Doping engineering of metallic elements is of significant importance in photocatalysis, especially in the transition element range where metals possess empty ‘d’ orbitals that readily absorb electrons and increase carrier concentration. The doping of Mn ions produces dipole interactions that change the local structure of BiOCl, thus increasing the specific surface area of BiOCl and the number of mesoporous distributions, and providing a broader platform and richer surface active sites for catalytic reactions. The combination of Mn doping and metal Bi reduces the forbidden bandwidth of BiOCl, thereby increasing the absorption in the light region and strengthening the photocatalytic ability of BiOCl. The degradation of norfloxacin by Bi/Mn-doped BiOCl can reach 86.5% within 10 min. The synergistic effect of Mn doping and Bi metal can change the internal energy level and increase light absorption simultaneously. The photocatalytic system created by such a dual-technology combination has promising applications in environmental remediation.

Interface engineering is usually considered to be an efficient strategy to promote the separation and migration of photoexcited electron-hole pairs and improve photocatalytic performance. Herein, reduced graphene oxide/mesoporous titanium dioxide nanotube heterojunction assemblies (rGO/TiO₂) are fabricated via a facile hydrothermal method. The rGO is anchored on the surface of TiO₂ nanosheet assembled nanotubes in a tightly manner due to the laminated effect, in which the formed heterojunction interface becomes efficient charge transfer channels to boost the photocatalytic performance. The resultant rGO/TiO₂ heterojunction assemblies extend the photoresponse to the visible light region and exhibit an excellent photocatalytic hydrogen production rate of 932.9 μmol h⁻¹ g⁻¹ under simulated sunlight (AM 1.5G), which is much higher than that of pristine TiO₂ nanotubes (768.4 μmol h⁻¹ g⁻¹). The enhancement can be ascribed to the formation of a heterojunction assembly, establishing effective charge transfer channels and favoring spatial charge separation, the introduced rGO acting as an electron acceptor and the two-dimensional mesoporous nanosheets structure supplying a large surface area and adequate surface active sites. This heterojunction assembly will have potential applications in energy fields.

Photocatalytic elimination of antibiotics from the environment and drinking water is of great significance for human health. However, the efficiency of photoremoval of antibiotics such as tetracycline is severely limited by the prompt recombination of electron holes and slow charge migration efficacy. Fabrication of low-dimensional heterojunction composites is an efficient method for shortening charge carrier migration distance and enhancing charge transfer efficiency. Herein, 2D/2D mesoporous WO₃/CeO₂ laminated Z-scheme heterojunctions were successfully prepared using a two-step hydrothermal process. The mesoporous structure of the composites was proved by nitrogen sorption isotherms, in which sorption-desorption hysteresis was observed. The intimate contact and charge transfer mechanism between WO₃ nanoplates and CeO₂ nanosheets was investigated using high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy measurements, respectively. Photocatalytic tetracycline degradation efficiency was noticeably promoted by the formation of 2D/2D laminated heterojunctions. The improved photocatalytic activity could be attributed to the formation of Z-scheme laminated heterostructure and 2D morphology favoring spatial charge separation, confirmed by various characterizations. The optimized 5WO₃/CeO₂ (5 wt.% WO₃) composites can degrade more than 99% of tetracycline in 80 min, achieving a peak TC photodegradation efficiency of 0.0482 min⁻¹, which is approximately 3.4 times that of pristine CeO₂. A Z-scheme mechanism is proposed for photocatalytic tetracycline by from WO₃/CeO₂ Z-scheme laminated heterojunctions based on the experimental results.

Photocatalysis is the most promising green approach to solve antibiotic pollution in water, but the actual treatment effect is limited by photocatalytic activity. Herein, Bi and BiOCl were loaded onto the surface of Ce-MOF (metal–organic framework) using an electrostatic adsorption method, and a special ternary heterojunction of Ce/Bi/BiOCl was successfully prepared as a photocatalyst for the degradation of tetracycline (TC). FTIR demonstrated that the obtained photocatalyst contains functional groups such as -COOH belonging to Ce-MOF and characteristic crystal planes of Bi and BiOCl, indicating the successful construction of a ternary photocatalyst. The results of UV–vis absorption spectra confirm that the band gap of Ce/Bi/BiOCl heterojunction is reduced from 3.35 eV to 2.7 eV, resulting in an enhanced light absorption capability in the visible light region. The special ternary heterojunction constructed by Ce-MOF, Bi, and BiOCl could achieve a narrow band gap and reasonable band structure, thereby enhancing the separation of photogenerated charges. Consequently, the photocatalytic performance of the Ce/Bi/BiOCl ternary heterojunction was significantly enhanced compared to Ce-MOF, Bi, and BiOCl. Therefore, Ce/Bi/BiOCl can achieve a photocatalytic degradation rate of 97.7% within 20 min, which is much better than Bi (14.8%) and BiOCl (67.9%). This work successfully constructed MOF-based ternary photocatalysts and revealed the relationship between ternary heterojunctions and photocatalytic activity. This provides inspiration for constructing other heterogeneous catalysts for use in the field of photocatalysis.