In this work a plasmonic sensor with a D-Shaped microstructured optical fiber $\left(\mathrm{MOF}\right)$ is proposed to detect a wide range of analyte refractive index $\left(\mathrm{RI} ;{\mathrm{n}}_{\mathrm{a}}\right)$ by doping the pure silica $\left({\mathrm{SiO}}_2\right)$ core with distinct concentrations of Germanium Dioxide $\left({\mathrm{GeO}}_2\right)$, causing the presentation of high spectral sensitivity. In this case, the fiber is shaped by polishing a coating of ${\mathrm{SiO}}_2$, on the region that will be doped with ${\mathrm{GeO}}_2$, in the polished area, a thin gold $\left(\mathrm{Au}\right)$ layer, which constitutes the plasmonic material, is introduced, followed by the analyte, in a way which the gold layer is deposited between the ${\mathrm{SiO}}_2$. and the analyte. The numerical results obtained in the study shows that the sensor can determine efficiently a range of 0.13 refractive index units $\left(\mathrm{RIU}\right)$, with a limit operation where ${\mathrm{n}}_{\mathrm{a}}$ varies from 1.32 to 1.45. Within this application, the sensor has reached an average wavelength sensitivity $\left(\mathrm{WS}\right)$ of up to $11,650.63 \mathrm{nm}/\mathrm{RIU}$. With this level of sensitivity, the D-Shaped format and wide range of ${\mathrm{n}}_{\mathrm{a}}$ detection, the proposed fiber has great potential for sensing applications in several areas.

In this paper, a microstrip patch antenna (MPA) design was developed to verify the performance of a metamaterial cell array (MTM) Capacitive Loaded Loop (CLL) immersed in the substrate. The metamaterial was obtained from metal laminates designed inside a dielectric material, with dimensions carefully calculated to have the effective negative permittivity and permeability, consequently the negative refractive index, in a certain frequency range. In this case, the geometric control of the unit cell parameters allowed its organization in a periodic arrangement to be immersed in the MPA substrate. Simulated and experimental results were obtained and compared for some parameters of the antenna, which showed a good relationship between MTM and MPA performance.

Surface Plasmon Polaritons (SPPs) are evanescent surface electromagnetic waves that propagate along a dielectric-metal interface. They allow propagating modes in waveguides with dimensions smaller than the diffraction limit. By arranging slits of different widths along a metallic film, it is possible to design plasmonic lenses through phase modulation at the slits output. The distance of energy concentration, obtained by these lenses, its called focus and is of the order of one wavelength (λ). Lenses of this type allow light coming from a micrometric waveguide, such as optical fibers, for example, to be coupled to structures such as nanometric waveguides, at short distances, reducing considerably the coupling area. In this work, by using the Finite Element Method (FEM) was simulated the energy coupling between a light source and a plasmonic waveguide using plasmonic lens operating at wavelengths of 650 nm.

In this study, a rib waveguide is used in the design of a plasmonic sensor. The structure consists of a dielectric substrate constituted of tantalum pentoxide (Ta₂O₅). On top of this substrate, a superstrate with a ridge, composed of niobium pentoxide (Nb₂O₅), is overlayed forming the guiding region. A thin sheet of graphene is placed over the Nb₂O₅ and below the analysis region, where concentrations of dimethyl sulfoxide (DMSO) ranging from 50% to 100% will be detected. The purpose of incorporating the graphene sheet is to induce the effect of localized surface plasmon resonance (LSPR), which in this configuration becomes sensitive to variations in the refractive index (RI) of DMSO. The surface plasmons in graphene (graphene-SP) are induced by collective oscillations of charge carriers, i.e., free electrons in graphene, which, when subjected to specific frequencies, couple with the electromagnetic fields at the interface between graphene and the dielectric. The basic principle is similar to that of surface plasmons in noble metals,however, surface plasmons in graphene can occur at lower frequencies. With this configuration, a plasmonic sensor is obtained to detect DMSO concentrations, designed for a wavelength of 0.6329 micrometers.

Resumo-Este artigo propõe o estudo de uma fibra óptica composta por sílica fundida com furos de ar elípticos, distribuídos quase periodicamente segundo o mosaico de Penrose. A geometria resultante forma uma fibra de quase cristal fotônico (PQCF), operando em 1,55 µm. Dois cenários estruturais foram analisados: no primeiro, os furos apresentam eixo horizontal maior; no segundo, eixo vertical maior. Os resultados indicam confinamento eficiente do campo eletromagnético em ambos os casos. Contudo, para a polarização em x, a segunda configuração apresentou maior concentração de campo. Foram analisadas distribuições unidimensionais e bidimensionais do campo elétrico, além das perdas por confinamento.