Engineered stone (ENS) is a type of artificial stone composed of stone wastes bonded together by a polymeric matrix. ENS presents a profitable alternative for solid waste management, since its production adds value to the waste by reusing it as raw material and reduces environmental waste disposal. The present work’s main goal is to produce an ENS based on quartz powder waste, glass packaging waste, and epoxy resin. The wastes were size-distributed by the fine sieving method. Then, the closest-packed granulometric mixture, as well as the minimum amount of resin that would fill the voids of these mixtures, was calculated. ENS plates were prepared with 15%wt (ENS-15) and 20%wt (ENS-20) epoxy resin by vibration, compression (10 tons for 20 min at 90 °C), and vacuum of 600 mmHg. The plates were sanded and cut for physical, chemical, and mechanical tests. Scanning electron microscopy analysis of fractured specimens was performed. ENS-15 presented 2.26 g/cm3 density, 0.1% water absorption, 0.21% apparent porosity, and 33.5 MPa bend strength and was resistant to several chemical and staining agents. The results classified ENS as a high-quality coating material, technically and economically viable, with properties similar to commercial artificial stones. Therefore, the development of ENS based on waste glass and quartz powder meets the concept of sustainable development, as this proposed novel material could be marketed as a building material and simultaneously minimize the amount of these wastes that are currently disposed of in landfills.
Brazil is one of the world’s major ornamental stone producers. As a consequence, ornamental stone wastes are generated on a large scale and are usually open air disposed. Thus, it is important to develop novel material reusing these accumulated wastes, aiming to minimize environmental impact. The development of artificial stones made with ornamental stone wastes agglomerated by a synthetic polymer represents an excellent alternative and, therefore, is currently the subject of several works. This work seeks to develop an innovative artificial stone containing 85%wt of granite waste and 15%wt of vegetable polyurethane from castor oil, a biodegradable resin, from a renewable source. The purpose is creating a sustainable material, technically viable to be applied as a civil construction coating. To manufacture the artificial stone plates, granite and polyurethane were mixed and transferred to a metallic mold subjected to vibration, vacuum and, later, hot compression. The artificial stone presented low water absorption (0.13%) and apparent porosity (0.31%) as well as a favorable 17.31 MPa bend strength. These results were confirmed through the excellent particles/matrix adhesion displayed in the micrographs, in addition to great chemical resistance.
Novel civil construction materials based on waste can be an optimal alternative for waste management, reducing its improper disposal while engaging an otherwise discarded material as a raw material in other production processes. This research’s main objective was to develop and characterize two novel artificial stones based on waste glass from bottles and aggregated with epoxy resin (ASG-EP) and polyurethane resin (ASG-PU) from castor oil, respectively, as well as the comparison of the two developed materials. Plates were manufactured with 15% of epoxy or 15% polyurethane resins and 85% of waste glass from bottles. The mixture was molded with a process of 6Hz vibration, 600mmHg of vacuum, and hot compaction at 90ºC for EP and 80ºC for PU. Results evidenced that the development of ASGs based on waste glass from bottles is technically and economically viable.