Organic matter burial in the deep-sea fan sediments is an important component of the long-term carbon cycle. Although there is increasing recognition of the importance of organic matter in deep-sea sediments, a major focus has been on mudstones, commonly interpreted as the background sediments, deposited by pelagic or hemipelagic vertical suspension fallout in low-energy fan environments. Emerging evidence suggests that relatively coarse-grained sediment gravity flow deposits (e.g., turbidites and hybrid event beds) can also store a significant quantity of organic carbon, implying that a wide range of depositional processes can result in the concentration and enrichment of organic matter in submarine fans. However, the role of these processes on carbon burial is still not fully understood. This review aims to discuss the impact of three widely documented deep-sea depositional mechanisms/processes, namely vertical suspension settling, grain-by-grain (incremental aggradation), and the en-masse deposition on distribution, burial, and preservation of organic matter in deep-marine deposits. Organic matter accumulated from slowly settling suspension in mud caps (Te or H5 divisions of turbidites and hybrid beds, respectively) is prone to higher oxidation compared to the carbon buried in sandy components of turbidity currents (Ta-Tc units) and hybrid beds (H2/H3 divisions). The burial of organic matter in sandy parts of the deposits has important implications for understanding the fundamental physical processes that control carbon accumulation and preservation in deep-marine rock record.
In this paper, we investigate the effect of magnetic field strength on the transverse relaxation time constant (T2) in six distinct core plugs from four different rock types (three sandstones, one basalt, one volcanic tuff and one siltstone), retrieved from offshore Ireland. The CPMG pulse-sequence was used at two different magnetic field strengths: high-field at 4.70 T and low-field at 0.28 T. Axial images of the core plugs were also acquired with the RAREst sequence at high magnetic field strength. Thin-sections of the core plugs were prepared for optical imaging and SEM analysis, and provided qualitative information on the porosity and quantification of the elemental composition of the rock material. The content of iron varied from 4 wt. % to close to zero in the rock samples. Nevertheless, the effective T2 distributions obtained at low-field were used to successfully predict the porosity of the core plugs. Severe signal attenuations from internal magnetic gradients resulted in an underestimation of the porosity at high-field. No definitive trend was identified on the evolution of discrete relaxation time components between magnetic field strengths. The low-field measurements demonstrate that NMR is a powerful quantitative tool for petrophysical rock analysis as compared to thin-section analysis. The results of this study are of interest to the research community who characterizes natural gas hydrates in tight heterogeneous core plugs, and who typically relies on MR imaging to distinguish between solid hydrates and fluid phases. It further exemplifies the importance of selecting appropriate magnetic field strengths when employing NMR/MRI for porosity calculation in tight rock.
Clastic reservoir core is routinely characterized using conventional, destructive spot sampling techniques. Whilst spot sampling provides useful textural and compositional information, the samples are typically widely spaced (∼ 25 cm), and hence continuous variation in rock composition/texture is not fully captured. It is therefore important to develop higher-resolution rock characterization techniques. In this paper, compositional data from a micro x-ray fluorescence (µXRF) scanner (hereafter Itrax) was used to demonstrate near-continuous (at 200 µm resolution) mineralogical variations in an ancient sandstone core. Traditionally, Itrax was used for compositional profiling of soft sediment cores, with limited use of this technology with rock cores. The acquired XRF data reveal subtle but systematic vertical compositional/textural trends, that may reflect distribution of major sandstone forming mineral grains, clay minerals, diagenetic carbonate cements and identification of new textural subdivisions in sandstones, which would not otherwise be seen with conventional plug analysis, implying the importance of high-resolution core scanning techniques for continuous measurement of mineralogy in clastic reservoirs.•Limited literature could be found whereby the capability of Itrax scanning has been extended to ancient, clastic cores.•Itrax is a non-destructive technique, where elemental composition is obtained directly at the surface of a split core at resolution significantly higher than conventional plug based techniques.•Itrax data acquisition is a quick process (few hours) and mineral distribution trends can be used as guide for further specialized sampling and detailed investigation of clastic reservoirs.