ABDULRAHMAN A. G AMER

Dr. ABDULRAHMAN A. G AMER

Tun Hussein Onn University of Malaysia, Batu Pahat, Johor, Malaysia
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 April 2020 in IEEE Access
Verified
Journal Article
Open access
ABDULRAHMAN A. G AMERABDULRAHMAN A. G AMER
ABDULRAHMAN A. G AMER
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
NNN. Nasimuddin
N. Nasimuddin
AAArokiaswami Alphones
Arokiaswami Alphones
NZNabiah Binti Zinal
Nabiah Binti Zinal
Energy harvesting (EH) or scavenging is recognized as harvesting energy from ambient energy sources in the surrounding environment. This paper reports a literature review on radio frequency (RF) EH using different metasurface/metamaterial structures based on split-ring resonators (SRRs), electric inductive–capacitive (ELC) resonators, square-patch unit cells, square-ring unit cells, etc. The essential parameters in rectifying antenna (rectenna) design are included, such as receiving antenna efficiency, conversion efficiency, dimensions, supporting substrate properties, frequency band, and overall performance, etc. It is noted that rectenna design using conventional antennas such as microstrip antennas, monopole antennas, slot antennas, dielectric resonator antennas, etc. suffers from low power conversion efficiency with larger size. To overcome the above-mentioned constraints and enhance the conversion efficiency with smaller size, metasurface/metamaterial structures are used as EH collectors. An introduction to EH is discussed, followed by an overview of energy sources in the ambient environment. Several hypothetical and experimental studies on metasurface-based EH systems are summarized.

24 June 2022 in Electronics
Verified
Journal Article
Open access
PDF file
ABDULRAHMAN A. G AMERABDULRAHMAN A. G AMER
ABDULRAHMAN A. G AMER
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
AAAbdullah Alzahrani
Abdullah Alzahrani
NNN. Nasimuddin
N. Nasimuddin
Ali Ahmed SalemAli Ahmed Salem
Ali Ahmed Salem
Sherif GhoneimSherif Ghoneim
Sherif Ghoneim
Metasurface (MS) absorbers with polarization-insensitivity and wide-angle reception features have attracted much attention due to their unique absorption property. A polarization-insensitive broadband MS absorber structure, having wide-angle reception based on square split-ring resonators (SSRRs) and loaded with lumped resistors, is proposed in this paper. The proposed MS unit cell consists of a fixed-thickness FR4 dielectric substrate and a variable air-thickness substrate. The simulation results show that the proposed MS absorber is stable across a wide angular range for both normal and oblique incidences. Furthermore, the simulated results show that some parameters, such as unit-cell geometry and lumped resistors, can be varied to improve the performance of the MS absorber. The experimental results indicate that the proposed MS absorber can be achieved an absorption higher than 90% across the frequency range from 1.89 GHz to 6.85 GHz with a relative bandwidth of 113%, which is in agreement with simulation results. Thus, the proposed MS absorber can be more suitable in RF energy harvesting or wireless power transfer applications.

6 July 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
ABDULRAHMAN A. G AMERABDULRAHMAN A. G AMER
ABDULRAHMAN A. G AMER
NONurmiza Othman
Nurmiza Othman
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
AAArokiaswami Alphones
Arokiaswami Alphones
MHMohd Fahrul Hassan
Mohd Fahrul Hassan
ZAHRILADHA ZAKARIAZAHRILADHA ZAKARIA
ZAHRILADHA ZAKARIA
A dual-band metasurface (MS) with a wide reception angle operating at Wi-Fi bands (2.4 GHz and 5.4 GHz) is presented for electromagnetic (EM) energy harvesting applications. The MS unit cell comprises a subwavelength circular split ring resonator printed on the low-loss substrate. An air layer is sandwiched between two low-loss substrates to enhance the harvesting efficiency at operating frequencies. One of the main advantages of the proposed MS is that it uses only one harvesting port (via) to channel the captured power to the optimized load (50 Ω), which simplifies the design of a combined power network. According to the results of full-wave EM simulations, the proposed MS has a near-unity efficiency of 97% and 94% at 2.4 GHz and 5.4 GHz, respectively, for capturing the power of incident EM waves with normal incidence. Furthermore, the proposed MS harvester achieves good performance at up to 60° oblique incidence. To validate simulations, the MS harvester with 5 × 5-unit cells is fabricated and tested, and its EM properties are measured, showing good agreement with the simulation results. Because of its high efficiency, the proposed MS harvester is suitable for use in various microwave applications, such as energy harvesting and wireless power transfer.
1

29 September 2022 in Journal of Electromagnetic Waves and Applications
Verified
Journal Article
Closed access
ABDULRAHMAN A. G AMERABDULRAHMAN A. G AMER
ABDULRAHMAN A. G AMER
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
AAAdel Y. I. Ashyap
Adel Y. I. Ashyap
This work introduces a miniaturized metasurface (MS) energy harvester operating at 5.54 GHz with a high capture efficiency and a wide incident angle. The proposed MS structure is comprised of an ensemble of electric ring resonator (ERR) array. The MS's impedance is engineered to match free space, so that the incident electromagnetic (EM) power is efficiently captured with minimal reflection and delivered to the optimal resistor load through an optimally positioned metallic-via. According to the simulation results obtained by CST Microwave Studio, the proposed MS harvester achieves higher conversion efficiency of about 91% under normal incidence and more than 78% across a wider incident angle up to 60°. In order to verify the simulation results, a 5×5 cell array of the proposed MS harvester is fabricated and tested. The simulation and experimental results are well match. The proposed MS configuration can be attractive for high-efficiency and compact wireless sensor network harvesting systems.

1 April 2025 in Electronics
Verified
Journal Article
Open access
PDF file
FGFayad Ghawbar
Fayad Ghawbar
JSJumadi A. Sukur
Jumadi A. Sukur
Huda Bin MajidHuda Bin Majid
Huda Bin Majid
MBMohammed Bait-Suwailam
Mohammed Bait-Suwailam
HAHassan Al-Lawati
Hassan Al-Lawati
AGAimi S. A. Ghafar
Aimi S. A. Ghafar
This research introduces a compact, self-isolated, 12 × 12 multiple-input multiple-output (MIMO) antenna array designed for 5G mobile applications, operating within the 3.5 GHz band (3.42–3.62 GHz). The array consists of two distinct sets of six antenna elements—inverted U-shaped and T-shaped structures, each incorporating two circular and I-shaped strips—arranged symmetrically within the smartphone chassis. Each antenna element measures 15 × 5 mm2 (0.17λo × 0.06λo), where λo represents the free-space wavelength at 3.5 GHz. These elements function simultaneously as radiators and isolators, achieving high isolation levels. Additionally, the 12-MIMO antenna elements, designed to be self-isolated, are fabricated on both sides of two compact FR-4 substrates, positioned orthogonally to the ground substrate. This perpendicular configuration augments the self-isolating mechanism. The scattering parameters (s-parameter) findings demonstrate significant decoupling measuring under −19 dB across neighboring 12-MIMO elements. Moreover, the MIMO performance metrics, including channel capacity loss (CCL), total active reflection coefficient (TARC), diversity gain (DG), and the envelope correlation coefficient (ECC), are presented to be below 0.08 bits/s/Hz, −10 dB, 9.97 dB, and 0.006 consecutively. The significant isolation and performance metrics results notably indicate that the presented 12-MIMO antenna system is well-suited for 5G communication systems.

27 September 2020
Verified
Conference Paper
Closed access
ABDULRAHMAN A. G AMERABDULRAHMAN A. G AMER
ABDULRAHMAN A. G AMER
SSSyarfa Zahirah Sapuan
Syarfa Zahirah Sapuan
NNNasimuddin Nasimuddin
Nasimuddin Nasimuddin
A microwave metasurface (MS) absorber for ISM band applications is proposed and studied. The proposed MS structure consists of two metallic layers separated by two dielectric FR4 materials with a thickness of 1.6 mm. An air gap with a thickness of 10 mm placed between the dielectric layers. The proposed MS absorber exhibits near-unity absorption and wider absorption bandwidth at an operating frequency of 2.4 GHz under normal incidence. For oblique incidence, it shows wider absorption bandwidth and an absorption value of more than 93% for different incident angles for TEM-mode and more than 93% at for TE mode. Moreover, a numerical analysis presented to explain the physical interpretation of the absorption mechanism in detail.