In this article, analytical solutions of piezoelectric bimorph and unimorph actuator in cantilever configurations are developed using the second-order constitutive equation. Tip deflection ratio (TDR), a dimensionless parameter, is defined to analyze the effect of second-order coefficients of piezoelectric materials on the response of bimorph and unimorph actuators. Four piezoelectric unimorphs of varying geometries are fabricated and tested to verify the nonlinear response under applied electric field. Furthermore, second-order coefficients of lead zirconate titanate (PZT; APC 850) are derived by fitting the experimental data with nonlinear analytical solution. The nonlinear response of all the piezoelectric unimorphs compares well with the experimental results.
In this paper shape control optimization of piezoelectric bimorph is done by piezo response function (PRF) and global optimization technique. PRF is used to formulate the optimization problem and global optimization algorithm is used to minimize the error between the target and the achieved shape. The performance of four global optimization techniques, simulated annealing (SA), genetic algorithm, particle swarm optimization and teacher learning based optimization are compared for the shape control of piezoelectric bimorph. 28 piezoelectric actuators are used in the piezoelectric bimorph to generate the sinusoidal profile, elliptical profile and arbitrary deformation profile by the external load. PRF is calculated by solving finite element model of piezoelectric bimorph and, optimization of electric potential with safety limit is done to achieve the target profiles by using all the aforementioned optimization techniques. SA gives best value of the objective function. At optimum electrode potential, the target and, achieved sinusoidal, elliptical and arbitrary deformation profiles obtained by SA at 5 × 10 7 computation, matches closely with root mean square (RMS) errors of 0.72, 12.18 and 28.86 nm, respectively. Subsequently, a robust and fully reproducible method for the shape control of piezo actuated deformable mirrors and smart structures is developed.
In this work, we report the development and characterization of an atom chip for magnetic trapping of cold atoms. For fabrication of the atom chip, a silicon substrate was used after depositing an insulating layer of silica ( ) on it. An adhesive chromium layer was further deposited on this substrate before the deposition of the final layer of gold. On this gold coated substrate, a z-shaped gold wire (cross section, ) was fabricated by a photo-chemical machining method. The chip wire was tested for current–voltage characteristics for its reliable operation in magnetic trapping. The atoms from an U-magneto-optical trap, after optical pumping, were directly trapped in the magnetic trap of the atom chip.
Finite element methods (FEMs) are more advantageous for analyzing complex geometry and structures than analytical methods. Local search optimization techniques are suitable for the unimodal problem because final result depends on the starting point. On the other hand, to optimize the parameters of multi-minima/maxima problems, global optimization-based FEM is used. Unfortunately, global optimization solvers are not present in, COMSOL Multiphysics, a versatile tool for solving varieties of problems using FEM. Teaching–learning-based optimization (TLBO) is a global optimization technique and does not require any algorithm-specific parameter. In this paper, FEM is coupled with TLBO algorithms in COMSOL Multiphysics for solving the global optimization problem. The TLBO algorithm is implemented in COMSOL Multiphysics using the JAVA application programming interface and tested with the standard benchmark functions. The solutions of the standard benchmark problem in COMSOL Multiphysics are in close agreement with the results presented in literature. Furthermore, the optimization procedure thus established is used for the optimization of actuator voltage for piezoelectric bimorphs to achieve the desired shapes. The FEM-based TLBO method is compared with two optimization methods present in COMSOL Multiphysics for a shape control problem; (i) method of moving asymptotes (MMA) and (ii) Bound Optimization BY Quadratic Approximation (BOBYQA). The root mean square error shows that the FEM-based TLBO algorithm converges to a global minimum and gives the same result (19.3 nm) at multiple runs, whereas MMA and BOBYQA trapped in local minimum and gave different results for different starting points.