, a series of service-level line loads, and ultimate capacity with an apex line load. The soil-spring model does reasonably well at predicting arch moments and ultimate capacity, and the incorporation of deflection-dependent ear...

Verified
Journal Article
Open access
PDF file
JCJacob Christopher Clark
Jacob Christopher Clark
WDWilliam G Davids
William G Davids
Roberto A Lopez-AnidoRoberto A Lopez-Anido
Roberto A Lopez-Anido
ASAndrew Philip Schanck
Andrew Philip Schanck
CSCody Alexander Sheltra
Cody Alexander Sheltra
Despite the strength and ductility of steel reinforcing bars, their susceptibility to corrosion can limit the long-term durability of reinforced concrete structures. Fiber-reinforced polymer (FRP) reinforcing bars made with a thermosetting matrix offer corrosion resistance but cannot be field-bent, which limits flexibility during construction. FRP reinforcing bars made with fiber-reinforced thermoplastic polymers (FRTP) address this limitation; however, their high processing viscosity presents manufacturing challenges. In this study, the Continuous Forming Machine, a novel pultrusion device that uses pre-consolidated fiber-reinforced thermoplastic tapes as feedstock, is described and used to fabricate 12.7 mm nominal diameter thermoplastic composite rebars. Simple bend tests on FRTP rebar that rely on basic equipment are performed to verify its ability to be field-formed. The manual bending technique demonstrated here is practical and straightforward, although it does result in some fiber misalignment. Subsequently, surface deformations are introduced to the rebar to promote mechanical bonding with concrete, and tensile tests of the bars are conducted to determine their mechanical properties. Finally, flexural tests of simply-supported, 6 m long beams reinforced with FRTP rebar are performed to assess their strength and stiffness as well as the practicality of using FRTP rebar. The beam tests demonstrated the prototype FRTP rebar’s potential for reinforcing concrete beams, and the beam load–deformation response and capacity agree well with predictions developed using conventional structural analysis principles. Overall, the results of the research reported indicate that thermoplastic rebars manufactured via the Continuous Forming Machine are a promising alternative to both steel and conventional thermoset composite rebar. However, both the beam and tension test results indicate that improvements in material properties, especially elastic modulus, are necessary to meet the requirements of current FRP rebar specifications.