Significant potential for acoustic metamaterials to provide a breakthrough in sound attenuation has been unlocked in recent times due to advancements in additive manufacturing techniques. These materials allow the targeting of specific frequencies for sound attenuation. To date, acoustic metamaterials have not been demonstrated in a commercial automotive silencer for performance enhancement. A significant obstacle to the practical use of acoustic metamaterials is the need for low cost and efficient modelling strategies in the design phase. This study investigates the effect of acoustic metamaterials within a representative automotive silencer. The acoustic metamaterial design is achieved using a combination of analytical and finite element models, validated by experiment. The acoustic metamaterial is then compared with commonly used techniques in the silencer industry to gauge the effectiveness of the acoustic metamaterials. COMSOL simulations were used to validate the developed test rig and were compared to experimental results which were obtained using the two-load transmission loss test method. Through this testing method, the implementation of a labyrinthine metamaterial cylinder proved to be a significant improvement in transmission loss within the silencer, with an increase in transmission loss of 40 dB at 1500 Hz. The research has successfully shown that acoustic metamaterials can be used in practical settings, such as an automotive silencer, to improve the overall sound attenuating performance. The described analytical model demonstrates the potential for industrially relevant low cost design tools.
10 September 2020 in International Journal of Aeroacoustics
The sound absorptive performance of a proposed “meta-liner” are investigated in this paper. The structure is composed of closely placed plates connected by openings at alternating locations in a stacked format. This system presents multiple band gaps with high absorption and sub-wavelength behaviour (sample thickness equals 0.04λ), achieved through tortuosity within the design. The acoustic response of the single layer is obtained numerically and with experimental verification under normal incidence. The repeating cellular design allows efficiencies in the viscothermal numerical analysis and using a transfer matrix approach, it is demonstrated that the response of the overall system may be efficiently predicted from a detailed model of a unit cell. Both the transfer matrix method and a full viscothermal model are validated against experimental data as a function of system depth. The analysis gives very satisfactory results which could form the basis for future designs.