The heat enhancement in hybrid nanofluid flow through the peristaltic mechanism has received great attention due to its occurrence in many engineering and biomedical systems, such as flow through canals, the cavity flow model and biomedicine. Therefore, the aim of the current study was to discuss the hybrid nanofluid flow in a symmetric peristaltic channel with diverse effects, such as electromagnetohydrodynamics (EMHD), activation energy, gyrotactic microorganisms and solar radiation. The equations governing this motion were simplified under the approximations of a low Reynolds number (LRN), a long wavelength (LWL) and Debye–Hückel linearization (DHL). The numerical solutions for the non-dimensional system of equations were tackled using the computational software Mathematica. The influences of diverse physical parameters on the flow and thermal characteristics were computed through pictorial interpretations. It was concluded from the results that the thermophoresis parameter and Grashof number increased the hybrid nanofluid velocity near the right wall. The nanoparticle temperature decreased with the radiation parameter and Schmidt number. The activation energy and radiation enhanced the nanoparticle volume fraction, and motile microorganisms decreased with an increase in the Peclet number and Schmidt number. The applications of the current investigation include chyme flow in the gastrointestinal tract, the control of blood flow during surgery by altering the magnetic field and novel drug delivery systems in pharmacological engineering.

There is no denying fact that nanoparticles of carbon nanotubes are employed to improve the performance of thermal stability in comparison with traditional nanoparticles, this is because nanoparticles of carbon nanotubes possess outstanding material properties. In this manuscript, a mathematical model of mixed convective flow based on carbon nanotubes suspended in ethylene glycol has been developed and derived by means of Fourier Sine transform. In order to analyze the thermophysical properties of nanofluid, the temperature and velocity profiles have been investigated through fractional derivative and integral transforms. The comparative analysis of single and multi-walled carbon nanotubes has been presented for the sake of enhancement of heat transfer. It is worth mentioning that embedded rheological parameters have shown the sensitivity for the enhancement of heat transfer with and without fractional techniques through graphical illustration.

The development and study of Na ion batteries are expanding. This study employs the hydrothermal technique to produce single-phase, well-crystallized, fluorine-added O₃-type NaFe_1-xMg_xO₂. Using XRD, FESEM, and HRTEM, the sample’s phase structure and morphological information were characterized. Initially, without adding fluorine the electrode suffers from poor stability at high voltage ranges and also during long-term cycling. So, fluorine was added to the structure and the electrochemical performance of the material was greatly increased. The electrochemical performance of O₃-type positive electrode materials for rechargeable Na ion batteries is evaluated. The capacity of fluorine-added O₃-type NaFe1-xMgxO₂ is approximately 163 mAh g⁻¹ (50 mA g⁻¹). Adding fluorine to the host structure increases the stability of the electrode, leading to improved electrochemical performance during long-term cycling. The electrochemical results indicate that fluorine-added O₃-type NaFe_1-xMg_xO₂ cathode material for cost-effective and environmentally friendly sodium-ion batteries is promising. Fluorine-based electrodes will be a future for Na ion energy storage devices

The key issue in the practical implementation of the sliding mode (SM) control–based power inverter is the variable switching frequency. This variable switching frequency not only induces electromagnetic interference (EMI) noise, but also reduces the efficiency of the inverter, as the size of the inductor and capacitor does not alter in tandem with this variable frequency. In this context, fixed switching frequency–based SM control techniques are proposed; however, some of them are too complex, while others compromise the inherent properties of SM control. In this research, a fixed frequency SM controller is proposed, which is based on the novel low-pass filter extraction of the discontinuous control signal. This allows the technique to be implemented with fewer hardware components, thus reducing the complications of implementation, while maintaining the robustness and parametric invariance of SM control. A simulation-based comparison with an existing pulse width modulated (PWM) SM controller is presented as the benchmark. In comparison with the sigmoid function SM controller, an improvement of 50% in the settling time along with zero steady-state errors and a further 37% and 42% improvement in the undershoot and overshoot, respectively, is reported in the simulation. A hardware setup is established to validate the proposed technique, which substantiates the simulation results and its disturbance rejection properties.

The advantages offered by DC microgrids, such as elimination of skin effect losses, no requirement of frequency synchronization and high efficiency for power transmission are the major reasons that microgrids have attracted the attention of researchers in the last decade. Moreover, the DC friendly nature of renewable energy resources makes them a perfect choice for integration with DC microgrids, resulting in increased reliability and improved stability. However, in order to integrate renewable energy resources with the DC microgrids, challenges like equal load sharing and voltage regulation of the busbar under diverse varying load conditions are to be addressed. Conventionally, droop control with PI compensation is used to serve this purpose. However, this cascaded scheme results in poor regulation to large load variations and steady state errors. To address this issue, this paper presents a sliding mode control-based approach. Key features of SMC are its ease of implementation, robustness to load variations, and fast dynamic response. The system model is derived and simulated to analyze the stability and performance of the proposed controller. An experimental test bench is developed to demonstrate the effectiveness of SMC against modeled dynamics and is compared with the droop controller. The results show an improvement of $26\%$ and $27.4\%$ in the rise time and settling time, respectively. Robustness of the proposed scheme is also tested by switching it with a step load and an improvement of $40\%$ has been observed.

Fuel cells guarantee ecological ways of electricity production by promising zero emissions. Proton exchange membrane fuel cells (PEMFCs) are considered one of the safest methods, with a low operating temperature and maximum conversion efficiency. In order to harness the full potential of PEMFC, it is imperative to ensure the membrane’s safety through appropriate control strategies. However, most of the strategies focus on fuel economy along with viable fuel cell life, but they do not assure constant output voltage characteristics. A comprehensive design to regulate and boost the output voltages of PEMFC under varying load conditions is addressed with dynamic integral sliding mode control (DISMC) by combining the properties of both the dynamic and integral SMC. The proposed system outperforms in robustness against parametric uncertainties and eliminates the reaching phase along with assured stability. A hardware test rig consisting of a portable PEMFC is connected to the power converter using the proposed technique that regulates voltage for varying loads and power conditions. The results are compared with a proportional integral (PI) based system. Both simulation and hardware results are provided to validate the proposed technique. The experimental results show improvements of $35.4\%$, $34\%$ and $50\%$ in the rise time, settling time and robustness, respectively.