Syarfa Zahirah Sapuan

Syarfa Zahirah Sapuan


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 June 2022 in Electronics
Verified
Journal Article
Open access
PDF file
ABDULRAHMAN A. G AMERABDULRAHMAN A. G AMER
ABDULRAHMAN A. G AMER
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
AAAbdullah Alzahrani
Abdullah Alzahrani
NNN. Nasimuddin
N. Nasimuddin
Ali Ahmed SalemAli Ahmed Salem
Ali Ahmed Salem
Sherif GhoneimSherif Ghoneim
Sherif Ghoneim
Metasurface (MS) absorbers with polarization-insensitivity and wide-angle reception features have attracted much attention due to their unique absorption property. A polarization-insensitive broadband MS absorber structure, having wide-angle reception based on square split-ring resonators (SSRRs) and loaded with lumped resistors, is proposed in this paper. The proposed MS unit cell consists of a fixed-thickness FR4 dielectric substrate and a variable air-thickness substrate. The simulation results show that the proposed MS absorber is stable across a wide angular range for both normal and oblique incidences. Furthermore, the simulated results show that some parameters, such as unit-cell geometry and lumped resistors, can be varied to improve the performance of the MS absorber. The experimental results indicate that the proposed MS absorber can be achieved an absorption higher than 90% across the frequency range from 1.89 GHz to 6.85 GHz with a relative bandwidth of 113%, which is in agreement with simulation results. Thus, the proposed MS absorber can be more suitable in RF energy harvesting or wireless power transfer applications.

6 July 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
ABDULRAHMAN A. G AMERABDULRAHMAN A. G AMER
ABDULRAHMAN A. G AMER
NONurmiza Othman
Nurmiza Othman
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
AAArokiaswami Alphones
Arokiaswami Alphones
MHMohd Fahrul Hassan
Mohd Fahrul Hassan
ZAHRILADHA ZAKARIAZAHRILADHA ZAKARIA
ZAHRILADHA ZAKARIA
A dual-band metasurface (MS) with a wide reception angle operating at Wi-Fi bands (2.4 GHz and 5.4 GHz) is presented for electromagnetic (EM) energy harvesting applications. The MS unit cell comprises a subwavelength circular split ring resonator printed on the low-loss substrate. An air layer is sandwiched between two low-loss substrates to enhance the harvesting efficiency at operating frequencies. One of the main advantages of the proposed MS is that it uses only one harvesting port (via) to channel the captured power to the optimized load (50 Ω), which simplifies the design of a combined power network. According to the results of full-wave EM simulations, the proposed MS has a near-unity efficiency of 97% and 94% at 2.4 GHz and 5.4 GHz, respectively, for capturing the power of incident EM waves with normal incidence. Furthermore, the proposed MS harvester achieves good performance at up to 60° oblique incidence. To validate simulations, the MS harvester with 5 × 5-unit cells is fabricated and tested, and its EM properties are measured, showing good agreement with the simulation results. Because of its high efficiency, the proposed MS harvester is suitable for use in various microwave applications, such as energy harvesting and wireless power transfer.
1

29 September 2022 in Journal of Electromagnetic Waves and Applications
Verified
Journal Article
Closed access
ABDULRAHMAN A. G AMERABDULRAHMAN A. G AMER
ABDULRAHMAN A. G AMER
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
AAAdel Y. I. Ashyap
Adel Y. I. Ashyap
This work introduces a miniaturized metasurface (MS) energy harvester operating at 5.54 GHz with a high capture efficiency and a wide incident angle. The proposed MS structure is comprised of an ensemble of electric ring resonator (ERR) array. The MS's impedance is engineered to match free space, so that the incident electromagnetic (EM) power is efficiently captured with minimal reflection and delivered to the optimal resistor load through an optimally positioned metallic-via. According to the simulation results obtained by CST Microwave Studio, the proposed MS harvester achieves higher conversion efficiency of about 91% under normal incidence and more than 78% across a wider incident angle up to 60°. In order to verify the simulation results, a 5×5 cell array of the proposed MS harvester is fabricated and tested. The simulation and experimental results are well match. The proposed MS configuration can be attractive for high-efficiency and compact wireless sensor network harvesting systems.

21 December 2023 in IEEE Access
Verified
Journal Article
Open access
AAAbdulrahman Ahmed Ghaleb Amer
Abdulrahman Ahmed Ghaleb Amer
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
NONurmiza Binti Othman
Nurmiza Binti Othman
ASAli Ahmed Salem
Ali Ahmed Salem
AAAhmed Jamal Abdullah Al-Gburi
Ahmed Jamal Abdullah Al-Gburi
ZAHRILADHA ZAKARIAZAHRILADHA ZAKARIA
ZAHRILADHA ZAKARIA
This work introduces a wideband metamaterial (MM) absorber designed to operate effectively across a wide reception angle and be polarization-insensitive within ISM band (2.4 GHz) applications. The proposed absorber unit cell comprises four copper sectors loaded with lumped resistors and a full copper ground plane hosted onto two FR4 substrates. Furthermore, an air layer suspended between the ground plane and a FR4 substrate is applied to achieve wideband absorption. In addition, the simulation results show that particular design factors, such as lumped resistors and unit cell geometry, can be optimized to improve the efficiency of the absorber. The simulations demonstrate that the proposed absorber achieves a wideband absorption, exceeding 90%, over a broad frequency range from 1.94 GHz to 2.98 GHz. The designed absorber was fabricated and tested, and the simulation and measurement results were agreed well.

20 May 2016 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
ASAhmed Mohammed Sayegh
Ahmed Mohammed Sayegh
MJMohd Zarar Bin Mohd Jenu
Mohd Zarar Bin Mohd Jenu
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
SDS. H. Dahlan
S. H. Dahlan
In this paper, a novel analytical solution was presented for estimating the maximum differential-mode (DM) radiated emission from electrically long PCB traces using transmission-line theory, travelling wave antenna, and far-field magnetic vector potential. The analytical solution was simplified for matched load in which only forward travelling wave was considered. Additionally, a simple expression for predicting maximum DM-RE from electrically short traces was obtained using proper simplifications. The results from the proposed analytical model were then compared to the results obtained from 3-D HFSS full-wave simulation and the measurement performed in a semianechoic chamber. Good agreements within ±3 dB were obtained over a wide range of frequency.

1 November 2017
Verified
Conference Paper
Closed access
NHNazurah Hamzah
Nazurah Hamzah
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
ASAhmed M. Sayegh
Ahmed M. Sayegh
MJMohd Zarar M. Jenu
Mohd Zarar M. Jenu
NNN. Nasimuddin
N. Nasimuddin
In this paper, a simple, low cost, compact, portable and automatic measurement system is proposed for radiation patterns of antenna. Proposed system consists of a designed rotary stage, an USB signal generator and a spectrum analyzer. A stepper motor based rotary stage is employed to control automatically the 3600 rotation of the receiving antenna using LABVIEW software and Arduino hardware control system. The receiving antenna is then connected to the spectrum analyzer via GPIB interface. The radiation pattern is then plotted in real time on GUI interface developed based LABVIEW software. The proposed system is verified by comparing the results taken of this system with other existed results. A good agreement is obtained between them which enable this portable system can be utilized for both commercial and educational purposes.