This paper deals with the design, and laboratory implementation of a full scale, physical simulator of an all silicon carbide (SiC) traction motor drive for Light-Rail Transit Systems (LRTS) with on-board super-capacitor energy storage system (ESS). It consists of a PWM rectifier representing the 750 V DC catenary line, a three-phase two-level PWM traction inverter to drive a three-phase squirrel-cage traction motor, a flywheel coupled to the motor shaft to represent the dynamic behaviour of the transportation vehicle, a loading generator connected to the grid via DC link converter with active front-end, and a supercapacitor ESS containing a bidirectional DC/DC converter supplied from the common DC link. PWM rectifier, traction inverter and bidirectional DC/DC converter are all SiC power MOSFET based converters for high efficiency and high power density. The physical simulator is a valuable tool in the design and testing of all SiC converters. It is equipped with software programs for catenary model, rail-track model and vehicle model, and permits the performance verification of various control, modulation, and energy saving strategies. The physical simulator system developed in this research work allows the performance verification of a vehicle formation on a pre-specified real track and evaluation of benefits of the on-board supercapacitor ESS in real-time.
12 May 2022 in IEEE Transactions on Industry Applications
In this paper, harris hawks optimization (HHO) for selective harmonic elimination method (SHEM) of a voltage source inverter has been applied to a traction motor drive for light rail transportation. The main objective of SHEM's pulse-width modulation strategy is to remove the low-order harmonics by solving nonlinear equations while satisfying the required fundamental component's magnitude. The HHO applied in this paper to a two-level, three-phase inverter aims at solving the associated nonlinear equations with a high accuracy and convergence probability as a strong metaheuristic algorithm. SHEM simulations are carried out via MATLAB / Simulink on a 125 kW traction motor drive platform for various SHEM angles to verify its performance in comparison with the SHEM with SPWM and SVM techniques. Experimental results obtained on a physical simulator of the light rail transportation system in the laboratory have shown remarkable findings in view of the DC link voltage magnitude on the performance of the associated traction motor drive. In the light of different fundamental frequency operations, the number of SHEM angles, and operating DC link voltages, a general evaluation of the SHEM has been made in considering its application to a light rail traction motor drive. It has also been shown that the application of online SHEM on a GPU framework is possible in real-time.
The design and development of a high-performance 165 kVA, 750 V DC all-silicon carbide (SiC) traction converter for new generation light rail transportation systems (LRTSs) are described. In the design of the traction motor drive, the efficiency of the overall system is maximized and the line current harmonic content of the traction motor is minimized. A complete mathematical model of the physical system is derived to carry out real-time simulations and proper control of the LRTS on a real rail track. The electrical and thermal performances of traction-type SiC power MOSFET modules are compared with those of alternative hybrid and Si-IGBT modules for various switching frequencies. The implementation of the developed system is also described. The performance of the resulting system is verified experimentally on a full-scale physical simulator as well as for various track conditions. Very promising results for the next generation railway traction motor drives have been obtained in terms of performance criteria, such as very high efficiency, low harmonic distortion of the motor line current, low cooling requirement, relatively high switching frequency, and hence, superior controller performance. The effects of the SiC power MOSFET operation on the insulation of the available traction motors are also examined experimentally. This paper is accompanied by a video demonstrating the experimental work.