The identification of gemstones is an important topic in the field of cultural heritage, given their enormous value. Particularly, the most important precious stones, namely diamond, emerald, ruby and sapphire, are frequently subjected to counterfeit by substitution with objects of lesser value with similar appearance, colour or shape. While a gemmologist is able to recognise a counterfeit in most instances, more generally, it is not easy to do this without resorting to instrumental methods. In this work, the use of UV-visible diffuse reflectance spectrophotometry with optic fibres (FORS) is proposed as a fast and easy method for the preliminary identification of gemstones, alternative to the classical methods used by gemmologists or to Raman spectroscopy, which is by far the instrumental method with the best diagnostic potential, but it cannot be used in situations of problematic geometric hindrance. The possibilities and the limitations given by the FORS technique are critically discussed together with the spectral features of the most important gemstones. Finally, the application of chemometric pattern recognition methods is described for the treatment of large sets of spectral data deriving from gemstones identification.

The production chain of hazelnuts has been studied by analyzing three sets of samples produced in purity from three different pools of hazelnuts of cultivar “Tonda Gentile Trilobata”, “Tonda Gentile Romana” and “Mortarella”, all cultivated in Italy. From each pool, five processed products were obtained: roasted hazelnuts, hazelnut paste, hazelnut cream, Gianduja paste and Gianduiotto paste. After pre-treatment by means of dry ashing, all samples from each cultivar, including raw hazelnuts, were then analyzed by means of Inductively Coupled Plasma–Optical Emission Spectroscopy (ICP-OES) and Inductively Coupled Plasma–Mass Spectrometry (ICP-MS). A good discrimination was obtained among the different chain stages according to the distribution of the trace elements, as expected. More interesting was the discrimination among the different cultivars: it was possible to distinguish the samples produced from the respective cultivar by means of specific chemical markers, particularly Mo and Ni.

Recently, different methods have been proposed to develop wood materials, termed “densified woods”, with density increment and improvement in mechanical proprieties. Almost all the proposed methods involve the use of reducing agents and strong bases. In this work, a new method has been developed involving the use of less polluting agents. The formation of densified woods is divided into two steps: delignification involves the removal of lignin, hemicelluloses, and shorter chains of cellulose, whereas densification involves the plastering of the delignified woods. The obtained materials showed a density increase of two to four times. The obtained densified woods were characterized by spectroscopic, microscopic, and thermogravimetric techniques and mechanical tests. The characterizations aimed at determining the variations of chemical and structural compositions of the samples after delignification and densification processes, showing, respectively, a decrease in lignin and a significant increase in the density and force necessary to bring the materials to yield. The final density of wood was two to three times higher and the force necessary to reach the yield point reached more than three times the initial one for some of the studied samples. These characterizations showed how different woods, with different properties, reach comparable densities and final mechanical properties after delignification and densification process. The increased mechanical properties of the materials allow their application in place of other composite woody materials.