Siyang Zhong

Dr. Siyang Zhong


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2020 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
PZPeng Zhou
Peng Zhou
QLQian Liu
Qian Liu
SZSiyang Zhong
Siyang Zhong
YFYi Fang
Yi Fang
XZXin Zhang
Xin Zhang
In this study, we investigated the performance of flexible trailing edge serrations of various shapes for airfoil self-noise reduction through anechoic wind tunnel experiments. A flat plate model was tested at zero angle of attack. The chord-based Reynolds number was between 1.6 × 105 and 4 × 105. The boundary layers were fully tripped near the leading edge. Add-on type trailing edge serrations were cut from flexible polyethylene terephthalate sheets. It is observed that compared with rigid serrations, flexible serrations can achieve an additional broadband noise reduction up to 2 dB–3 dB at high frequencies, and the effect also depends on the geometry of the serrations. Complementary deformation measurement and aerodynamic force measurement show that flexible serrations can align better with the flow and are expected to reduce the crossflow intensity near the serration roots, which has been related to the extraneous high-frequency noise generated by serrations in previous studies. An inviscid model is proposed to predict the wake structure and the loadings for serrations of various shapes. Although the model over-predicts the crossflow speed due to the omission of the viscous effect, the relative intensity corresponding to different serration geometry is consistent with experimental observations. Last, we show that the recent analytical noise prediction model [B. Lyu and L. J. Ayton, “Rapid noise prediction models for serrated leading and trailing edges,” J. Sound Vib. 469, 115136 (2020)] for a serrated trailing edge still significantly overpredicts the noise reduction capacity by serrations and does not reveal the role of serration shape properly. This indicates the necessity to include the non-frozen turbulent properties near serrations in the future prediction models.

1 July 2022 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
HJHanbo Jiang
Hanbo Jiang
HWHan Wu
Han Wu
WCWangqiao Chen
Wangqiao Chen
PZPeng Zhou
Peng Zhou
SZSiyang Zhong
Siyang Zhong
BCBao Chen
Bao Chen
This work presents a high-efficiency low-noise propeller design for unmanned aerial vehicles. Three different blade configurations are first investigated, using the computational aeroacoustic approach to recognize the flow around propellers and the noise emissions. The flow simulation is obtained by an acoustic-wave preserved artificial compressibility method, and the far-field noise is extrapolated by solving the Ffowcs-Williams and Hawkings equations. Experiments are also conducted to validate numerical simulations and the design philosophy. The comparison between numerical and experimental results confirms an encouraging agreement regarding aerodynamic efficiency, noise spectra and differences between propellers. The results show that two designed propellers can simultaneously improve aerodynamic efficiency and reduce noise emissions compared to the baseline propeller. It is observed that using a longer chord length and shorter propeller radius can reduce flow separation at the trailing edge. Furthermore, a qualitative noise-source analysis shows that broadband noise sources are primarily ascribed to the time-derivative of blade surface pressure and occur at the trailing edge near the tip.

9 December 2020 in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
Verified
Journal Article
Open access
SZSiyang Zhong
Siyang Zhong
PZPeng Zhou
Peng Zhou
RFRyu Fattah
Ryu Fattah
XZXin Zhang
Xin Zhang
In this study, asymptotic analysis of the frequency-domain formulation to compute the tonal noise of the small rotors in the now ubiquitously multi-rotor powered drones is conducted. Simple scaling laws are proposed to evaluate the impacts of the influential parameters such as blade number, flow speed, rotation speed, unsteady motion, thrust and observer angle on the tonal noise. The rate of noise increment with thrust (or rotational speed) is determined by orders of blade passing frequency harmonics and the unsteady motion. The axial mean flow influence can be approximated by quadratic functions. At given thrust, the sound decreases rapidly with the radius and blade number as the surface pressure becomes less intensive. The higher tonal harmonics are significantly increased if unsteady motions, although of small-amplitude, are existed, as indicated by the defined sensitivity function, emphasizing that the unsteady motions should be avoided for quiet rotor designs. The scaling laws are examined by comparing with the full computations of the rotor noise using the frequency-domain method, the implementation of which has been validated by comparing with experiments. Good data collapse is obtained when the proposed scaling laws, which highlights the dominant influence of the design parameters, are incorporated.

1 February 2023 in Journal of Fluid Mechanics
Verified
Journal Article
Open access
PDF file
SZSiyang Zhong
Siyang Zhong
PZPeng Zhou
Peng Zhou
WCWangqiao Chen
Wangqiao Chen
HJHanbo Jiang
Hanbo Jiang
HWHan Wu
Han Wu
XZXin Zhang
Xin Zhang
The aeroacoustic characteristics of flying vehicles with pitch-fixed rotors differ from traditional helicopters with pitch-controlled rotor blades. Accurate predictions of rotor noise are still challenging because many uncertainty factors and unsteadinesses exist. This work investigates the aeroacoustic effects of rotational speed deviation, rotation speed fluctuation, blade vibration and blade geometric asymmetry. The analysis is based on the efficient computation of rotor noise under different working conditions. The mean aerodynamic variables are computed using the blade element moment theory, while small-amplitude fluctuations are introduced to account for the unsteadiness and uncertainty factors. It is shown that periodic rotation speed fluctuations and blade vibrations can produce significant extra tones. By contrast, if the fluctuations and vibrations are random, the noise level in a wide frequency range is increased. The intriguing result reminds us of the need to revisit the rotor broadband noise sources commonly attributed to turbulent flows. The influences are observer angle dependent, and the extra noise production is more significant in the upstream and downstream directions. The asymmetric blade geometry can cause extra tonal noise at the harmonics of the blade shaft frequency. The noise features of dual rotors are also investigated. Usually, the noise is sensitive to the initial phase difference and rotation directions due to the interference effect. However, the noise features are vastly altered if there are slight differences in the rotation speeds. Although the influences of some factors on rotor noise were already known, the present study provides a more comprehensive analysis of the problem. The results also highlight the need to consider these practical factors for accurate noise prediction of multi-rotor flying vehicles.

16 October 2013 in The Journal of the Acoustical Society of America
Verified
Journal Article
Closed access
SZSiyang Zhong
Siyang Zhong
QWQingkai Wei
Qingkai Wei
XHXun Huang
Xun Huang
Compressive sensing, a newly emerging method from information technology, is applied to array beamforming and associated acoustic applications. A compressive sensing beamforming method (CSB-II) is developed based on sampling covariance matrix, assuming spatially sparse and incoherent signals, and then examined using both simulations and aeroacoustic measurements. The simulation results clearly show that the proposed CSB-II method is robust to sensing noise. In addition, aeroacoustic tests of a landing gear model demonstrate the good performance in terms of resolution and sidelobe rejection.

25 May 2021 in Journal of Fluid Mechanics
Verified
Journal Article
Open access
PDF file
PZPeng Zhou
Peng Zhou
SZSiyang Zhong
Siyang Zhong
XZXin Zhang
Xin Zhang
This study is inspired by the velvety structures on an owl's upper wing surface. Anechoic wind tunnel experiments were conducted to study the effect of the velvety structures on trailing edge noise as well as the boundary layer flow of a flat plate model. The tests were conducted in The Hong Kong University of Science and Technology low-speed wind tunnel, ultra-quiet noise injection test and evaluation device (UNITED). It was found that the trailing edge noise spectra are significantly modified by the velvety structures. In general, the velvety structures increase the low-frequency noise below a cross-over Strouhal number $St_c$ but reduce the spectral level at higher frequencies. The velvety surface also changes the boundary layer characteristics in terms of the boundary layer thickness, non-dimensional velocity distribution and turbulence distribution. Vortex shedding is suppressed by the velvety coating despite the blunt trailing edge. An analytic model is proposed for the trailing edge noise of a flat plate, including the effect of finite trailing edge thickness and velvety structures on the flat plate surface. The model uses the near wake distribution of the mean and fluctuating velocities in the streamwise direction as the input. The predictions, which require no empirical corrections, match well with the experiments for both the baseline and velvet-coated configurations. With a detailed non-dimensional analysis, this study proposes a potential aeroacoustic function of velvet structures, i.e. noise control through manipulation of boundary layer statistics.