In this paper, a microstrip patch antenna (MPA) design was developed to verify the performance of a metamaterial cell array (MTM) Capacitive Loaded Loop (CLL) immersed in the substrate. The metamaterial was obtained from metal laminates designed inside a dielectric material, with dimensions carefully calculated to have the effective negative permittivity and permeability, consequently the negative refractive index, in a certain frequency range. In this case, the geometric control of the unit cell parameters allowed its organization in a periodic arrangement to be immersed in the MPA substrate. Simulated and experimental results were obtained and compared for some parameters of the antenna, which showed a good relationship between MTM and MPA performance.
1 May 2021 in Microwave and Optical Technology Letters
In this article, a circular patch microstrip antenna with a metamaterial resonator for 4G applications is proposed. For the design of the circular antenna patch, an approximate calculation was performed. The circular resonator is inserted into the patch for some antennas, in different positions for a parametric study. When incorporating the resonator, the performance of the antenna is improved and analyzed through some parameters, when compared with the antenna without the resonator. To verify the influence of the resonator and validate its performance, simulated results were performed with the ANSYS HFSS® software and compared with the experimental results, through prototypes, in which they showed a good agreement.
2 January 2023 in The Journal of Engineering and Exact Sciences
Neste trabalho, uma antena de microfita para operar na frequência de 5,8 GHz é proposta com arranjos de células metamateriais (MTMs) metálicos para melhorar o seu desempenho através de um aprimoramento dos campos. Para isso, um arranjo de células do tipo Capacitive Loaded Loop (CLL) é inserido dentro do substrato da antena, sendo distribuído em forma de uma matriz de 5 × 7 elementos ressoadores. O arranjo na antena foi proposto e analisado nas posições de 0º e 90º. Verificou-se que os elementos metamateriais ressoadores são responsáveis por um melhor desempenho das antenas em alguns parâmetros em relação a antena de microfita padrão, ou seja, houve um aumento da largura de banda em 21,43%, e um menor coeficiente de reflexão em 27,37% na posição 0º. Para posição de 90º houve somente um aumento na largura de banda de 19,24%. Além disso, foi possível observar que é possível trabalhar com frequências menores em função da larga faixa de frequências nas posições analisadas possibilitando uma redução no tamanho da antena de microfita padrão.