Geopolymer materials have been gaining ground in the civil construction sector not only for having superior physical properties when compared to conventional cement, but also for being less harmful to the environment, since the synthesis of the geopolymer does not release toxic gases or require high energy costs. On the other hand, geopolymer materials like cementitious matrices have low flexural strength and have fragile breakage. To overcome these deficiencies, the insertion of fibers in geopolymeric matrices has been evaluated as a solution. Although most research on this practice focuses on the use of synthetic fibers, the use of natural fibers has been growing and brings as an advantage the possibility of producing an even more ecological material, satisfying the need to create eco-friendly materials that exists today in society. Thus, this paper aimed to, through the evaluation of research available in the literature, understand the behavior of fibers in geopolymer matrices, identify similarities and differences between the performance of geopolymer composites reinforced with natural and synthetic fibers and, understanding that it is possible, point out ways to optimize the performance of these composites.

This review article proposes the identification and basic concepts of materials that might be used for the production of high-performance concrete (HPC) and ultra-high-performance concrete (UHPC). Although other reviews have addressed this topic, the present work differs by presenting relevant aspects on possible materials applied in the production of HPC and UHPC. The main innovation of this review article is to identify the perspectives for new materials that can be considered in the production of novel special concretes. After consulting different bibliographic databases, some information related to ordinary Portland cement (OPC), mineral additions, aggregates, and chemical additives used for the production of HPC and UHPC were highlighted. Relevant information on the application of synthetic and natural fibers is also highlighted in association with a cement matrix of HPC and UHPC, forming composites with properties superior to conventional concrete used in civil construction. The article also presents some relevant characteristics for the application of HPC and UHPC produced with alkali-activated cement, an alternative binder to OPC produced through the reaction between two essential components: precursors and activators. Some information about the main types of precursors, subdivided into materials rich in aluminosilicates and rich in calcium, were also highlighted. Finally, suggestions for future work related to the application of HPC and UHPC are highlighted, guiding future research on this topic.

Natural cellulose-based fibers offer low cost, low density composite reinforcement with good strength and stiffness. Because of their annual renewability and biodegradability, natural fibers have materialized as environmentally-friendly alternatives to synthetic fibers in the last two decades. They are replacing synthetic materials in some traditional composites in industrial manufacturing sectors such as automotive, construction, furniture, and other consumer goods. In this work, the use of lignocellulosic fibers in green materials engineering, particularly their application as polymeric composite reinforcement and surface treatment via ionizing radiation are reviewed. Because these cellulose-based materials are intrinsically hydrophilic, they require surface modification to improve their affinity for hydrophobic polymeric matrices, which enhances the strength, durability, and service lifetime of the resulting lignocellulosic fiber-polymer composites. In spite of a long history of using chemical methods in the modification of material surfaces, including the surface of lignocellulosic fibers, recent research leans instead towards application of ionizing radiation. Ionizing radiation methods are considered superior to chemical methods, as they are viewed as clean, energy saving, and environmentally friendly. Recent applications of controlled ionizing radiation doses in the formulation of natural fiber –reinforced polymeric composites resulted in products with enhanced fiber-polymer interfacial bonding without affecting the inner structure of lignocellulosic fibers. These applications are critically reviewed in this contribution.

A novel class of graphene-based materials incorporated into natural lignocellulosic fiber (NLF) polymer composites is surging since 2011. The present overview is the first attempt to compile achievements regarding this novel class of composites both in terms of technical and scientific researches as well as development of innovative products. A brief description of the graphene nature and its recent isolation from graphite is initially presented together with the processing of its main derivatives. In particular, graphene-based materials, such as nanographene (NG), exfoliated graphene/graphite nanoplatelet (GNP), graphene oxide (GO) and reduced graphene oxide (rGO), as well as other carbon-based nanomaterials, such as carbon nanotube (CNT), are effectively being incorporated into NLF composites. Their disclosed superior mechanical, thermal, electrical, and ballistic properties are discussed in specific publications. Interfacial shear strength of 575 MPa and tensile strength of 379 MPa were attained in 1 wt % GO-jute fiber and 0.75 wt % jute fiber, respectively, epoxy composites. Moreover, a Young’s modulus of 44.4 GPa was reported for 0.75 wt % GO-jute fiber composite. An important point of interest concerning this incorporation is the fact that the amphiphilic character of graphene allows a better way to enhance the interfacial adhesion between hydrophilic NLF and hydrophobic polymer matrix. As indicated in this overview, two basic incorporation strategies have so far been adopted. In the first, NG, GNP, GO, rGO and CNT are used as hybrid filler together with NLF to reinforce polymer composites. The second one starts with GO or rGO as a coating to functionalize molecular bonding with NLF, which is then added into a polymeric matrix. Both strategies are contributing to develop innovative products for energy storage, drug release, biosensor, functional electronic clothes, medical implants, and armor for ballistic protection. As such, this first overview intends to provide a critical assessment of a surging class of composite materials and unveil successful development associated with graphene incorporated NLF polymer composites.