Isik CADIRCI

Prof. Isik CADIRCI

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 September 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
DYDOĞAN YILDIRIM
DOĞAN YILDIRIM
MAMehmet Hakan Akşit
Mehmet Hakan Akşit
CYCem Yolacan
Cem Yolacan
TPTevfik Pul
Tevfik Pul
CECezmi Ermis
Cezmi Ermis
MEMuammer Ermiş
Muammer Ermiş
This paper deals with the design, and laboratory implementation of a full scale, physical simulator of an all silicon carbide (SiC) traction motor drive for Light-Rail Transit Systems (LRTS) with on-board super-capacitor energy storage system (ESS). It consists of a PWM rectifier representing the 750 V DC catenary line, a three-phase two-level PWM traction inverter to drive a three-phase squirrel-cage traction motor, a flywheel coupled to the motor shaft to represent the dynamic behaviour of the transportation vehicle, a loading generator connected to the grid via DC link converter with active front-end, and a supercapacitor ESS containing a bidirectional DC/DC converter supplied from the common DC link. PWM rectifier, traction inverter and bidirectional DC/DC converter are all SiC power MOSFET based converters for high efficiency and high power density. The physical simulator is a valuable tool in the design and testing of all SiC converters. It is equipped with software programs for catenary model, rail-track model and vehicle model, and permits the performance verification of various control, modulation, and energy saving strategies. The physical simulator system developed in this research work allows the performance verification of a vehicle formation on a pre-specified real track and evaluation of benefits of the on-board supercapacitor ESS in real-time.

15 September 2017 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
SÖSerkan Öztürk
Serkan Öztürk
ICIsik CADIRCI
Isik CADIRCI
In this paper, design and implementation of a flyback photovoltaic (PV) microinverter based on the Direct Digital Synthesis (DDS) technique, has been described for both the standalone and the grid-connected operation. The DDS technique adopted provides flexibility in the implementation of various control schemes of the PV microinverter on a simple, low-cost dsPIC microcontroller. As compared to the conventional look-up-table method used for generating sinusoidal output voltage waveforms by digital signal processing, a much higher resolution can be obtained in the voltage phase angle and magnitude owing to the adaptive nature of the look-up table implemented within the DDS architecture. The DDS technique is used in the implementation of all control schemes of a PV microinverter such as maximum power point tracking (MPPT), phase-locked-loop (PLL), anti-islanding, and low-voltage ride-though (LVRT), with an integrated software run on a simple microcontroller. A dedicated computer simulation model is developed, where the PV panel model, the PLL in DQ reference frame, the MPPT algorithm, and the anti-islanding and LVRT features are all taken into account. The experimental results obtained on a 120-W PV flyback microinverter have verified the validity of the proposed technique for both the steady-state and the transient-state operation. The DDS technique is thus found to be quite convenient for application to module integrated converters.

12 March 2012 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
ATAlper Terciyanli
Alper Terciyanli
AAAdnan Acik
Adnan Acik
ACAlper Cetin
Alper Cetin
MEMuammer Ermiş
Muammer Ermiş
ICIsik CADIRCI
Isik CADIRCI
HBHazım Faruk Bilgin
Hazım Faruk Bilgin
In this paper, the combination of a thyristor-switched shunt reactor and a current source converter-based active power filter has been proposed for mitigation of power quality (PQ) problems of Light Rail public Transportation Systems (LRTSs) fed by long medium-voltage underground cables. A case study has been carried out on a typical LRTS to assess the performance of the proposed solution for both capacitive reactive power compensation of underground cables and harmonic filtering of 12-pulse catenary rectifiers. It has been shown by extensive field tests carried out that this solution meets the requirements satisfactorily, thus constituting a complete solution to the PQ problems of LRTS. Conventional PQ solutions have been also assessed, and the corresponding theoretical results are given in comparison with the proposed system.

12 May 2022 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
GNGamze Nalcaci
Gamze Nalcaci
DYDOĞAN YILDIRIM
DOĞAN YILDIRIM
ICIsik CADIRCI
Isik CADIRCI
MEMuammer Ermiş
Muammer Ermiş
In this paper, harris hawks optimization (HHO) for selective harmonic elimination method (SHEM) of a voltage source inverter has been applied to a traction motor drive for light rail transportation. The main objective of SHEM's pulse-width modulation strategy is to remove the low-order harmonics by solving nonlinear equations while satisfying the required fundamental component's magnitude. The HHO applied in this paper to a two-level, three-phase inverter aims at solving the associated nonlinear equations with a high accuracy and convergence probability as a strong metaheuristic algorithm. SHEM simulations are carried out via MATLAB / Simulink on a 125 kW traction motor drive platform for various SHEM angles to verify its performance in comparison with the SHEM with SPWM and SVM techniques. Experimental results obtained on a physical simulator of the light rail transportation system in the laboratory have shown remarkable findings in view of the DC link voltage magnitude on the performance of the associated traction motor drive. In the light of different fundamental frequency operations, the number of SHEM angles, and operating DC link voltages, a general evaluation of the SHEM has been made in considering its application to a light rail traction motor drive. It has also been shown that the application of online SHEM on a GPU framework is possible in real-time.

31 May 2018 in Electronics
Verified
Journal Article
Open access
PDF file
SÖSerkan Öztürk
Serkan Öztürk
MCMehmet Canver
Mehmet Canver
ICIsik CADIRCI
Isik CADIRCI
MEMuammer Ermiş
Muammer Ermiş
Design methodology and implementation of an all SiC power semiconductor-based, grid-connected multi-string photovoltaic (PV) supply with an isolated high frequency (HF) link maximum power point tracker (MPPT) have been described. This system configuration makes possible the use of a simple and reliable two-level voltage source inverter (VSI) topology for grid connection, owing to the galvanic isolation provided by the HF transformer. This topology provides a viable alternative to the commonly used non-isolated PV supplies equipped with Si-based boost MPPT converters cascaded with relatively more complex inverter topologies, at competitive efficiency figures and a higher power density. A 20 kHz, 25 kVA prototype system was designed based on the dynamic model of the multi-string PV panels obtained from field tests. Design parameters such as input DC link capacitance, switching frequencies of MPPT converter and voltage source inverter, size and performance of HF transformer with nanocrystalline core, DC link voltage, and LCL filter of the VSI were optimized in view of the site dependent parameters such as the variation ranges of solar insolation, module surface temperature, and grid voltage. A modified synchronous reference frame control was implemented in the VSI by applying the grid voltage feedforward to the reference voltages in abc axes directly, so that zero-sequence components of grid voltages are taken into account in the case of an unbalanced grid. The system was implemented and the proposed design methodology verified satisfactorily in the field on a roof-mounted 23.7 kW multi-string PV system.

1 May 2007
Verified
Conference Paper
Closed access
TDTuran Demirci
Turan Demirci
SBSemih Bilgen
Semih Bilgen
USUmut Sezen
Umut Sezen
ICIsik CADIRCI
Isik CADIRCI
MEMuammer Ermiş
Muammer Ermiş
BPBeyhan Polat
Beyhan Polat
In this paper a nationwide power quality monitoring system, which computes and collects PQ parameters and the required waveforms at a power quality monitoring center for both the purposes of early warning and later analysis of power quality of the whole transmission system, is presented. The system consists of three basic units: PQ monitors connected to various transformer substations all over the country; a national PQ monitoring center which communicates with all PQ monitors regularly, receives PQ data and archives them; and finally a client software, which lets individuals connect to the national PQ center and run searches on the PQ archive. The monitors compute PQ parameters based on the IEC Standard-61000-4-30. The client software will be available to the Electricity Transmission System Corporation of Turkey, TEIAS, distribution companies, large industrial plants which are directly supplied from the transmission system, research institutes and the universities. This is a three-year project of the Scientific and Technological Research Council of Turkey, TUBITAK, which started in March 2006 and the already-developed prototype system is presented in this paper.